Search results for "Navier–Stokes equation"

showing 10 items of 37 documents

Implicit-explicit and explicit projection schemes for the unsteady incompressible Navier–Stokes equations using a high-order dG method

2017

Abstract A modified version of the projection scheme [19] is proposed, which does not show a lower limit for the time step in contrast to the limits of stability observed numerically for some projection type schemes. An advantage of the proposed scheme is that the right-hand side of the Poisson equation for the pressure is independent of the time step. An explicit version of the current scheme is also provided besides the implicit-explicit one. For the implicit-explicit version, we retain divergence of the viscous terms on the right-hand side of the Poisson equation in order to achieve a higher accuracy for low Reynolds number flows. In this way, we also ensure that the Poisson equation wit…

General Computer ScienceDiscretizationPlane (geometry)Mathematical analysisGeneral Engineering01 natural sciencesProjection (linear algebra)010305 fluids & plasmas010101 applied mathematicsIncompressible flow0103 physical sciencesNeumann boundary conditionBoundary value problem0101 mathematicsPoisson's equationNavier–Stokes equationsMathematicsComputers & Fluids
researchProduct

MAST-RT0 solution of the incompressible Navier–Stokes equations in 3D complex domains

2020

A new numerical methodology to solve the 3D Navier-Stokes equations for incompressible fluids within complex boundaries and unstructured body-fitted tetrahedral mesh is presented and validated with three literature and one real-case tests. We apply a fractional time step procedure where a predictor and a corrector problem are sequentially solved. The predictor step is solved applying the MAST (Marching in Space and Time) procedure, which explicitly handles the non-linear terms in the momentum equations, allowing numerical stability for Courant number greater than one. Correction steps are solved by a Mixed Hybrid Finite Elements discretization that assumes positive distances among tetrahedr…

General Computer Scienceeulerian methodMathematics::Analysis of PDEspredictor–corrector scheme02 engineering and technology01 natural sciencesnavier–stokes equationsSettore ICAR/01 - Idraulica010305 fluids & plasmasNumerical methodologyPhysics::Fluid Dynamics0203 mechanical engineeringNavier–Stokes equations 3D numerical model Eulerian method unstructured tetrahedral mesh predictor–corrector scheme Mixed Hybrid Finite elementIncompressible flow0103 physical sciencesNavier–Stokes equationsPhysicsMathematical analysisEulerian methodunstructured tetrahedral meshEngineering (General). Civil engineering (General)3d numerical modelTetrahedral meshes020303 mechanical engineering & transportsmixed hybrid finite elementModeling and SimulationCompressibilityTA1-2040Engineering Applications of Computational Fluid Mechanics
researchProduct

Unsteadiness and transition to turbulence in woven spacer filled channels for Membrane Distillation

2017

To characterize the performance of Membrane Distillation (MD) modules, channels filled with woven spacers were investigated by Computational Fluid Dynamics (including Direct Numerical Simulations and the use of the SST k-ω turbulence model) and by parallel experiments with Thermochromic Liquid Crystals. The cases considered here regard mutually orthogonal filaments with a spacer pitch to channel height ratio P/H=2, two spacer orientations θ with respect to the main flow (0° and 45°), and bulk Reynolds numbers Re from ∼200 to ∼2000, an interval of great interest in practical MD applications. For both values of θ, CFD predicted steady-state flow for Re up to ∼300, and chaotic flow …

HistoryFlow (psychology)Thermodynamics02 engineering and technologyComputational fluid dynamicsEducationPhysics::Fluid Dynamicssymbols.namesake020401 chemical engineeringLiquid crystal0204 chemical engineeringbusiness.industryTurbulenceChemistryOscillationSpacer-filled channels CFD membrane distillation turbulence RANS DNSReynolds numberMechanics021001 nanoscience & nanotechnologyComputer Science ApplicationsHeat transfersymbols0210 nano-technologyReynolds-averaged Navier–Stokes equationsbusiness
researchProduct

Long time behavior for a dissipative shallow water model

2013

We consider the two-dimensional shallow water model derived by Levermore and Sammartino (Nonlinearity 14,2001), describing the motion of an incompressible fluid, confined in a shallow basin, with varying bottom topography. We construct the approximate inertial manifolds for the associated dynamical system and estimate its order. Finally, considering the whole domain R^2 and under suitable conditions on the time dependent forcing term, we prove the L^2 asymptotic decay of the weak solutions.

Inertial frame of referenceFourier splitting methodDynamical Systems (math.DS)Space (mathematics)Dynamical system01 natural sciencesPhysics::Fluid DynamicsNavier–Stokes equationsMathematics - Analysis of PDEsAttractorFOS: MathematicsMathematics - Dynamical Systems0101 mathematicsNavier–Stokes equationsPhysics::Atmospheric and Oceanic PhysicsMathematical PhysicsMathematicsApplied Mathematics010102 general mathematicsMathematical analysisAttractorIncompressible viscous fluidInertial manifoldFunctional Analysis (math.FA)Mathematics - Functional Analysis010101 applied mathematicsWaves and shallow waterTime decayDissipative systemCompressibilityAnalysisAnalysis of PDEs (math.AP)Annales de l'Institut Henri Poincaré C, Analyse non linéaire
researchProduct

Navier-Stokes equations on an exterior circular domain: construction of the solution and the zero viscosity limit

1997

Abstract In this Note, we consider the limit of Navier-Stokes equations on a circular domain. By an explicit construction of the solution, it is proved that, when viscosity goes to zero, solution converges to the Euler solution outside the boundary layer and to the Prandtl solution inside the boundary layer.

Mathematical analysisPrandtl numberGeneral MedicineDomain (mathematical analysis)Euler equationsPhysics::Fluid Dynamicssymbols.namesakeBoundary layerViscosityEuler's formulasymbolsLimit (mathematics)Navier–Stokes equationsMathematicsComptes Rendus de l'Académie des Sciences - Series I - Mathematics
researchProduct

A stabilized finite element method for particulate two-phase flow equations laminar isothermal flow

1997

A finite element method for the solution of particulate two-phase flows is presented. The governing system has the form of compressible Navier-Stokes equations with unknown pressure. Therefore, the proposed method must capture the main features of stabilized methods used for incompressible as well as for compressible Navier-Stokes equations. Solution of the resulting nonlinear algebraic system of equations is based on the linearization using Newton method in conjunction with Generalized Minimal Residual iterative solver and Incomplete LU preconditioning. The method has been tested for three test cases including venturi tube flow, flow over backward step and mixing of flows in t-junction.

Mechanical EngineeringIsothermal flowComputational MechanicsGeneral Physics and AstronomyLaminar flowMechanicsCompressible flowFinite element methodComputer Science ApplicationsEuler equationsPhysics::Fluid Dynamicssymbols.namesakeClassical mechanicsMechanics of MaterialsPressure-correction methodsymbolsNavier–Stokes equationsMathematicsExtended finite element methodComputer Methods in Applied Mechanics and Engineering
researchProduct

A parallel splitting up method and its application to Navier-Stokes equations

1991

A parallel splitting-up method (or the so called alternating-direction method) is proposed in this paper. The method not only reduces the original linear and nonlinear problems into a series of one dimensional linear problems, but also enables us to compute all these one dimensional linear problems by parallel processors. Applications of the method to linear parabolic problem, steady state and nonsteady state Navier-Stokes problems are given. peerReviewed

Nonlinear systemAlternating direction implicit methodSteady stateSeries (mathematics)business.industryApplied MathematicsMathematical analysisParabolic problemComputational fluid dynamicsNavier–Stokes equationsbusinessFinite element methodMathematicsApplied Mathematics Letters
researchProduct

Computational and experimental studies of the flow field near the beam entrance window of a liquid metal target

2014

Abstract After the first world liquid metal target has been successfully operated at the SINQ facility at the Paul Scherrer Institut (PSI) for 6 months. The idea of having a reliable target with a bypass flow for cooling the beam entrance window, but with the bypass flow not driven by a separate pump, was examined within the project called LIMETS (Liquid Metal Target for SINQ). In designing of liquid metal targets, turbulence modelling is of high importance due to lack in methods for measuring the spatial distribution of flow and turbulence characteristics. In this study, validation of different turbulence models were performed in water model with hemispherical geometry using particle image…

Nuclear and High Energy PhysicsEngineeringLiquid metalbusiness.industryTurbulenceWater flowK-epsilon turbulence modelMechanical EngineeringMechanicsPhysics::Fluid DynamicsOpticsNuclear Energy and EngineeringParticle image velocimetryTurbulence kinetic energyGeneral Materials ScienceSafety Risk Reliability and QualitybusinessReynolds-averaged Navier–Stokes equationsWaste Management and DisposalLarge eddy simulationNuclear Engineering and Design
researchProduct

Comparison between adaptive and uniform discontinuous Galerkin simulations in dry 2D bubble experiments

2013

Accepted by the Journal of Computational Physics Adaptive mesh refinement generally aims to increase computational efficiency without compromising the accuracy of the numerical solution. However it is an open question in which regions the spatial resolution can actually be coarsened without affecting the accuracy of the result. This question is investigated for a specific example of dry atmospheric convection, namely the simulation of warm air bubbles. For this purpose a novel numerical model is developed that is tailored towards this specific application. The compressible Euler equations are solved with a Discontinuous Galerkin method. Time integration is done with an IMEXmethod and the dy…

Numerical AnalysisMathematical optimizationPhysics and Astronomy (miscellaneous)Mathematical modelAdaptive mesh refinementApplied MathematicsNumerical analysisAdaptive Mesh RefinementCompressible flowComputer Science ApplicationsEuler equationsDry Warm Air BubbleComputational Mathematicssymbols.namesakeMeteorologyIMEXDiscontinuous Galerkin methodModeling and SimulationDiscontinuous GalerkinsymbolsApplied mathematicsGalerkin methodNavier–Stokes equationsMathematicsJournal of Computational Physics
researchProduct

Existence and uniqueness for the Prandtl equations

2001

International audience; Under the hypothesis of analyticity of the data with respect to the tangential variable we prove the existence and uniqueness of the mild solution of Prandtl boundary layer equation. This can be considered an improvement of the results of [8] as we do not require analyticity with respect to the normal variable. (C) 2001 Academie des sciences/Editions scientifiques et medicales Elsevier SAS.

Partial differential equation010102 general mathematicsPrandtl numberMathematical analysisGeneral Medicine01 natural sciencesEuler equations010101 applied mathematicssymbols.namesakeBoundary layer[MATH.MATH-MP]Mathematics [math]/Mathematical Physics [math-ph]symbolsUniqueness0101 mathematicsConvection–diffusion equationNavier–Stokes equationsVariable (mathematics)Mathematics
researchProduct