Search results for "OPTICS"
showing 10 items of 10033 documents
Analysis of Organic Aerosols Using a Micro-Orifice Volatilization Impactor Coupled to an Atmospheric-Pressure Chemical Ionization Mass Spectrometer
2014
We present the development and characterization of a combination of a micro-orifice volatilization impactor (MOVI) and an ion trap mass spectrometer (IT/MS) with an atmospheric-pressure chemical ionization (APCI) source. The MOVI is a multi-jet impactor with 100 nozzles, allowing the collection of aerosol particles by inertial impaction on a deposition plate. The pressure drop behind the nozzles is approximately 5%, resulting in a pressure of 96 kPa on the collection surface for ambient pressures of 101.3 kPa. The cut-point diameter (diameter of 50% collection efficiency) is at 0.13 μm for a sampling flow rate of 10 L min–1. After the collection step, aerosol particles are evaporated by he…
<title>A portable device for optical assessment of the cardiovascular condition</title>
2003
A hand-held prototype device for detection and processing of the tissue-remitted optical signals has been developed and tested. The photoplethysmography (PPG) principle was applied to follow the dilation and contraction of skin blood vessels during the cardiac cycle. Cardiovascular condition of the monitored person was assessed by temporal analysis of the recorded PPG signals as well as by shape analysis of the mean single-period PPG signals.© (2003) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
A Robust and Simple Measure for Quality-Guided 2D Phase Unwrapping Algorithms
2016
Quality-based 2D phase unwrapping algorithms provide one of the best tradeoffs between speed and quality of results. Their robustness depends on a quality map, which is used to build a path that visits the most reliable pixels first. Unwrapping then proceeds along this path, delaying unwrapping of noisy and inconsistent areas until the end, so that the unwrapping errors remain local. We propose a novel quality measure that is consistent, technically sound, effective, fast to compute, and immune to the presence of a carrier signal. The new measure combines the benefits of both the quality-guided and the residue-based phase unwrapping approaches. The quality map is justified from the two diff…
Nondestructive fluorescence-based quantification of threose-induced collagen cross-linking in bovine articular cartilage.
2012
Extensive collagen cross-linking affects the mechanical competence of articular cartilage: it can make the cartilage stiffer and more brittle. The concentrations of the best known cross-links, pyridinoline and pentosidine, can be accurately determined by destructive high-performance liquid chromatography (HPLC). We explore a nondestructive evaluation of cross-linking by using the intrinsic fluorescence of the intact cartilage. Articular cartilage samples from bovine knee joints were incubated in threose solution for 40 and 100 h to increase the collagen cross-linking. Control samples without threose were also prepared. Excitation-emission matrices at wavelengths of 220 to 950 nm were acquir…
Damming an electronic energy reservoir: ion-regulated electronic energy shuttling in a [2]rotaxane
2021
We demonstrate the first example of bidirectional reversible electronic energy transfer (REET) between the mechanically bonded components of a rotaxane. Our prototypical system was designed such that photoexcitation of a chromophore in the axle results in temporary storage of electronic energy in a quasi-isoenergetic “reservoir” chromophore in the macrocycle. Over time, the emissive state of the axle is repopulated from this reservoir, resulting in long-lived, delayed luminescence. Importantly, we show that cation binding in the cavity formed by the mechanical bond perturbs the axle chromophore energy levels, modulating the REET process, and ultimately providing a luminescence read-out of c…
Output Field-Quadrature Measurements and Squeezing in Ultrastrong Cavity-QED
2015
We study the squeezing of output quadratures of an electro-magnetic field escaping from a resonator coupled to a general quantum system with arbitrary interaction strengths. The generalized theoretical analysis of output squeezing proposed here is valid for all the interaction regimes of cavity-quantum electrodynamics: from the weak to the strong, ultrastrong, and deep coupling regimes. For coupling rates comparable or larger then the cavity resonance frequency, the standard input–output theory for optical cavities fails to calculate the variance of output field-quadratures and predicts a non-negligible amount of output squeezing, even if the system is in its ground state. Here we show that…
Surface-plasmon hopping along coupled coplanar cavities
2007
International audience; We report on surface-plasmon propagation along coupled coplanar cavities periodically distributed in an otherwise unperturbed plasmonic crystal. We show that the dispersion of particular Bloch modes can exhibit multiple energy gaps that can be adjusted by choosing the cavity size. For resonant sizes, the composite crystals composed of juxtaposed cavities can support plasmon modes at frequencies within the gap of the unperturbed grating. In this case, we demonstrate that the surface-plasmon propagation relies on a hopping mechanism.
Experimental Study of Central Baffle Flume
2019
In this paper, the hydraulics of a central baffle flume (CBF) were experimentally studied. Extensive experimental runs were carried out to highlight the effects of different geometrical parameters such as baffle length, contraction ratio, and the length of upstream and downstream guide walls. Two different approaches, i.e., the Π theorem of dimensional analysis coupled with the incomplete self-similarity theory and the energy balance equation, were applied to deduce the stage–discharge formula of a CBF characterized by different geometrical parameters. The stage–discharge relationship deduced by the dimensional analysis approach was more accurate than that obtained by the energy approach. F…
Coprecipitation synthesis of Nd:YAG nanopowders II: the effect of Nd dopant addition the on Luminescence Properties
2009
Abstract Nanopowders of Yttrium Aluminium Garnet (Y3Al5O12, YAG) doped with neodymium (Nd:YAG, 0.2–24.0 at.%) were prepared using the co-precipitation method followed by an annealing treatment up to 950 °C. For a concentration of neodymium lower than 3.2 at.% the materials were found constituted by the garnet phase according to X-ray diffraction investigations. However, at higher neodymium loading the hexagonal and monoclinic forms of yttrium aluminium oxides were found together with the garnet phase. For Nd quantity lower than 0.8% the luminescence emission spectra appear to be nearly the same, indicating that in the examined range of composition the immediate surrounding of the emitting N…
Mechanical performance of experimental acrylic resins modified by nanoparticles after chemical and mechanical degradation.
2020
Background Different materials have been incorporated into the polymethylmethacrylate matrix to improve its performance. The aim of this study was to evaluate the degree of conversion (DC), the flexural strength (FS), the elasticity modulus (EM), and the effect of exposure to food-simulating liquids prior to brushing simulation on the gloss loss (GL) of experimental acrylic resins modified by nanoparticles. Material and methods Three different types of nanoparticles; silicon oxide (SiO2), cerium oxide (CeO2) and titanium oxide (TiO2) were added to a poly (methylmethacrylate) matrix, in proportions of 0.5wt%, 1wt% and 3wt% each, forming nine experimental groups. The acrylic resin was also te…