Search results for "Out-of-plane"
showing 10 items of 20 documents
Prediction of the out-of-plane response of infilled frames under seismic loads by a new fiber-section macro-model
2016
This chapter suggests that an extension of the capability of the traditional inplane macro-models to capture the simultaneous in-plane and Out-Of-Plane (OOP) response of infills. A new simplified macro-model for the assessment of both in plane and out-of-plane responses of infilled frames was developed and validated. The possibility to simulate the arching action is achieved by using distributed plasticity fiber-section elements, able to directly account for the coupling between axial load and bending moment. The arching action is explicitly introduced by the use of fiber-section beam-column elements, which can model the coupling between axial-load and bending moment. The model presented is…
Flexural behaviour of glass panels under dead load and uniform lateral pressure
2013
Abstract In the present paper the experimental results relative to flexural tests on out-of-plane loaded large scale panels made of laminated structural glass are presented and discussed. Glass panels are parts of the structural facade of the Fontanarossa International Airport of Catania (Italy). Panels are mounted on a rigid testing frame and loaded with an uniformly distributed lateral pressure. Two different kinds of tests were carried-out, cyclic and monotonic, able to reproduce the serviceability and the ultimate conditions of the glass panels when subjected to the coupled effects of dead load and horizontal forces, the latter reproducing the wind action. Results obtained focused the h…
Effect of FRP strengthening on the flexural behaviour of calcarenite masonry walls
2017
The use of fiber-reinforced polymers (FRP) for structural strengthening has become increasingly popular in recent years. Several applications of FRP have been proposed and applied, depending on the target of the technique, kind and/or material of the structural member. In particular, because of their great tensile strength, FRP materials are commonly used to enhance the out-of-plane behaviour of masonry walls, allowing to increase their strength, ductility and improving safety against overturning. For these reasons, FRP laminates are often applied in vulnerable ancient buildings in seismic areas to reinforce façades and walls with poor structural features. However, some issues arise when a…
Out-of-Plane Behavior of URM Infill: Accuracy of Available Capacity Models
2022
The aim of this paper is to check the accuracy of analytical capacity models available for the prediction of out-of-plane strength of unreinforced masonry (URM) infill walls. The accuracy of the available models is checked by detailed comparison with the existing experimental results. In doing so, both types of capacity models are evaluated: Type I for the prediction of the strength in the undamaged state, and Type II for the prediction of strength reduction in the in-plane damaged state. Results from the calculations are discussed, and the best among the available models are recommended. Furthermore, the influence of orthotropy of the infill masonry in the out-of-plane capacity predicted b…
Prediction Equations for Out-of-Plane Capacity of Unreinforced Masonry Infill Walls Based on a Macroelement Model Parametric Analysis
2021
In the seismic performance assessment of reinforced concrete (RC) frames, a reliable estimation of the capacity of unreinforced masonry (URM) infill walls is of utmost importance to ensure structural safety conditions. With particular attention to the out- of-plane (OoP) capacity of URM infill walls after in-plane (IP) damage, the issue of defining reliable analytical prediction models for the assessment of the capacity is an ongoing study. In this paper, empirical equations are proposed for the evaluation of the infilled frame’s OoP capacity, with or without IP damage, based on an extensive numerical parametric analysis, focusing on the influence of the key parameters that govern the mecha…
Macroelement Model for In-Plane and Out-of-Plane Responses of Masonry Infills in Frame Structures
2018
A new macroelement model is presented in this paper for the simulation of the in-plane (IP) and out-of-plane (OOP) response of infilled frames subjected to seismic actions. The model consists of two diagonal, one horizontal, and one vertical struts. Each strut is represented by two fiber-section beam-column elements. The model is able to capture the arching action of the wall under an OOP load as well as the interaction between the IP and OOP actions. The proposed modeling approach is sufficiently simple and efficient that it can be used for the static or dynamic analysis of an entire structural system. An experimental validation has been carried out. A further numerical study performed wit…
MODELLING IN-PLANE AND OUT-OF-PLANE RESPONSE OF INFILLED FRAMES THROUGH A FIBER MACRO-MODEL
2017
A new fiber macro-model for the simulation of combined in-plane and out-of plane response of infilled frames subjected to seismic actions is presented in the paper. The model consists of 4 pinned struts (two diagonals, one horizontal and one vertical) modeled with the nonlinear beam/column fiber-section elements available in OpenSees. The model is particularly suitable to predict the out-of-plane response as fiber-section elements can account for the coupling between axial load and bending moment occurring because of the arching mechanism developed by the infills beyond the first cracking. Moreover the model can account for the effect of the reciprocal damaging accumulated both in-plane and…
Finite element analysis of the out-of-plane behavior of FRP strengthened masonry panels
2017
Abstract In the present study a numerical model is proposed for the response of out-of-plane loaded calcarenite masonry walls strengthened with vertical CFRP strips applied on the substrate by means of epoxy resin. A simplified structural scheme is considered consisting in a beam fixed at one end, subjected to constant axial load and out-of-plane lateral force monotonically increasing. Two different constraint conditions are taken into account: in the first one, the panel is assumed free to rotate at the top end while, in the second one, the rotation is restrained. Three-dimensional finite elements are used for the calcarenite parts and an equivalent constitutive law available in the litera…
Nonlinear FE analysis of out-of-plane behaviour of masonry walls with and without CFRP reinforcement
2014
Abstract The out-of-plane behaviour of unreinforced and CFRP reinforced masonry wall is studied by means of experimental investigation and numerical FE modelling. The latter is based on a linear constitutive law both for ashlars and mortar joints constituting masonry and the lines of potential delamination are taken into account by means of an interface element with bi-linear law, reproducing the opening failure mode. When reinforcement is introduced, an interface element with bi-linear law is also used, reproducing sliding failure mode. Comparison between numerical and experimental results show the reliability of the modelling. Moreover, a parametric analysis is carried out in order to inv…
Numerical modelling of out-of-plane response of infilled frames: State of the art and future challenges for the equivalent strut macromodels
2017
Abstract Infill-frame interaction constitutes a still open question both in research and in practicing engineering. Computational models used to predict this interaction are, in most cases, addressing the estimation of the response of the infilled frames when subjected to actions parallel to their plane. However, the observation of the post-earthquake damage has demonstrated that infills, weakened by the in-plane actions, may fail out-of-plane increasing the risks associated to the earthquake scenarios. In spite of this, different studies have shown that infills, if properly designed and supported by the frame, exhibit a significant strength and displacement capacity when called to resist t…