Search results for "Nuclear engineering"
showing 10 items of 533 documents
Static Deflection Compensation of Multi-Link Flexible Manipulators Under Gravity
2022
The static deflection compensation method of a planar multi-link flexible manipulator is proposed using the feedback from inertial sensors mounted at the tip of each link. The proposed compensation technique is validated experimentally using a high-precision laser tracker. The proposed strategy is experimentally verified using a three-link flexible manipulator. A strategy to compensate for the centripetal and tangential acceleration induced on the accelerometer mounted on the rotating link is proposed for correct inclination estimation. The improvement in the inclination estimation using the proposed compensation technique is verified both in simulation and experimental studies.
Draining and drying process development of the Tokamak Cooling Water System of ITER
2016
Abstract The ITER Organization (IO) developed a thermal-hydraulic (TH) model of the complex first wall and blanket (FW/BLK) cooling channels to determine gas flow rate and pressure required to effectively blow out the water in the FW/BLK. In addition, US ITER conducted experiments for selected geometries of FW/BLK flow channels to predict the blowout parameters. The analysis indicates that as low as 2 MPa of pressure difference over the blanket modules will ensure substantial evacuation of the water in blankets with just a few percent remaining in the blanket flow channels. A limited validation study indicates that the analysis yields less conservative results to compare against data collec…
A Spatial Pyramidal Decomposition Method for ear representation using local dual cross patterns
2019
International audience; In recent years, several scientific works are oriented to develop optimal ear representation, for ear recognition, which is discriminant, compact, and easyto-implement to ensure the best performance in terms of accuracy, computation cost, and storage requirement. In this manner, this paper presents a novel ear representation based on texture analysis framework, which relies mainly on Dual Cross Pattern (DCP) descriptor and Spatial Pyramid Histogram (SPH) method. The features are extracted using DCP descriptor to capture the textural structure then, the SPH of horizontal ear decomposition is applied to obtain the local information. The feature vector representations o…
Optimization of the first wall for the DEMO water cooled lithium lead blanket
2015
The maximum heat load capacity of a DEMO First Wall (FW) of reasonable cost may impact the decision of the implementation of limiters in DEMO. An estimate of the engineering limit of the FW heat load capacity is an essential input for this decision. This paper describes the work performed to optimize the FW of the Water Cooled Lithium-Lead (WCLL) blanket concept for DEMO fusion reactor in order to increase its maximum heat load capacity. The optimization is based on the use of water at typical Pressurised Water Reactors conditions as coolant. The present WCLL FW with a waved plasma-faced surface and with circular channels was studied and the heat load limit has been predicted with FEM analy…
Modelling heat transfer-controlled cooling and freezing times: a comparison between computational values and experimental results
2013
Modelling of heat transfer-controlled cooling and freezing time predictions are very important for a good preservation of foodstuffs. In that regard, we used a computer code based on the finite-element method that allowed us to analyse the phase-change of various foodstuffs during their freezing. The model was exercised to predict process times. The results can be used to design high efficiency plants. In this work, the results predicted by the FEM program are compared with the experimental values given in technical literature.
Experimental characterization of a novel configuration of thermoelectric refrigerator with integrated finned heat pipes
2021
Abstract Thermoelectric refrigerating systems (TER) are environment-friendly technologies. They have several advantages such as low maintenance costs, are less cumbersome and long lifetime. However, these systems have low coefficient of performance and are limited in achieving low temperature levels. This study investigates a new configuration of TE refrigerator employing a novel arrangement of heat sinks with integrated flat and finned heat pipes. A mathematical model is firstly developed to predict transient temperatures and cooling limit time. An experimental characterization is then performed and it includes optimization of energy consumption, cooling time, temperature levels and TE ref…
Electrical conductivity as a state indicator for the start-up period of anaerobic fixed-bed reactors.
2016
The aim of this work was to analyse the applicability of electrical conductivity sensors for on-line monitoring the start-up period of an anaerobic fixed-bed reactor. The evolution of bicarbonate concentration and methane production rate was analysed. Strong linear relationships between electrical conductivity and both bicarbonate concentration and methane production rate were observed. On-line estimations of the studied parameters were carried out in a new start-up period by applying simple linear regression models, which resulted in a good concordance between both observed and predicted values. Electrical conductivity sensors were therefore identified as an interesting method for monitori…
Thermal-hydraulic behaviour of the DEMO divertor plasma facing components cooling circuit
2017
Abstract Within the framework of the Work Package DIV 1 – “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by ENEA and University of Palermo to investigate the thermal-hydraulic performances of the DEMO divertor cassette cooling system. A comparative evaluation study has been performed considering three different options for the cooling circuit layout of the divertor Plasma Facing Components (PFCs). The potential improvement in the thermal-hydraulic performance of the cooling system, to be achieved by modifying cooling circuit layout, has been also assessed and discussed in terms of optimization strategy. The research acti…
The design of the DONES lithium target system
2019
Abstract In the framework of the EU fusion roadmap implementing activities, an accelerator-based Li(d,xn) neutron source called DONES (Demo-Oriented early NEutron Source) is being designed within the EUROfusion Work Package Early Neutron Source as an essential irradiation facility for testing candidate materials for DEMO reactor and future fusion power plants. DONES will employ a high speed liquid lithium jet struck by a 125 mA, 40 MeV deuteron beam to generate the intense neutron flux used to irradiate the material samples up to the desired level of displacement damage (˜10 dpa/fpy for iron in 0.3 l) and He production rates (˜10-13 appm He/dpa). In order to rapidly achieve a sound and stab…
Parametric study of the influence of First Wall cooling water on the Water Cooled Lithium Lead Breeding Blanket nuclear response
2019
Abstract In the framework of EUROfusion Work Package International Cooperation R&D activities, a close collaboration has been started among University of Palermo, ENEA Brasimone and ENEA Frascati for the development of the Water Cooled Lithium Lead (WCLL) Breeding Blanket (BB) concept. In this context, a research campaign has been carried out at the University of Palermo in order to investigate the influence of First Wall (FW) cooling water configuration on the nuclear response of the WCLL BB under irradiation in EU-DEMO, in order to gain useful indications for the WCLL BB pre-conceptual designs. To this end, three-dimensional nuclear analyses have been performed by MCNP5 v. 1.6 Monte Carlo…