Search results for "Neri"
showing 10 items of 1617 documents
Are there so many congeneric species of chironomid larvae in a small stream?
2018
The co-occurrence of larvae of congeneric chironomid species is common in natural stream assemblages, and raises the problem of finding mechanisms to explain the co-existence of species with similar ecological requirements. In this contribution, we explored the co-occurrence of chironomid larvae belonging to congeneric species within four genera of chironomids: Cricotopus, Eukiefferiella, Orthocladius and Rheocricotopus (with 2, 7, 2 and 4 species, respectively) in the headwaters of a small Mediterranean calcareous stream. Due to the intrinsic, natural spatial and temporal variability in these habitats, we studied three different sites at two different seasons within the annual hydrological…
Intermittent Aeration in a Hybrid Moving Bed Biofilm Reactor for Carbon and Nutrient Biological Removal
2020
The paper presents an experimental study on a lab scale hybrid moving bed biofilm reactor with intermittent aeration. Specifically, a comparison between two different operating conditions was analyzed: continuous and intermittent aeration. Both continuous and intermittent aeration were monitored and compared in order to get the best operational conditions. The intermittent aeration campaign was sub-divided in three phases with different duration of alternation of aerobic and anoxic times and organic and nitrogen loading rates. The efficiency of N-removal improved by 70% during the intermittent aeration. The best condition was observed with 40 min of aeration and 20 min of no-aeration, an or…
Improved Propagation and Growing Techniques for Oleander Nursery Production
2019
In the first trial, we examined rooting of stem cuttings in relation to number of nodes and indole-3-butyric acid (IBA) treatment in several Nerium oleander clones grown in Sicily. In a second trial, we tested the effect of different forcing dates and shading on oleander plants for gardens and natural landscapes. Three- and four-node cuttings, ranging in length from 10 to 14 cm, were significantly superior to two-node cuttings (8&ndash
A validity and reliability study of Conditional Entropy Measures of Pulse Rate Variability
2019
In this work, we present the feasibility to use a simpler methodological approach for the assessment of the short-term complexity of Heart Rate Variability (HRV). Specifically, we propose to exploit Pulse Rate Variability (PRV) recorded through photoplethysmography in place of HRV measured from the ECG, and to compute complexity via a linear Gaussian approximation in place of the standard model-free methods (e.g., nearest neighbor entropy estimates) usually applied to HRV. Linear PRV-based and model-free HRV-based complexity measures were compared via statistical tests, correlation analysis and Bland-Altman plots, demonstrating an overall good agreement. These results support the applicabil…
A comprehensive comparison between halophilic granular and flocculent sludge in withstanding short and long-term salinity fluctuations
2018
The effects of salinity fluctuations on the activity of autochthonous halophilic bacteria in aerobic granular sludge (AGS) and flocculent activated sludge (FAS) reactors were investigated. The response of nitrifiers and denitrifiers activity to drastic and moderate salinity shocks in the short-term (ST) and long-term (LT) was examined. The BOD5removal efficiency decreased only in the reactors subjected to the drastic LT salinity increase. Nevertheless, stable performances were achieved 18 days after the shock in the AGS-R1 (90%), whereas after 27 days in the FAS-R1 (82%). The loss in nitritation efficiency was higher in the FAS reactors and was proportional to the shock intensity. Nitritati…
Waste activated sludge dewaterability: comparative evaluation of sludge derived from CAS and MBR systems
2016
Nowadays, sludge dewatering is one of the greatest operational cost to wastewater treatment cycle. Specifically, 1t of fresh sludge to be disposed is composed, on average, by 0.25 - 0.30t of suspended solids, with an average cost for treatment and disposal around 280 - 470 €/t of suspended solids. Despite several technologies have been developed with the focus to reduce also the specific sludge production, still mechanical dewatering represents a crucial step to limit the amount of sludge to be disposed. Many physical–chemical parameters influence the sludge dewaterability: floc structure, particle size, bound water content, surface charge and hydrophobicity, Extracellular Polymeric Substan…
The role of extracellular polymeric substances on aerobic granulation with stepwise increase of salinity
2018
Abstract A granular sequencing batch reactor (GSBR) worked for 164 days to study the effect of salinity on aerobic granulation. The feeding had an organic loading rate (OLR) of 1.6 kg COD⋅m −3 ⋅d −1 and a gradual increase of salinity (from 0.30 to 38 g NaCl − ⋅L −1 ) to promote a biological salt-adaptation. First aggregates (average diameter ≈ 0.4 mm) appeared after 14 days. Extracellular polymeric substances (EPSs) analyses revealed that proteins were mainly higher than polysaccharides, and microorganisms metabolized EPSs as additional carbon source, mostly in feast phase, to face the energy demand for salinity adaptation. No significant worsening of organic matter removal was observed. Th…
Generative Design for Additively Manufactured Textiles in Orthopaedic Applications
2021
AbstractThe aim of this work is to implement a new process for the design and production of orthopaedic devices to realize entirely by Additive Manufacturing (AM). In particular, a generative algorithm for parametric modelling of flexible structures to use in orthopaedic devices has been developed. The developed modelling algorithm has been applied to a case study based on the design and production of a customized elbow orthosis made by Selective Laser Sintering. The results obtained have demonstrated that the developed algorithm overcomes many drawbacks typical of traditional CAD modelling approaches. FEM simulations have been also performed to validate the design of the orthosis. The new …
Industry 4.0: smart test bench for shipbuilding industry
2020
AbstractIndustry 4.0 promises to increase the efficiency of production plants and the quality of the final product. Consequently, companies that implement advanced solutions in production systems will have a competitive advantage in the future. The principles of Industry 4.0 can also be applied to shipyards to transform them into “smart shipyards” (Shipyard 4.0). The aim of this research is to implement an interactive approach by Internet of Things on a closed power-loop test bench equipped with sophisticated sensors that is specifically designed to test high-power thrusters before they are installed on high-speed crafts, which are used in passenger transport. The preliminary results of the…
Advances on mechanics, design engineering and manufacturing
2018
The theme of the present editorial is dedicated to the“Advances on Mechanics, Design Engineering and Manufac-turing” that emerge in different engineering and architecturalfields.The theme has been chosen as leitmotiv of a series ofevents that have been organized by three societies operatingin Italy, Spain and France, respectively: ADM (Associ-azione nazionale Disegno e Metodi dell’ingegneria indus-triale), INGEGRAF (Asociación Española de IngenieríaGráfica and AIP-PRIMECA (Ateliers Inter-établissementsde Productique—Pôles de Resources Informatiques pour laMECAnique). Since 2014, a series of JCM conferences havebeen organized. JCM is the acronym of “Joint Conference onMechanics, Design Engin…