Search results for "Nanoporous"
showing 10 items of 70 documents
Phase Composition and Nanoporous Structure of Core and Surface in the Modified Granules of NH4NO3
2018
The article deals with the study of phase composition and crystal nanoporous structure of core and surface layer of porous ammonium nitrate (PAN). The research results, presented in the article, show that the proposed way to generate PAN allows to provide the granule porous structure without changing of its phase composition. The crystal structure of granules after the humidification and heat treatment has some changes due to the increase of the number of pores. The change of crystal structure, in turn, allows to open access to nanopores that are located in the volume of granules. This allows to increase the holding capacity indicator of granules. An important result of conducted researches…
Preparation of Nanoporous MgAl2O4 by Combined Utilization of Sol-Gel Process and Combustion of Biorenewable Oil
2011
ABSTRACTNanoporous MgAl2O4 particulates with high porosities were successfully prepared from sol-gel reactions, solvent exchange with castor oil and subsequent combustion and calcination at 700 °C. The products were crystalline and semitransparent. Changes in the metal precursor concentrations allowed control of pore volumes from 0.7 to 1.1 cm3/g and average pore sizes from 14 to 19 nm. The specific surface areas are about 200 m2/g regardless of the precursor concentrations. After heating at 1000 °C for 10 hours, the products kept about 70% of their original pore volume and about 60% of the original surface area. Heating at 1100 °C caused a drastic reduction of pore volume and surface area …
Suppression of Forward Electron Injection from Ru(dcbpy)2(NCS)2 to Nanocrystalline TiO2 Film As a Result of an Interfacial Al2O3 Barrier Layer Prepar…
2009
Subnanometer-thick Al2O3 barrier layers on nanocrystalline TiO2 film were prepared with atomic layer deposition (ALD). The method allowed variation of barrier thicknesses at atomic resolution also deep in nanoporous structures, which makes it a superior method as compared to, e.g., sol−gel techniques. In this letter we present results on the effect of Al2O3 barriers of various thicknesses on forward electron injection in dye-sensitized solar cells. A decrease in the amplitude of the oxidized Ru(dcbpy)2(NCS)2 dye absorption signal due to singlet injection was observed already after one deposition cycle that produces a discontinuous layer with nominal thickness of 1 A. More than two layer coa…
Nanoporous Thin Films Based on Polylactide-Grafted Norbornene Copolymers
2008
Thermally stable vinyl polymerized polynorbornene (PNB) is one of the challenging materials in porous low dielectric films for packaging applications. Nanoporous PNB thin films were obtained with poly(d,l-lactide) (PLA)-grafted norbornene copolymers. Thermally labile PLA chains act as pore generators in PNB films. Thermally stable PNB main chains were synthesized by Pd-catalyzed vinyl polymerization and PLA side chains were grafted onto the PNB main chains by ring opening polymerization. The brittle and poor processible properties of PNB could easily be controlled by the copolymerization with norbornene derivatives. In thin films, the PLA chains were found to thermally decompose at about 25…
Multilayer modified NH<inf>4</inf>NO<inf>3</inf> granules with 3D nanoporous structure: Effect of the heat treatment regime o…
2017
The article is devoted to the investigation of the structure of macro- and mesopores on the surface and inside of modified NH4NO3 granules. The main quality indicators of modified NH4NO3 granules are presented and the relationship between the nanoporous structure of granules and the quality indicators is shown. Various thermodynamic conditions for obtaining a nanoporous structure of the surface and internal layers during the modification of granules are considered. The optimal regime for the uniformity of the temperature distribution in the vortex granulator is the regime of mixed motion of the drying agent. In this mode, mainly “modification” pores are formed, “mechanical” pores due to the…
Highly Ordered Nanoporous Thin Films from Photocleavable Block Copolymers
2011
Poly(styrene-block-ethylene oxide) with an o-nitrobenzyl ester photocleavable junction (PS-hν-PEO) was synthesized by a combined RAFT polymerization and “click chemistry“ approach and represents the first report utilizing this method for the synthesis of photocleavable block copolymers. After solvent annealing, highly ordered thin films were prepared from PS-hν-PEO. Following a very mild UV exposure and successive washing with water, PS-hν-PEO thin films were transformed into highly ordered nanoporous thin PS films with pore diameters of 15–20 nm and long range ordering (over 2 μm × 2 μm). Afterwards the pores were filled with PDMS by spin-coating in combination with capillary forces. After…
Capillary Imbibition, Crystallization, and Local Dynamics of Hyperbranched Poly(ethylene oxide) Confined to Nanoporous Alumina
2017
The crystallization and dynamics of hyperbranched poly(ethylene oxide) (hbPEO), obtained from the direct random copolymerization of EO and glycidol (PEO-co-PG), are studied both in bulk and within nanoporous alumina (AAO). Copolymerization decreases the degree of crystallinity and lowers the crystallization and melting temperatures as compared to linear PEO. The dynamics of capillary imbibition within AAO followed the t1/2 prediction but is slower than predicted by the classical Lucas–Washburn equation. The most prominent effect of confinement is the change in nucleation mechanism—from heterogeneous nucleation in bulk to homogeneous nucleation inside AAO. The homogeneous nucleation temperat…
Nanoconfined mixed Li and Mg borohydrides as materials for solid state hydrogen storage
2012
Abstract Several mixtures of LiBH4 and Mg(BH4)2 borohydrides in different stoichiometric ratios (1:0, 2:1, 1:1, 1:2, 0:1), prepared by high energy ball milling, have been investigated with X-ray powder diffraction and thermal programmed desorption (TPD) volumetric analysis to test the dehydrogenation kinetics in correlation with the physical mixture composition. Afterwards mixed and unmixed borohydrides were dispersed on high specific surface area ball milled graphite by means of the solvent infiltration technique. BET and statistical thickness methods were used to characterize the support surface properties, and SEM micrographs gave a better understanding of the preparation techniques. It …
Synthesis and characterization of carbon coated sponge-like tin oxide (SnOx) films and their application as electrode materials in lithium-ion batter…
2016
Nanoporous metal oxides are widely used for the development of various functional nanostructures. We report on the synthesis of sponge-like tin oxide films on copper foil by anodization of electrochemically deposited tin films. The thin films are functionalized using a surface-anchoring carbon precursor-polymer (poly(acrylonitrile-b-dopamine acrylamide)) followed by annealing at elevated temperature to convert the polymer coating into a carbonaceous coating. The as prepared and the carbon coated films are characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and Raman spectroscopy. Subsequently, both SnOx films are employed as a…
Design of siliceous lignins – Novel organic/inorganic hybrid sorbent materials
2009
Novel nanoporous lignin(lignocellulose)/SiO2 hybrid materials were designed using the sol–gel process. X-ray photoelectronic spectroscopy, Fourier transform infrared spectroscopy and 29Si and 13C nuclear magnetic resonance spectroscopy were applied to characterize the hybrids’ surface and bulk structure. Nitrogen and water vapor sorption were used for assessment of porous structure parameters and hydrophobization of matrices, respectively. The efficiency of the hybrid materials obtained was proved by adsorption tests with potential inorganic (Cu2+) and organic (2,4-dichlorophenoxyacetic acid) pollutants.