Search results for "Optical"
showing 10 items of 7671 documents
Enhanced supercontinuum generation in tapered tellurite suspended core fiber
2015
Abstract We demonstrate 400-THz (0.6–3.3 µm) bandwidth infrared supercontinuum generation in a 10 cm-long tapered tellurite suspended core fiber pumped by nJ-level 200-fs pulses from an optical parametric oscillator. The increased nonlinearity and dispersion engineering extended by the moderate reduction of the fiber core size are exploited for supercontinuum optimization on both frequency edges (i.e., 155-THz overall gain), while keeping efficient power coupling into the untapered fiber input. The remaining limitation of supercontinuum bandwidth is related to the presence of the high absorption beyond 3 µm whereas spectral broadening is expected to fully cover the glass transmission window…
Dissipative rogue wave generation in multiple-pulsing mode-locked fiber laser
2013
Following the first experimental observation of a new mechanism leading to optical rogue wave (RW) formation briefly reported in Lecaplain et al (2012 Phys. Rev. Lett. 108 233901), we provide an extensive study of the experimental conditions under which these RWs can be detected. RWs originate from the nonlinear interactions of bunched chaotic pulses that propagate in a fiber laser cavity, and manifest as rare events of high optical intensity. The crucial influence of the electrical detection bandwidth is illustrated. We also clarify the observation of RWs with respect to other pulsating regimes, such as Q-switching instability, that also lead to L-shaped probability distribution functions.…
A distributed model for continuous-wave erbium-doped fiber laser
2011
Abstract A distributed model of a continuous-wave erbium-doped fiber laser is discussed. The model is based on two contra-propagated traveling laser waves, and includes inhomogeneous pumping, excited state absorption at the pump and the laser wavelengths, amplified spontaneous emission and radial distribution of populations of erbium levels. It is shown that excited state absorption is a main limiting factor to the laser's efficiency. Moreover, consideration of radial distributions of erbium levels' populations in the model reduces laser efficiency and decreases optimal reflection of the laser output coupler. The modeling results are in excellent agreement with the experimental study on the…
High-efficiency Q-switched erbium fiber laser using a Bragg grating-based modulator
2002
Abstract In this work we analyze the behavior of an erbium-doped fiber laser which is based on a simple scheme. Excitation of the active medium is performed in the 980 nm pump band with a CW semiconductor laser source. Two fiber Bragg gratings acting as mirrors of the Fabry–Perot laser cavity were used. One of these gratings was mounted over a piezoelectric (PZT) element. By applying voltage pulses to the piezoelectric, the laser cavity was temporally modulated and Q-switched laser pulses up to 530 mW peak powers at 3 kHz were obtained. Typical laser emission of 2–3 μs temporal widths and 0.1 nm of optical bandwidth have been achieved when the system was operated at 18.5 kHz repetition rate…
Single-frequency active Q-switched Distributed Fiber Laser Using Acoustic Waves
2007
This letter presents a single mode, actively Q-switched distributed feedback fiber laser. Acoustic pulses are launched into an erbium-doped fiber Bragg grating, resulting in the introduction of a traveling defect. Thus, a transmission peak appears in the reflection band while the pulse travels along the grating. This effect allows the laser to operate in a Q-switched regime, providing optical pulses which repetition rate was continuously tuned up to 10 kHz. Pulses of 168 mW of peak power and 73 ns of temporal width were obtained at low repetition rate.
Nonlinear dynamics of a two-photon Fabry–Pérot laser
2000
Abstract The steady-state emission, stability and temporal dynamics of a single-mode two-photon laser with a Fabry–Perot cavity is investigated and compared with that of a ring-cavity laser. It is found that the Fabry–Perot cavity makes the laser less efficient than the ring cavity because of spatial hole burning, but the domain of stability is larger for the Fabry–Perot laser. The intensity and phase dynamics are numerically investigated and distinctive features are found in the phase dynamics as compared with one-photon lasers.
Polarization switchable Erbium-doped all-fiber laser
2008
We report an experimental study of an erbium-doped all-fiber laser with electrically switchable output polarization. Fiber Bragg grating written in a polarization maintaining optical fiber and attached to a piezo-ceramic actuator is used to commute the polarization state of the laser emission. The laser oscillates at one of two orthogonal polarizations depending on voltage applied to the actuator.
All-fiber actively Q-switched Yb-doped laser
2006
Abstract An all-fiber actively Q-switched Yb-doped laser is presented. Q-switching is performed by modulating a fiber Bragg grating via a magnetostrictive rod which is fixed to the fiber at the position of the grating. By exposing the rod to a changing magnetic field, the rod is stretched and relaxed causing the Bragg wavelength of the grating to shift and thereby changes the Q-factor of the cavity. Using Yb-doped fiber, pulses at 1052 nm are obtained at repetition rates from 1 to 200 kHz. At 75 kHz, 0.5 μJ pulses with peak powers of 3 W can be produced when 180 mW of pump power is applied. To the knowledge of the authors, this is the first all-fiber actively Q-switched Yb-doped laser prese…
Fiber Ring Laser Operated by Dynamic Local Phase Shifting of a Chirped Grating
2009
An ultranarrow linewidth erbium-doped fiber ring laser is presented. It is based on the filtering properties of a phase-shifted chirped fiber Bragg grating, which is inserted inside the cavity of the laser. A dynamic control of the phase shifting, which is induced by a magnetostrictive transducer, permits both tunable continuous-wave and actively Q-switched operation. The use of a chirped grating overcomes the limitations imposed by the narrow spectra of uniform gratings observed in previously reported ring lasers based on intracavity transmission filters.
Q-switched all-fibre laser using a fibre-optic resonant acousto-optic modulator
2007
Abstract We report an actively Q-switched all-fibre laser using a fibre-optic resonant acousto-optic modulator as Q-switching element. The modulator consists of a short-length fibre Bragg grating modulated by a standing longitudinal elastic wave, being the grating length much shorter than the acoustic wavelength. Q-switch pulses were successfully obtained from an Er3+-doped fibre laser at repetition rates of 18 and 37 kHz.