Search results for "Note"
showing 10 items of 10709 documents
Analytical Solution of the 4ENF Test with Interlaminar Frictional Effects and Evaluation of Mode II Delamination Toughness
2018
The present paper proposes an analytical solution of the four points bend end-notched flexure test (4ENF) with frictional contact between the delamination surfaces. The analytical solution was developed in the framework of the classic Euler-Bernoulli bending beam theory with orthotropic linear elastic constitutive behavior. The frictional contact was modeled as rigid-perfectly plastic with the Mohr-Coulomb activation function and the nonassociative flow rule. The elastic solution of the partially cracked beam subjected to the four points bending test with frictional contact was developed, and the Mode II delamination toughness was analytically determined by means of the Griffith approach, a…
Recyclable and Light-Adaptive Vitrimer-Based Nacre-Mimetic Nanocomposites.
2021
Nacre's natural design consists of a perfect hierarchical assembly that resembles a brick-and-mortar structure with synergistic stiffness and toughness. The field of bioinspired materials often provides attractive architecture and engineering pathways which allow to explore outstanding property areas. However, the study of nacre-mimetic materials should not be limited to the design of its architecture but ought to include the understanding, operation, and improvement of internal interactions between their components. Here, we introduce a vitrimer prepolymer system that, once integrated into the nacre-mimetic nanocomposites, cures and cross-links with the presence of Lewis acid catalyst and …
Anionic Copolymerization Enables the Scalable Synthesis of Alternating (AB)n Multiblock Copolymers with High Molecular Weight in n/2 Steps
2018
Based on the highly disparate reactivities of isoprene (I, rI = 25.4) and 4-methylstyrene (4MS, r4MS = 0.007) in the anionic copolymerization in nonpolar media, a general strategy for the rapid and scalable synthesis of tapered multiblock copolymers with an extremely steep gradient has been developed. A repetitive addition strategy of a mixture of isoprene and 4MS leads to a tapered diblock in each case, giving access to linear alternating multiblock copolymers of the (AB)n type with up to 10 blocks. All multiblock copolymers showed narrow molecular weight distributions (dispersity Đ = 1.04–1.12). High molecular weights in the range of 80 to 400 kg mol–1 were achieved. Due to the incompatib…
Tapered Multiblock Star Copolymers: Synthesis, Selective Hydrogenation, and Properties
2020
Two series of well-defined multiblock four-arm tapered star copolymers with “arms” of the type poly(styrene)-block-poly(isoprene-grad-styrene), (SI/S)₄, were synthesized on a multigram scale with short reaction times. Targeted molecular weight (M) values ranged from 80 to 240 kg mol–¹ with polystyrene (PS) compositions of 40 and 60 wt %. Narrowly distributed (Đ = 1.04–1.12) copolymers were obtained regardless of M and without additional purification beyond precipitation. At sufficiently high M, members of the 40 wt % PS series possessed either a cylindrical or bicontinuous morphology, whereas the 60 wt % PS series yielded lamellae. The star copolymers outperformed their corresponding linear…
Synergistic effects of Janus particles and triblock terpolymers on toughness of immiscible polymer blends
2017
Abstract By influencing both the interfacial adhesion and the morphology, compatibilizers determine the mechanical properties of polymer blends. Here, we study the mechanical properties, in particular the fatigue crack propagation (FCP) of immiscible blends of poly(2,6-dimethyl-1,4-phenylene ether)/poly(styrene- co -acrylonitrile) (PPE/SAN), compatibilized with Janus nanoparticles (JPs) and linear polystyrene- block -polybutadiene- block -poly(methyl methacrylate) (SBM) triblock terpolymers. Synergistic effects of a mixture of both compatibilizers improve the FCP behavior and reveal the important role of interface stiffness and flexibility on the mechanical properties of polymer blends. The…
Effects of fiber orientation of adjacent plies on the mode I crack propagation in a carbon-epoxy laminates
2011
Abstract The influence of ply orientation on the resistance to mode I delamination of multidirectional composite laminates can be assessed by Double Cantilever Beam (DCB) tests. However, one of the difficulties associated with such a study is the change in overall elastic parameters occurring when modifying local ply orientations. The present work uses laminates with special stacking sequences allowing for isolating the orientation parameter. Multidirectional DCB specimens were designed so as to obtain an uncoupled quasi isotropic and quasi-homogeneous elastic behavior, with the same properties for the entire laminate and the two sub laminates separated by the pre crack at mid-plane. The re…
Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites
2018
International audience; Dense SiC-based nanostructured composites reinforced by well-distributed carbon nanotubes (CNTs) were elaborated for the first time by spark plasma sintering (SPS) without sintering additive. Microstructures of materials containing different amounts of CNTs – up to 8.0 vol% – were correlated with their mechanical, electrical and thermal properties. A continuous decrease of the SiC grain size was observed when the amount of CNT was increased, while the evolution of density showed a different behavior that could be explained by the particular combination of SPS technique with the electrical resistivity evolution of the green bodies. Optimal effect of CNTs addition on h…
Evaluation of toughness by finite fracture mechanics from crack onset strain of brittle coatings on polymers
2008
Crack onset strain measurements of a confined layer in tension provide the means for layer toughness estimation. The procedure can be simplified if steady-state conditions prevail starting from the commencement of crack propagation, an assumption frequently employed in energy release rate evaluation. It is demonstrated, by numerical analysis of experimental data, that an estimate of the defect size in the film is needed in order to reliably evaluate its fracture toughness from the crack onset strain. Only if microcracks of sufficient size are present in the brittle layer, the steady-state energy release rate at the crack onset strain can be identified with layer toughness. Otherwise, the to…
The Effect of Calcium on the Cohesive Strength and Flexural Properties of Low-Methoxyl Pectin Biopolymers.
2019
Abstract: Pectin binds the mesothelial glycocalyx of visceral organs, suggesting its potential role as a mesothelial sealant. To assess the mechanical properties of pectin films, we compared pectin films with a less than 50% degree of methyl esterification (low-methoxyl pectin, LMP) to films with greater than 50% methyl esterification (high-methoxyl pectin, HMP). LMP and HMP polymers were prepared by step-wise dissolution and high-shear mixing. Both LMP and HMP films demonstrated a comparable clear appearance. Fracture mechanics demonstrated that the LMP films had a lower burst strength than HMP films at a variety of calcium concentrations and hydration states. The water content also influe…
A redox-sensitive nanofluidic diode based on nicotinamide-modified asymmetric nanopores
2017
[EN] We demonstrate a redox-sensitive nanofluidic diode whose ion rectification is modulated by the oxidation and reduction of chemical moieties incorporated on its surface. To achieve this goal, we have first synthesized the chemical compounds 1-(4-aminobutyl)-3-carbamoylpyridin-1-ium (Nic-BuNH2) and 3-carbamoyl-1-(2,4-dinitrophenyl)pyridinium (Nic-DNP). Then, the surface of track-etched single asymmetric nanopores is decorated with the redox-sensitive Nic-BuNH2 and Nic-DNP molecules using carbodiimide coupling chemistry and Zincke reaction, respectively. The success of the modification reactions is monitored through the changes in the current¿voltage (I¿V) curves prior to and after pore f…