Search results for "O2"
showing 10 items of 1115 documents
Structural and CO [sub] 2 capture properties of ethylenediamine-modified HKUST-1 metal-organic framework
2020
The high structural and compositional flexibility of metal–organic frameworks (MOFs) shows their great potential for CO2 capture and utilization in accordance with the environmental guidelines of low-carbon technology developments. HKUST-1 as one of the most intensively studied representatives of MOFs for such purposes excels because of its simplicity of production and high ability to tune its intrinsic properties by various functionalization processes. In the present work, ethylenediamine functionalization was performed for the first time in order to thoroughly investigate the amine sorption sites’ impact on the CO2 capture performance of HKUST-1. The placement of ethylenediamine moieties …
Photoelectrochemical characterization of Cu2O-nanowire arrays electrodeposited into anodic alumina membranes
2007
Perfectly aligned nanowire arrays of polycrystalline Cu2O were grown by template-pulsed electrodeposition from a cupric acetate-sodium acetate bath into anodic alumina membranes (AAM). The photoelectrochemical behavior of arrays with different nanowire lengths (0.5 mu m and 2 mu m) was investigated in neutral solution, and the results compared to those pertaining to Cu2O films grown with the same procedure. Although all samples displayed the same indirect bandgap (similar to 1.9 eV), differences were observed both in photocurrent intensity and sign. The latter changed with potential and wavelength in different ways for nanowires and films, revealing a different defect concentration in the t…
PBI mixed matrix hollow fiber membrane: Influence of ZIF-8 filler over H2/CO2 separation performance at high temperature and pressure
2020
High performance and commercially attractive mixed-matrix membranes were developed for H2/CO2 separation via a scalable hollow fiber spinning process. Thin (~300 nm) and defect-free selective layers were successfully created with a uniform distribution of the nanosized (~60 nm) zeolitic-imidazole framework (ZIF-8) filler within the polymer (polybenzimidazole, PBI) matrix. These membranes were able to operate at high temperature (150 °C) and pressure (up to 30 bar) process conditions required in treatment of pre-combustion and syngas process gas streams. Compared with neat PBI hollow fibers, filler incorporation into the polymer matrix leads to a strong increase in H2 permeance from 65 GPU t…
Electrochemical conversion of CO2 to formic acid using a Sn based electrode: A critical review on the state-of-the-art technologies and their potenti…
2021
Abstract The electrochemical conversion of carbon dioxide is considered one of the most promising strategies to convert waste-CO2 into value-added chemicals. This review focuses on the synthesis of formic acid/formate in aqueous electrolyte using Sn-based cathodes; this material is considered relatively cheap and shows promising results in terms of faradaic efficiency. In order to be suitable at an industrial scale, the process should present simultaneously high current densities, faradaic efficiencies close to 100%, high concentrations of formic acid and long-term stability. Analysing the main results reported in the literature, it was observed that to date further studies are necessary to…
Electrochemical conversion of CO2 to HCOOH at tin cathode in a pressurized undivided filter-press cell
2018
Abstract The electrochemical reduction of carbon dioxide to formic acid was performed for the first time in a pressurized filter-press cell with a continuous recirculation of the electrolytic solution (0.9 L) at a tin cathode. It was shown that the performances of the system are comparable or slightly better than that of a batch system with a smaller volume (0.05 L). The selection of proper values of both current density and CO2 pressure allowed to achieve quite high values of faradaic efficiencies. Long-time electrolyses have shown that the system is stable and that it can allow to generate quite high concentrations of HCOOH (about 0.4 M).
High-pressure synthesis of CO and syngas from CO2 reduction using Ni-N-doped porous carbon electrocatalyst
2022
Abstract Electrochemical conversion of CO2 to CO or syngas (CO/H2 mixture) is considered one of the most promising approaches to valorise waste-CO2. To develop the process on industrial scale, it would be necessary to use selective and inexpensive electrodes and to obtain high productivities with low energy consumption. In this frame, Ni−NC catalysts are considered among the most interesting ones because of their relatively low cost, high faradaic efficiency in CO ( F E C O ), and high stability. However, up to now, quite low productivities were obtained as a result of low current densities achieved in aqueous electrolytes. In this work, we have evaluated the performances of a Ni−NC electro…
ZnO/ZnS heterostructures for hydrogen production by photoelectrochemical water splitting
2016
This work studies the photoelectrochemical behavior of novel ZnO/ZnS heterostructures obtained by means of anodization in water and glycerol/water/NH4F electrolytes with different Na2S additions under controlled hydrodynamic conditions. For this purpose different techniques such as Field Emission Scanning Electronic Microscopy (FE-SEM) with EDX, Raman spectroscopy and photoelectrochemical water splitting tests under standard AM 1.5 conditions have been carried out. The obtained results showed that the hydrodynamic conditions promoted an ordered nanotubular morphology which facilitates electron-hole separation and consequently, the photoelectrochemical activity for water splitting is enhance…
Electrochemical oxidation of organics at metal oxide electrodes: The incineration of oxalic acid at IrO2-Ta2O5 (DSA-O2) anode
2008
Abstract The electrochemical incineration of oxalic acid (OA) at Ti/IrO2–Ta2O5 (DSA-O2) anode was investigated to find the influence of the operative parameters on the performances of the process. Polarization curves and chronoamperometric measurements indicate the probable occurrence of a direct electrochemical oxidation of OA at the surface of the DSA anode. In incineration electrolyses, the performances of the process in terms of OA conversion and current efficiency dramatically depend on the adopted operative conditions. Interestingly, very high OA removal and current efficiency were obtained when the process was performed at relatively high temperatures (50 °C) or in the presence of Na…
Structure and the metal-support interaction of the Au/Mn oxide catalysts
2010
Gold catalysts with loading 1 and 10 wt % were-prepared by deposition precipitation method with urea over mesoporous manganese oxide, obtained through a surfactant-assisted procedure by using cetyltrimethylammonium bromide (CTAB), followed by treatment with sulphuric acid. For comparison, Au(10 wt %) was also deposited over commercial CeO2 and SiO2 supports. The materials were characterized by XRD and EXAFS at the Mn K and Au L-III edges and XPS. Moreover, the analyses were performed on the samples treated under 1%CO/He, at 250 degrees C for 90 min. The structural and surface results of the as prepared manganese oxide confirmed the formation of gamma-MnO2 along with some amorphous Mn3O4 upo…
Influence of Nitrogen Doping on Device Operation for TiO 2 -Based Solid-State Dye-Sensitized Solar Cells: Photo-Physics from Materials to Devices
2016
International audience; Solid-state dye-sensitized solar cells (ssDSSC) constitute a major approach to photovoltaic energy conversion with efficiencies over 8% reported thanks to the rational design of efficient porous metal oxide electrodes, organic chromophores, and hole transporters. Among the various strategies used to push the performance ahead, doping of the nanocrystalline titanium dioxide (TiO 2) electrode is regularly proposed to extend the photo-activity of the materials into the visible range. However, although various beneficial effects for device performance have been observed in the literature, they remain strongly dependent on the method used for the production of the metal o…