Search results for "Organic Chemical"
showing 10 items of 733 documents
Investigation of Activities for Pt-M Bimetallic Nanoparticles Catalysts on the Oxygen Reduction Reaction
2015
Bi-metallic Pt3Ni/C and Pt3Co/C electrocatalysts were successfully synthesized by a solvent free chemical vapour deposition method with a narrow particle size distribution. The results showed that the electrochemical surface area was increased by adding the additional Ni or Co to a pure Pt catalyst. Pt3Ni/C catalyst exhibited a significant enhancement of oxygen reduction reaction activity. The catalysts were characterized by EDS, XRD, HRTEM and electrochemical activity was determined using cyclic voltammetry.
Comparison of Structure and Properties of Differently Treated Illite Clay and Products
2014
The investigation is focused on modification of the structure 2:1 sheet silicates - illite clay by subjecting them to chemical and microbiological impact. It is shown that alkaline activation of illite clay by sodium hydroxide leads to the slight structural changes mainly characterized by water link changes. The effect of bacteria Ps. fluorescens AM PS11on structure changes of illite is small and is influenced on rheology of treated clay.It is shown that the influence of chemical treatment on porosity, bulk density and increase of compressive strength of sintered ceramic samples is notable.
Influence of oxide substrates on monolayer graphene doping process by thermal treatments in oxygen
2019
Abstract The structural and the electronic properties of monolayer graphene made by chemical vapor deposition and transferred on various oxide substrates ( SiO 2 , Al 2 O 3 , and HfO 2 ) are investigated by Raman Spectroscopy and Atomic Force Microscopy in order to highlight the influence of the substrate on the features of p-doping obtained by O 2 thermal treatments. By varing the treatment temperature up to 400 °C, the distribution of the reaction sites of the substrates is evaluated. Their total concentration and the consequent highest doping available is determined and it is shown that this latter is linked to the water affinity of the substrate. Finally, by varing the exposure time to …
Studies of structural composition distribution heterogeneity in ethylene/1-hexene copolymers using thermal fractionation technique (SSA)
2005
Abstract Investigations into the compositional heterogeneity of ethylene/1-hexene copolymers obtained with various zirconocene/MAO catalysts, either homogeneous or supported on inorganic carriers such as a complex of magnesium chloride with tetrahydrofuran or methyl alcohol, were conducted. The dependence between metallocene structure, as well as catalyst immobilization, and the compositional heterogeneity of the related products was investigated. It was found that the heterogeneity of copolymers is determined by the metallocene catalyst structure. The amount of peaks on the DSC thermograms of copolymers and their division increase with the increase of bulkiness of the ligand in the catalyt…
EPR/ALANINE PELLETS WITH LOW Gd CONTENT FOR NEUTRON DOSIMETRY
2013
This paper reports on results obtained by electron paramagnetic resonance (EPR) measurements and Monte Carlo (MC) simulation on a blend of alanine added with low content of gadolinium oxide (5 % by weight) to improve the sensitivity to thermal neutron without excessively affecting tissue equivalence. The sensitivity is enhanced by this doping procedure of more an order of magnitude. The results are compared with those obtained with the addition of boric acid (50 % by weight) where boron is in its natural isotopic composition in order to produce low-cost EPR dosemeters. The gadolinium addition influences neutron sensitivity more than the boron addition. The presence of additives does not sub…
Total oxidation of VOCs on Au nanoparticles anchored on Co doped mesoporous UVM-7 silica
2012
Abstract Gold deposited on a cobalt containing siliceous mesoporous structure, UVM-7, presents a good catalytic performance in the total oxidation of propane and toluene. The presence of both gold and cobalt is necessary as bimetallic Au/Co-UVM-7 catalysts are remarkably more active than monometallic Au/UVM-7 or Co-UVM-7 catalysts. The improved activity of the bimetallic AuCo-samples if compared to gold free cobalt catalysts can be explained on the basis of the enhanced reducibility of some cobalt species in the presence of gold, which facilitates the redox cycle. This high reducibility of cobalt species in the bimetallic samples is probably due to the formation of Co 3 O 4 domains at the g…
Solvothermal Synthesis of Molybdenum–Tungsten Oxides and Their Application for Photoelectrochemical Water Splitting
2018
Molybdenum and tungsten oxides are of interest as semiconductors for the production of clean and sustainable energy. Here we show that synergistic effects arising from a combination of noncrystalli...
Design of PNIPAAM covalently grafted on halloysite nanotubes as a support for metal-based catalysts
2016
A thermo-responsive polymer such as poly(N-isopropylacrylamide) (PNIPAAM) was covalently grafted on the external surface of halloysite nanotubes (HNTs) by means of microwave irradiation. This nanomaterial was used as a support and stabilizer for palladium nanoparticles. The obtained HNT–PNIPAAM/PdNPs was characterized by means of TGA, SEM, EDS and TEM analyses. The palladium content of the catalyst was estimated to be 0.4 wt%. The stability of the catalytic material at different temperatures (below and above the PNIPAAM lower critical solution temperature) was tested in the Suzuki reaction under microwave irradiation. In addition, TEM analysis after five consecutive runs was performed. The …
NOx selective catalytic reduction at high temperatures with mixed oxides derived from layered double hydroxides
2012
[EN] Mixed oxides derived from layered double hydroxides (LDHs) have been investigated as potential catalysts for the NOx removal at high temperatures. The best results were obtained with Co–Al mixed oxides derived from LDHs that are active at 750 ◦C in the presence of oxygen and water. These catalysts could reduce or/and decompose the NOx formed in the dense phase of the FCC regenerator, being deactivated at oxygen concentrations higher than 1.5%. Nevertheless this deactivation is not permanent and they would be regenerated after reduction with hydrogen at 530 ◦C. The influence of the layered double hydroxides (LDHs) preparation method on the catalyst activity was studied, observing that t…
Easy Method for the Transformation of Levulinic Acid into Gamma-Valerolactone Using a Nickel Catalyst Derived from Nanocasted Nickel Oxide
2019
Different nickel catalysts have been tested for the transformation of levulinic acid into &gamma