Search results for "OXIDATION"
showing 10 items of 1913 documents
Characterization and properties of PEO coatings on 7075 Al alloy grown in alkaline silicate electrolyte containing KMnO 4 additive
2017
Abstract Plasma electrolytic oxidation (PEO) was used to modify the surface of 7075 Al alloy by applying a bipolar pulsed-current in a silicate based electrolyte containing 0 to 3 g L− 1 KMnO4. For the coating produced in the base electrolyte, crystalline γ-Al2O3 was the main phase, while the coatings formed at the presence of KMnO4 consisted of α-Mn2O3 containing Si and Al oxides. A pancake structure was observed on surface of the coating produced in the base electrolyte, while a foam feature along with some volcano-like areas was detected on the surface of the coatings produced in the presence of KMnO4. The KMnO4 changed the discharge type leading to diminish the pores at the metal/coatin…
Pluronic nanoparticles as anti-oxidant carriers for polymers
2016
Abstract The immobilization of anti-oxidant stabilizers for polymers, particularly naturally occurring systems, can be considered a valuable route for preventing their migration, volatilization, thermo-degradation and decomposition at typical high processing temperatures, as well as for enhance their solubility in polymers. In this work, an innovative approach for the immobilization of naturally occurring stabilizer, through the encapsulation in copolymer nanoparticles, is proposed. Pluronic nanoparticles (PNPs), based on PEO-PPO-PEO, (PEO: poly (ethylene oxide); PPO: poly(propylene oxide)), without and with quercetin, Q, have been successfully formulated and the critical micellar condition…
Synergy of Miniemulsion and Solvothermal Conditions for the Low-Temperature Crystallization of Magnetic Nanostructured Transition-Metal Ferrites
2017
Crystalline first-row transition-metal (Mn, Fe, Co, Ni, Cu, and Zn) ferrites were prepared by an unprecedented synergetic combination of miniemulsion synthesis and solvothermal route, pursuing unconventional conditions in terms of space confinement, temperature, and pressure. This synergy allowed for obtaining six different crystalline ferrites at much lower temperature (i.e., 80 °C) than usually required and without any postsynthesis thermal treatment. X-ray diffraction (XRD) revealed that analogous ferrites synthesized by miniemulsion at ambient pressure or in bulk (i.e., from an aqueous bulk solution and not in the confined space of the miniemulsion droplets) either at ambient pressure o…
Concentration-dependent anti-/pro-oxidant activity of natural phenolic compounds in bio-polyesters
2017
Abstract In this work, the potential of several naturally occurring phenolic compounds, such as Ferulic Acid (FA), Vanillic Acid (VA), Vitamin E (VE) and Quercetin (Q), as stabilizers against the photo-oxidative degradation of Polylactic acid (PLA) has been assessed. Specifically, PLA-based films containing different amounts of considered stabilizers have been formulated and their photo-stability under UVB exposure has been evaluated. The preliminary characterization of the formulated films shows that all used stabilizers exert plasticizing action, as probed by rheological analysis, due to their low molecular weight. Moreover, no significant modification of the PLA crystallinity has been no…
Effect of High Temperature Oxidation Process on Corrosion Resistance of Bright Annealed Ferritic Stainless Steel
2017
The corrosion resistance of stainless steels is determined by the thickness, structure, composition and electronic properties of the oxide layers grown on their surface and isolating the metallic substrate from the environment. In the present work, ex situ XPS (X-Ray Photoelectron Spectroscopy) and ToF-SIMS (Time of Flight Secondary Ions Mass Spectrometry) have been combined to in situ PCS (PhotoCurrent Spectroscopy) in order to perform an integrated physicochemical characterization of surface oxide films grown on bright annealed ferritic stainless steel (AISI 434) as-received and after thermal post-treatment in air. The surface oxide film on as-received samples has a bilayer structure with…
Effects of Pulse Current Mode on Plasma Electrolytic Oxidation of 7075 Al in KMnO4Containing Solution
2017
Plasma electrolytic oxidation of 7075 Al alloy was performed in alkaline silicate electrolyte containing KMnO4as an additive using unipolar (U) and bipolar pulsed current modes (B1 and B2). The coating grown using the bipolar current with longer cathodic pulse time (B2) revealed a more dense foam-like surface morphology with fewer volcano areas providing higher thickness, which is mainly raised by reduction in discharge intensity. Also, a lower concentration of electrolyte elements (Si and Mn) was incorporated into the coating providing a brighter appearance. EIS results showed very high inner layer resistances for the coatings indicating this layer controls the overall corrosion performanc…
The corrosion and tribocorrosion resistance of PEO composite coatings containing α-Al2O3 particles on 7075 Al alloy
2018
Abstract Plasma electrolytic oxidation (PEO) of 7075 Al alloy was carried out in silicate base electrolyte containing 200 nm diameter α-Al2O3 particles for producing composite coatings. The process was performed under a soft-sparking regime using a pulsed bipolar signal with several concentrations of α-Al2O3 particles. It was found that the incorporation of α-Al2O3 particles into the coating did not significantly alter the thickness and roughness of the coating. However, the α-Al2O3 particles were detected on surface of the composite coatings. Corrosion tests showed significant improvement in corrosion performance of the composite coatings due to the efficient pore blocking provided by α-Al…
Tuning the photocatalytic activity of bismuth wolframate: Towards selective oxidations for the biorefinery driven by solar-light
2017
The sol–gel entrapment of nanostructured Bi2WO6 enhances the activity and the selectivity of the short-gap semiconductor in the sunlight-driven photo-oxidation of trans-ferulic and trans-cinnamic acid dissolved in water with air as the primary oxidant. Valuable products such as vanillin, benzaldehyde, benzoic acid and vanillic acid are obtained. This provides the proof of concept that photocatalysis could be a promising technology in tomorrow's solar biorefineries.
Facile crosslinking of poly(vinylpyrrolidone) by electro-oxidation with IrO2-based anode under potentiostatic conditions
2018
Abstract: The modification of polymer architectures by reaction with chemically adsorbed hydroxyl radicals has been thoroughly investigated by electrolyzing dilute aqueous solutions of the biocompatible polymer poly(vinylpyrrolidone) (PVP), using an undivided electrolytic cell with a Ti/IrO2–Ta2O5(DSA®) anode. Several electrolyses were performed to assess the influence of the applied potential, the circulated charge and the PVP concentration, which was always kept low to avoid chain overlapping. From the results obtained, it can be concluded that the electro-oxidation of PVP solutions using a cheap anode is an effective method to crosslink initially isolated polymer chains, eventually incre…
Photocatalytic partial oxidation of limonene to 1,2 limonene oxide
2018
The silylation of crystalline TiO2 P25, commonly used for photocatalytic degradation of pollutants, results in an exceptionally selective catalyst for the aerobic limonene epoxidation to 1,2-limonene oxide under solar light irradiation. The hypothesized mechanism involves the singlet oxygen generated through energy transfer from the excited TiO2 to adsorbed O2 molecules. The reaction product is the valued precursor of bio-based poly(limonene carbonate), a thermoplastic polymer of superior thermal and optical properties whose industrial production is in need of an efficient green synthesis of limonene oxide.