Search results for "OXIDATION"
showing 10 items of 1913 documents
A Raman spectroscopy study of the oxidation processes in synthetic chromite FeCr2O4
2020
Abstract A crystal of synthetic chromite FeCr2O4 has been annealed in air at 700 °C for 50 days at room pressure in order to study physical-chemical changes. After the annealing treatment, Scanning Electron Microscopy (SEM) images of the polished surface of the sample showed areas of different composition. Detailed Raman mapping revealed that the annealed chromite undergoes an oxidation process, proceeding inwards from the outer surface and leading to the transformation of chromite to magnetite, and ultimately to hematite. The oxidation process also leads to the formation of trellis-like lines, arguably via stress-related mechanisms associated with the phase transformation and consequent vo…
Surface termination effects on the oxygen reduction reaction rate at fuel cell cathodes
2018
This research was partly funded by the Latvian project IMIS2 with the computer resources provided by the High Performance Computing Centre Stuttgart (HLRS) (Project DEFTD 12939). The authors thank D. Gryaznov for fruitful discussions and M. Sokolov for technical assistance. MMK is grateful to the Office of the Director of National Science Foundation for support under the Independent Research and Development program. The ndings, conclusions, and recommendations expressed in this material are those of the authors and do not necessarily reect the views of NSF and other funding agencies.
Electronic Properties of Thermal Oxides on Ti and Their Influence on Impedance and Photoelectrochemical Behavior of TiO2 Nanotubes
2017
Thermal oxidation of titaniumwas carried out at 350◦C, 450◦C, and 550◦C for 2 h or 12 h.X-rayDiffraction and Raman Spectroscopy suggest that the thermal oxides are scarcely crystallinewhen the annealing temperature is low, while both anatase and rutile are present for high annealing temperature and time. Photoelectrochemical measurements allowed estimation of a bandgap decreasing from 3.35 eV to 3.15 eV with increasing annealing temperature. The impedance spectra confirmed the formation of n-type semiconductors, with an impedance strongly decreasing on going from a reverse bias toward a forward bias regime. TiO2 nanotubes grown by anodizing Ti in NH4F and water containing ethylene glycol so…
Catalytic oxidation of n-hexane promoted by Ce1-xCuxO2 catalysts prepared by one-step polymeric precursor method
2013
Abstract Ceria-supported copper catalysts (Ce1−xCuxO2, with x (mol) = 0, 0.01, 0.03, 0.05 and 0.10) were prepared in one step through the polymeric precursor method. The textural properties of the catalysts were investigated by X-ray diffraction (XRD), Rietveld refinement, N2-physisorption (BET surface area), electron paramagnetic resonance (EPR), UV–visible diffuse reflectance and photoluminescence spectroscopies and temperature-programmed reduction (TPR). In a previous study ceria-supported copper catalysts were found to be efficient in the preferential oxidation of CO. In this study, we extended the catalytic application of Ce1−xCuxO2 systems to n-hexane oxidation and it was verified tha…
Effects of pulse current mode on plasma electrolytic oxidation of 7075 Al in Na2WO4 containing solution: From unipolar to soft-sparking regime
2018
Abstract Plasma electrolytic oxidation coatings were produced on 7075 Al alloy in a silicate based solution containing sodium tungstate using unipolar, usual bipolar and soft-sparking bipolar pulsed current regimes. X-ray diffraction proved that the coatings contain gamma alumina and metallic tungsten. EDS results showed that the tungsten content decreases with increasing the negative half cycle. Scanning electron microscopy showed that the pancake and volcano-like were dominant morphologies for the coatings produced by the unipolar and bipolar current regimes, respectively. Under unipolar current regime, a band of large pores is observed at the metal/coating interface, while they became di…
High-density polyethylene facial implants show surface oxidation in SEM and EDX examination: a pilot study.
2009
Previous histopathological studies on explanted Medpor high-density polyethylene (HDPE) facial implants indicated signs of material destruction and claimed to observe phagocytized HDPE particles within the tissue samples beside the usual type IV reaction with severe fibrosis. We examined new and explanted Medpor material with scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDX). The implant surface of three patient-derived specimens showed significantly higher oxygenation in EDX analysis and morphological changes in SEM compared to the new unused material directly after opening of the package and after 1 year of exposure to air. Our preliminary findings indicate a p…
Oxidation of magnesia-supported Pd-clusters leads to the ultimate limit of epitaxy with a catalytic function
2005
Oxide-supported transition-metal clusters and nanoparticles have attracted significant attention owing to their important role as components of model catalysts, sensors, solar cells and magnetic recording devices. For small clusters, functionality and structure are closely interrelated. However, knowledge of the structure of the bare cluster is insufficient as the interaction with the chemical environment might cause drastic structural changes. Here we show by ab initio simulations based on the density functional theory that the reaction with molecular oxygen transforms small, non-crystalline, magnesia-supported Pd-clusters to crystalline Pd(x)O(y) nano-oxide clusters that are in epitaxy wi…
Effect of germanium addition on the properties of reactively sputtered ZrN films
2005
For the first time, Zr-Ge-N films were deposited on silicon and steel substrates by sputtering a Zr-Ge composite target in reactive Ar-N2 mixture. The films were characterised by electron probe microanalysis, X-ray diffraction, micro-Raman spectroscopy and depth-sensing indentation. The effects of the Ge content and substrate bias voltage on the films' structure, internal stress, hardness and oxidation resistance were investigated. Substrate bias strongly influenced the chemical composition of the films being observed by means of a steep decrease in the Ge content for negative bias voltages higher than -80 V. In these cases, a significant hardness improvement was registered. For -100 V bias…
Alumina supported Pt(1%)/Ce0.6Zr0.4O2 monolith: Remarkable stabilization of ceria–zirconia solution towards CeAlO3 formation operated by Pt under red…
2009
Abstract A structured Pt(1 wt%)/ceria–zirconia/alumina catalyst and the metal-free ceria–zirconia/alumina were prepared, by dip-coating, over a cordierite monolithic support. XRD analyses and Rietveld refinements of the structural data demonstrate that in the Pt supported catalysts ceria–zirconia is present as a Ce 0.6 Zr 0.4 O 2 homogeneous solid solution and that the deposition over the cordierite doesn’t produce any structural modification. Moreover no Pt sintering occurs. By comparing the XRD patterns recorded on Pt/ceria–zirconia/alumina and ceria–zirconia/alumina after three redox cycles, it results that Pt, favouring the structural reorganization of the ceria–zirconia into one cubic …
Au/CeO2-SBA-15 catalysts for CO oxidation: Effect of ceria loading on physic-chemical properties and catalytic performances
2012
In this work gold catalysts supported over SBA-15 with different CeO 2 loadings (5-30 wt%) were prepared, characterized by N 2 physisorption analyses, SAXS, XRD, STEM and XPS techniques and their catalytic performances were evaluated in the CO oxidation, chosen as reaction test. Over a selected catalyst, Au/CeO 2(20 wt%)-SBA-15, the effect of CO 2 and of the mixture (CO 2 + H 2O) on the CO conversion to CO 2 was also evaluated. Characterizations by SAXS, XRD, STEM and XPS were carried out on selected spent catalysts after CO oxidation. The results were discussed in terms of relationship between morphological, structural, electronic and catalytic properties as a function of the ceria loading…