Search results for "OTU"
showing 10 items of 2539 documents
Femtosecond four-wave-mixing spectroscopy of suspended individual semiconducting single-walled carbon nanotubes.
2010
Femtosecond four-wave-mixing (FWM) experiments of individual suspended semiconducting single-walled carbon nanotubes (SWCNTs) are presented. The chiral indices of the tubes were determined by electron diffraction as (28,14) and (24,14) having diameters of 2.90 and 2.61 nm, respectively. The diameter and semiconducting character of the tubes were additionally confirmed by resonance Raman measurements. The FWM signal showed electronic response from the SWCNTs. The results demonstrate that ultrafast dynamics of individual SWCNTs can be studied by FWM spectroscopies.
Epoxy composites filled with high surface area-carbon fillers
2013
Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…
Alginate gel beads filled with halloysite nanotubes
2013
Abstract Novel hybrid gel beads with a well defined and controlled size formed by alginate biopolymer and halloysite (Hal) nanotubes were designed, prepared and characterized from the physico-chemical viewpoint. The thermogravimetry made it possible to determine the water content, the total as well as the local compositions of Hal into the gel beads. Dielectric spectroscopy evidenced that Hal reduced the fluctuation of ions. The SEM micrographs showed that the dried beads exhibit a rough surface, with pores in the micrometer range. In addition, the concentration of nanotubes was higher into the bead core at a higher overall loading. The performance of these materials was verified with the s…
Recent applications of carbonaceous nanosorbents for the analysis of mycotoxins in food by liquid chromatography: a short review
2019
Carbonaceous nanomaterials (multi-walled carbon nanotubes (MWCNTs), graphene, and graphene oxide (GO)) have attracted attention over the last decade as adsorbents suitable for the analysis of organic and inorganic pollutants. In the present paper we review methods of mycotoxin analysis that involve sample extraction with carbonaceous nanosorbents, reported from 2011 onwards. Recent studies have highlighted the advantages of magnetically modified MWCNTs and GO in mycotoxin analysis, which may enable sample isolation through magnetic separation, reduce the interaction of nanoparticles, and enhance the recovery of analytes. The papers covered in this review point to promising applications of …
Simulation of electromagnetic properties in carbon nanotubes and graphene-based nanostructures
2012
As carbon nanotubes (CNT) and graphene nanostructures (GNR) constitute the basis of high-speed nanoelectronics and nanosensors, we examine the fundamental properties of var- ious CNT-metal (Me), GNR-Me, and CNT-graphene interconnects. The cluster approach based on the multiple scattering theory as well as effective medium approximation were used to model the dispersion law, electronic density of states (DOS), and conductivity, etc. Multiple scattering problems were solved for nanostructures with radial (quantum dots) and axial (nanowires, nano- tubes) symmetry. Interconnect capacitances and impedances have been evaluated in the GHz and THz regimes. Parametrical numerical simulations of cond…
Nonlinear photo-oxidation of graphene and carbon nanotubes probed by four wave mixing imaging and spectroscopy (Presentation Recording)
2015
Graphene has high potential for becoming the next generation material for electronics, photonics and optoelectronics. However, spatially controlled modification of graphene is required for applications. Here, we report patterning and controlled tuning of electrical and optical properties of graphene by laser induced non-linear oxidation. We use four wave mixing (FWM) as a key method for imaging graphene and graphene oxide patterns with high sensitivity. FWM produces strong signal in monolayer graphene and the signal is highly sensitive to oxidation providing good contrast between patterned and non-patterned areas. We have also performed photo-oxidation and FWM imaging for air suspended carb…
Phosphomolybdic acid and mixed phosphotungstic/phosphomolybdic acid chitosan membranes as polymer electrolyte for H2/O2 fuel cells
2017
Abstract Flat, free-standing phosphomolybdic acid and mixed phosphotungstic/phosphomolybdic acid chitosan membranes were prepared by in-situ ionotropic gelation process at room temperature on porous alumina support firstly impregnated by heteropolyacid. Scanning electron microscopy revealed the formation of compact and homogenous polymeric membranes, whose thickness resulted to be dependent on reticulation time, and almost independent on the employed heteropolyacid nature and concentration. X-ray diffraction and Fourier transform infrared spectroscopy evidenced the formation of crystalline membranes without appreciable concentration of unprotonated NH 2 groups and heteropolyacid ions with p…
Synthesis and characterization of nanomaterial based on halloysite and hectorite clay minerals covalently bridged
2021
Halloysite is an aluminosilicate clay with a predominantly hollow tubular structure (HNTs) able to act as a nanocontainer for the encapsulation of several chemicals. However, HNTs possess low affinity for metal ions in their pristine form and they need to be modified for improving their adsorption capabilities. Therefore, to overcome this issue herein we report a straightforward approach for the covalent modification of the external surface of halloysite nanotubes with hectorite clay. Compared to halloysite, hectorite possesses a lamellar structure with higher cation exchange capacity. The covalent linkage between the two clays was verified by several techniques (FTIR spectroscopy, 13C CP-M…
Nanoscale membrane electrode assemblies based on porous anodic alumina for hydrogen–oxygen fuel cell
2007
In this paper, we demonstrate that nanoscale membrane electrode assemblies, functioning in a H 2/O 2 fuel cell, can be fabricated by impregnation of anodic alumina porous membranes with Nafion® and phosphotungstic acid. Porous anodic alumina is potentially a promising material for thin-film micro power sources because of its ability to be manipulated in micro-machining operations. Alumina membranes (Whatman, 50 μm thick, and pore diameters of 200 nm) impregnated with the proton conductor were characterized by means of scanning electron microscopy, X-ray diffraction, and thermal analysis. The electrochemical characterization of the membrane electrode assemblies was carried out by recording t…
DFT studies of OH-functionalized open-ended zigzag, armchair, and chiral single wall carbon nanotubes
2011
The functionalization of single-wall carbon nanotubes (SWCNTs) by attaching various molecules or molecular groups to the exterior walls or tips has attracted much attention, because it offers a possible way to modify their electronic, chemical, optical and mechanical properties. In this contribution the results of DFT studies of pristine and OH-modified open-ended zigzag (9,0), armchair (5,5) and chiral (8,2) nanotubes are reported. The calculations have been performed for partially and fully functionalized at one end model SWCNTs with dangling bonds saturated with hydrogen atoms and a nonadditive dependence of attachment energy on the number of substituents was observed.