Search results for "Optoelectronics"
showing 10 items of 2306 documents
High-efficiency Q-switched erbium fiber laser using a Bragg grating-based modulator
2002
Abstract In this work we analyze the behavior of an erbium-doped fiber laser which is based on a simple scheme. Excitation of the active medium is performed in the 980 nm pump band with a CW semiconductor laser source. Two fiber Bragg gratings acting as mirrors of the Fabry–Perot laser cavity were used. One of these gratings was mounted over a piezoelectric (PZT) element. By applying voltage pulses to the piezoelectric, the laser cavity was temporally modulated and Q-switched laser pulses up to 530 mW peak powers at 3 kHz were obtained. Typical laser emission of 2–3 μs temporal widths and 0.1 nm of optical bandwidth have been achieved when the system was operated at 18.5 kHz repetition rate…
Dual-kind Q-switching of erbium fiber laser
2014
Two different regimes of Q-switching in the same implementation of an actively Q-switched erbium-doped fiber laser are demonstrated. Depending on the active fiber length and repetition rate of an intracavity Q-cell (acousto-optic modulator), the laser operates either in the regime of common, rather long and low-power, pulses composed of several sub-pulses or in the one of very short and powerful stimulated Brillouin scattering-induced pulses. The basic physical reason of the laser system to oscillate in one of these two regimes is the existence or absence of CW narrow-line “bad-cavity” lasing in the intervals when the Q-cell is blocked.
Tunable dual-wavelength thulium-doped fiber laser in the range from 2067 to 2073.5 nm
2017
A tunable dual-wavelength lineal cavity Tm-doped fiber laser is presented. The generation of the laser lines is based on the use of cascaded fiber Bragg gratings and a Hi-Bi fiber optic loop mirror.
Q-switched all-fibre laser using a fibre-optic resonant acousto-optic modulator
2007
Abstract We report an actively Q-switched all-fibre laser using a fibre-optic resonant acousto-optic modulator as Q-switching element. The modulator consists of a short-length fibre Bragg grating modulated by a standing longitudinal elastic wave, being the grating length much shorter than the acoustic wavelength. Q-switch pulses were successfully obtained from an Er3+-doped fibre laser at repetition rates of 18 and 37 kHz.
Generation of Bound States of Three Ultrashort Pulses With a Passively Mode-Locked High-Power Yb-Doped Double-Clad Fiber Laser
2004
We report the generation of high-power ultrashort bound states of three pulses in an ytterbium-doped double-clad fiber laser. The laser is mode-locked through nonlinear polarization rotation technique in a unidirectional cavity configuration. A pair of diffraction grating is incorporated in the cavity to compensate for the normal dispersion of the fiber. The laser generates chirped bound states of three pulses with either equal or different time separations, with more than 500-pJ energy per pulse. These pulses are subsequently compressed to 100 fs with a compression factor of more than 40.
Actively Q-switched DFB fiber laser for Brillouin sensor applications
2009
Q-switching of distributed feedback (DFB) fiber lasers permits to achieve high peak powers, preserving an ultra narrow linewidth [1,2]. The development of a new in-line acousto-optic modulator based on a magnetostrictive actuator, instead of a piezoelectric-based device, permits an efficient excitation of elastic pulses propagating along the optical fiber and an easy access to both emission outputs of the laser. The repetition rate can be continuously adjusted, as well as the amplitude of the elastic pulses. The interaction of these elastic pulses with a fiber Bragg grating written in an erbium-doped fiber permits an actively Q-switched operation of the DFB fiber laser [3]. The birefringenc…
Single- to three-wavelength switchable ytterbium-doped fiber laser based on intracavity induced loss by a long-period holey fiber grating
2011
In this paper, we propose and demonstrate a versatile and simple single-, dual- and three-wavelength switchable ytterbium-doped fiber laser using the intracavity induced-loss generated by a mechanically induced long-period grating (MLPFG) in a holey fiber. The laser net gain in the cavity is reshaped through the MLPFG by adjusting the twist rate and the pressure of the holey fiber in the long-period grating. In this way, the twist response of the MLPFG enables the laser to switch between the single-, dual-, and three-wavelength operations and the tuning of the simultaneous two- and three-wavelengths. These results are of great interest in the design of flexible multiwavelength sources with …
Smart Q-switching for single-pulse generation in an erbium-doped fiber laser
2012
In this paper, we report an active Q-switching of an erbium-doped fiber laser with special modulation functions and novel laser geometry. We experimentally demonstrate that using such a smart Q-switch approach, Q-switch ripple-free pulses with Gaussian-like shape and 17.3 ns width can be easily obtained. The idea behind the smart Q-switch is to suppress one of two laser waves contra-propagating along the fiber cavity, which arises after Q-cell opening, and to eliminate the minor sub-pulses.
Active Q-switched distributed feedback erbium-doped fiber lasers
2005
This letter presents a distributed feedback fiber laser that operates in an actively controlled Q-switched regime. The laser is based on a Bragg grating made in an erbium-doped fiber. The grating has a defect induced by a magnetostrictive transducer that configures the distributed feedback laser structure. The phase shift generated by the defect can be dynamically modified by an electric current, permitting active Q-switching of the laser. The laser generates pulses of 75 ns duration and the repetition rate can be continuously adjusted from 0 to 10 kHz.
4W continuous-wave narrow-linewidth tunable solid-state laser source at 546nm by externally frequency doubling a ytterbium-doped single-mode fiber la…
2009
A high-power continuous-wave coherent light source at 545.5nm is described. We use 8.3W from a solid-state ytterbium-doped single-mode fiber oscillator/amplifier system as input into an external frequency doubling stage. This system produces up to 4.1 W of stable green single-frequency laser radiation. We characterize the light source by performing absorption spectroscopy on iodine across the full tuning range of the fiber laser and saturation spectroscopy on one strong iodine line of the doppler-broadened spectrum.