Search results for "NEWA"

DC/DC converter topologies for electrolyzers: State-of-the-art and remaining key issues.

2017

In recent years, the use of electrolyzers to produce cleanly and efficiently hydrogen from renewable energy sources (i.e. wind turbines, photovoltaic) has taken advantage of a growing interest from researchers and industrial. Similarly to fuel cells, DC/DC converters are needed to interface the DC bus with the electrolyzer. Usually, electrolyzers require a low DC voltage to produce hydrogen from water. For this reason, a DC/DC buck converter is generally used for this purpose. However, other DC/DC converter topologies can be used depending on the feature of the electrolyzer and electrical grid as well. The main purpose of this paper is to present the current state-of-the-art of DC/DC conver…

How does graphene enhance the photoelectric conversion efficiency of dye sensitized solar cells? An insight from a theoretical perspective

2019

The main goal of this work is to clearly answer the question from a theoretical perspective: how does graphene enhance the photoelectric conversion efficiency in the semiconducting layer of a dye sensitized solar cell? Several arrangements of the graphene layer between the dye molecule and the TiO2 (101) surface are carefully studied and discussed. The dynamic interfacial electron propagations are simulated with consideration of the underlying nuclear motion effect. Theoretical investigation shows that graphene can speed up the electron injection from the dye molecules to the semiconductor layer, only when the graphene sheet is bonded to the TiO2 surface via C–Ti bonds. The excited electron…

WITHDRAWN: Perspective on hydrogen energy carrier and its automotive applications

2013

Quadruple-Cation Wide-Bandgap Perovskite Solar Cells with Enhanced Thermal Stability Enabled by Vacuum Deposition.

2022

Vacuum processing of multicomponent perovskites is not straightforward, because the number of precursors is in principle limited by the number of available thermal sources. Herein, we present a process which allows increasing the complexity of the formulation of vacuum-deposited lead halide perovskite films by multisource deposition and premixing both inorganic and organic components. We apply it to the preparation of wide-bandgap CsMAFA triple-cation perovskite solar cells, which are found to be efficient but not thermally stable. With the aim of stabilizing the perovskite phase, we add guanidinium (GA+) to the material formulation and obtained CsMAFAGA quadruple-cation perovskite films wi…

Simultaneous non-invasive gas analysis in artificial photosynthesis reactions using rotational Raman spectroscopy

2022

Optimising reactions in artificial photosynthesis research requires screening of many reaction and operation parameters, which is often resource-intense and time-consuming. In this paper, we demonstrate the use of a rotational Raman-based spectrometer for non-invasive quantification of several gases (H2, O2, N2, CO, CO2) with short analysis times (15 s), enabling high throughput screening. Furthermore, with this device, reaction progress can be monitored in situ, by real-time simultaneous quantification of multiple gases. We have applied this instrument and developed a method to study the O2 dependency of a prototypic light-driven hydrogen evolution reaction, showcasing the value of this ap…

Online Meetings in Times of Global Crisis: Toward Sustainable Conferencing

2020

International conferences are an essential component of the timely exchange of ideas and results in the scientific community, where scientists present their results, gain new insights, and meet colleagues and collaborators. In early 2020, a global pandemic caused by a coronavirus (SARS-CoV-2) and the corresponding disease (covid-19) resulted in a number of conferences being canceled or postponed. (1) To foster scientific exchange despite the restrictions, a range of initiatives were launched across the globe to move international conferences online. (2−8) [...]

Sb2S3 solar cells with a cost-effective and dopant- free fluorene-based enamine as a hole transport material

2022

The “Development of Semi-Transparent Bifacial Thin Film Solar Cells for Innovative Applications” benefits from a 999372 € grant from Iceland, Liechtenstein and Norway through the EEA Grants. The aim of the project is to develop a new approach based on novel materials and structures and production technologies, which are the key to further increase the share, and range of applications of PV in areas with sub-average sunlight, including Baltic and Nordic countries. Therefore, development of resource saving, cost-effective and efficient PV devices is a primary challenge of this project. Project contract with the Research Council of Lithuania (LMTLT) No is S-BMT-21-1(LT08-2-LMT-K-01-003). The D…

Methanol fuel processor and PEM fuel cell modeling for mobile application

2010

International audience; The use of hydrocarbon fed fuel cell systems including a fuel processor can be an entry market for this emerging technology avoiding the problem of hydrogen infrastructure. This article presents a 1 kW low temperature PEM fuel cell system with fuel processor, the system is fueled by a mixture of methanol and water that is converted into hydrogen rich gas using a steam reformer. A complete system model including a fluidic fuel processor model containing evaporation, steam reformer, hydrogen filter, combustion, as well as a multi-domain fuel cell model is introduced. Experiments are performed with an IDATECH FCS1200™ fuel cell system. The results of modeling and experi…

A method for detecting malfunctions in PV solar panels based on electricity production monitoring

2017

In this paper a new method is developed for automatically detecting outliers or faults in the solar energy production of identical sets (sister arrays) of photovoltaic (PV) solar panels. The method involves a two-stage unsupervised approach. In the first stage, "in control" energy production data are created by using outlier detection methods and functional principal component analysis in order to remove global and local outliers from the data set. In the second stage, control charts for the "in control" data are constructed using both a parametric method and three non-parametric methods. The control charts can be used to detect outliers or faults in the production data in real-time or at t…

'Not as safe as I believed': Differences in perceived and self-reported cycling behavior between riders and non-riders

2021

Cycling behavior remains a key issue for explaining several traffic causalities occurring every day. However, recent studies have shown how the assessment of the own safety-related behaviors on the road may substantially differ from how third parties assess them. Thus, the aim of this study was to evaluate the differences between cyclists’ self-reported behavior and the proxy-reported behavior that other (non-cyclist) road users perceive from bike riders. For this purpose, this study used data from two samples: (i) 1064 cyclists (M = 32.83 years) answering the Cycling Behavior Questionnaire—CBQ, and (ii) 1070 non-cyclists (M = 30.83 years) answering an adapted version of the CBQ for externa…