Search results for "Note"

showing 10 items of 10709 documents

Amorphous Silicon Nanotubes via Galvanic Displacement Deposition

2013

Amorphous silicon nanotubes were grown in a single step into a polycarbonate membrane by a galvanic displacement reaction conducted in aqueous solution. In order to optimize the process, a specifically designed galvanic cell was used. SEM images, after polycarbonate dissolution, showed interconnected nanotube bundles with an average length of 18 μm and wall thickness of 38 nm.The deposited silicon was revealed by EDS analysis, whilst X-ray diffraction and Raman spectroscopy showed that nanotubes have an amorphous structure. Silicon nanotubes were also characterized by photo-electrochemical measurements that showed n-type conductivity and optical gap of ~1.6 eV. Keywords: Silicon nanotubes, …

Amorphous siliconSilicon nanotubes dispalcement deposition nanostructures lithium batteries solar cellsNanotubeMaterials scienceSiliconNanocrystalline siliconchemistry.chemical_elementNanotechnologyAmorphous solidlcsh:Chemistrysymbols.namesakechemistry.chemical_compoundSettore ING-IND/23 - Chimica Fisica Applicatalcsh:Industrial electrochemistrylcsh:QD1-999chemistryvisual_artElectrochemistrysymbolsvisual_art.visual_art_mediumGalvanic cellPolycarbonateComposite materialRaman spectroscopylcsh:TP250-261
researchProduct

Microspectroscopy on single domains of phase-separated monolayers

1989

SUMMARY A versatile and inexpensive, but fully equipped apparatus is presented, which enables detailed optical studies on amphiphilic molecules at the liquid-gas interface. Structural and spectroscopic information, particularly in small areas of single domains of phase-separated monolayers, can be achieved by combination of this miniaturized Langmuir trough and spectralphotometer microscope. The potential of this apparatus is demonstrated with some measurements on a diyne-substituted polymerizable lipid analogue at the air-water interface.

Amphiphilic moleculeHistologyMicroscopelawChemistryPhase (matter)Langmuir troughMonolayerNanotechnologyPathology and Forensic Medicinelaw.inventionJournal of Microscopy
researchProduct

How self-assembly of amphiphilic molecules can generate complexity in the nanoscale

2015

Abstract Given the importance of nanomaterials and nanostructures in modern technology, in the past decades much effort has been directed to set up efficient bottom up protocols for the piloted self-assembly of molecules. However, molecules are generally disinclined to adopt the desired structural organization because they behave according to their own specific intermolecular interactions. Thus, only some selected classes of chemical compounds are capable to lead to useful self-assembled structures. Amphiphiles, simultaneously possessing polar and apolar moieties within their molecular architecture, can give a wide scenario of possible intermolecular interactions: polar–polar, polar–apolar,…

Amphiphilic moleculeNanostructureStructural organizationChemistryNanomachinesNanotechnologyTop-down and bottom-up designLiving cellComplexitySelf-assemblyNanodevicesNanomachinesSelf-assemblyComplexityNanotechnologyColloid and Surface ChemistryNanotechnologySelf-assemblyNanodevices
researchProduct

Optical Studies of Amphiphilic Molecules with Interesting Electro-Optical and Non-Linear Optical Properties

1990

Structural control is a major issue in both life science, investigating the function of the biological machinery, and in materials science, aiming at the design of novel devices. In part one, recent electro-optical investigations of the primary event of photosynthesis on purified protein preparations are described. Part two focuses on structural studies of monolayers at an air/water interface, and of Langmuir-Blodgett multilayers from a new molecule designed for nonlinear optical applications.

Amphiphilic moleculeNonlinear systemNonlinear opticalMaterials scienceMonolayerMoleculeNanotechnologyPrimary event
researchProduct

Monolayers of Amphiphilic Molecules

1992

There are good reasons why the organizers have placed this lecture at the beginning of a conference on the multip1e aspects of membranes. In many respects the monolayer may be considered half of a membrane and it obviously is the most simple and best-defined model system. Yet we will show that the system is more complex than many have anticipated. On the other hand, there are many general features which can be discussed without looking into chemical details.

Amphiphilic moleculechemistry.chemical_compoundMembraneMaterials sciencechemistryMonolayerModel systemNanotechnologyBehenic acid
researchProduct

Solution processable piperazine and triphenyl moiety containing non-symmetric bis-styryl-DWK type molecular glasses with light-emitting and amplified…

2018

A series of 2,6-bis-styryl-4H-pyran-4-ylidene fragment containing glassy organic compounds with chemically stable bonding of amorphous phase promoting bulky triphenyl moieties through piperazine structural fragment (DWK-T dyes) in a form of 2-(5,5,5-triphenylpentyl)piperazin-1-yl)styryl)-substituent have been synthesized and investigated as the potential gain medium component for organic solid state laser applications. Physical properties of the dyes vary and are mostly depending from the other styryl-substituent attached to the 4H-pyran-4-ylidene backbone fragment in 6-position. Thermal stability of synthesized dyes is above 312°C with the glass transitions from 97°C to 109°C. Obtained nea…

Amplified spontaneous emissionActive laser mediumDye laserPhotoluminescenceMaterials science02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistry01 natural sciences0104 chemical sciencesPiperazinechemistry.chemical_compoundchemistryCovalent bondMoietyThermal stability0210 nano-technologyOrganic Light Emitting Materials and Devices XXII
researchProduct

Glass-forming derivatives of 2-cyano-2-(4H-pyran-4-ylidene) acetate for light-amplification systems

2019

Abstract A series of 2-cyano-2-(4H-pyran-4-ylidene) acetate derivatives with triphenyl and 9H-carbazole moieties were synthesized and investigated, mostly for potential applications in organic solid state lasers. Synthesized compounds show remarkable amorphous film formation ability, tunable thermal properties (thermal stability varies from 190 °C to 387 °C and glass transition temperature from 94 °C up to 141 °C) with light absorption from 400 nm to 600 nm and photoluminescence from 600 nm up to 800 nm. Dyes with incorporated mono-styryl- electron donating fragment (KTB, KTBC and KTB3K) showed higher photoluminescence quantum yield (PLQY) (from 16% up to 23%), significantly lower amplified…

Amplified spontaneous emissionDye laserPhotoluminescenceMaterials scienceProcess Chemistry and TechnologyGeneral Chemical EngineeringQuantum yield02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistryLaser01 natural sciences0104 chemical sciencesAmorphous solidlaw.inventionlawThermal stability0210 nano-technologyGlass transitionDyes and Pigments
researchProduct

Amplified spontaneous emission of pyranyliden derivatives in PVK matrix

2016

One of the well-known red light emitting laser dyes is 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4Hpyran ( DCM ). Amplified spontaneous emission (ASE) has been widely investigated of DCM molecules or its derivatives in polymer or low molecular weight matrix. The main issue for these molecules is aggregation which limits doping concentration in matrix. Lowest ASE threshold values within concentration range of 2 and 4 wt% were obtained. In this work ASE properties of two original DCM derivatives in poly(N-vinylcarbazole) ( PVK ) at various concentrations will be discussed. One of the derivatives is the same DCM dye with replaced butyl groups at electron donor part with bulky try…

Amplified spontaneous emissionDye laserPhotoluminescencebusiness.industryChemistrySolvationQuantum yieldElectron donor02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistryThreshold energy01 natural sciences0104 chemical scienceschemistry.chemical_compoundOptoelectronics0210 nano-technologyLuminescencebusinessSPIE Proceedings
researchProduct

Amplified Spontaneous Emission Properties of Solution Processed CsPbBr3 Perovskite Thin Films

2017

Metal halide perovskites are currently emerging as highly promising optoelectronic materials. It has been recently demonstrated that fully inorganic solution processed CsPbBr3 perovskite thin films show good electroluminescence properties combined with high thermal stability. In this work, we investigate in details the amplified spontaneous emission (ASE) properties of CsPbBr3 perovskite thin films, as a function of the temperature and the trap density, modified by changing the CsBr-PbBr2 precursor concentration. ASE is observed in samples from both CsBr-rich solution (low trap density) and equimolar solution (higher trap density), up to about 150 K, with a minimum threshold of 26 and 29 mu…

Amplified spontaneous emissionMaterials scienceExcitonAnalytical chemistryHalide02 engineering and technologyPerovskites Amplified Spontaneous EmissionElectroluminescence010402 general chemistry021001 nanoscience & nanotechnology01 natural sciences0104 chemical sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsMetalGeneral Energyvisual_artvisual_art.visual_art_mediumThermal stabilityPhysical and Theoretical ChemistryThin film0210 nano-technologyPerovskite (structure)The Journal of Physical Chemistry C
researchProduct

Mechanisms of Spontaneous and Amplified Spontaneous Emission in CH3NH3PbI3 Perovskite Thin Films Integrated in an Optical Waveguide

2020

In this paper, the physical mechanisms responsible for optical gain in ${\mathrm{CH}}_{3}{\mathrm{NH}}_{3}{\mathrm{Pb}\mathrm{I}}_{3}$ (MAPI) polycrystalline thin films are investigated experimentally and theoretically. Waveguide structures composed by a MAPI film embedded in between PMMA and silica layers are used as an efficient geometry to confine emitted light in MAPI films and minimize the energy threshold for amplified spontaneous emission (ASE). We show that photogenerated exciton density at the ASE threshold is as low as $(2.4\ensuremath{-}12)\ifmmode\times\else\texttimes\fi{}{10}^{16}\phantom{\rule{0.1em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}3}$, which is below the Mott transition den…

Amplified spontaneous emissionMaterials scienceExcitonPhysics::OpticsGeneral Physics and Astronomy02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesMolecular physicsWaveguide (optics)Mott transitionCondensed Matter::Materials Science0103 physical sciencesSpontaneous emissionThin film010306 general physics0210 nano-technologyEnergy (signal processing)Perovskite (structure)Physical Review Applied
researchProduct