Search results for "Oxidation."
showing 10 items of 1877 documents
Influence of fluorine on the synthesis of anatase TiO2for photocatalytic partial oxidation: Are exposed facets the main actors?
2018
Anatase TiO2 samples were synthesized in the presence of different amounts of HF acid with the aim of understanding the effect of the presence of fluorine on the photocatalytic activity. It is well known that the presence of fluoride ions influences the photocatalytic performance by adsorption on the surface of TiO2 and that they are capping agents in the control of specific exposed facets. The samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, nitrogen adsorption–desorption measurements, scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrophotometry, and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was eva…
Understanding the role of Ti-rich domains in the stabilization of gold nanoparticles on mesoporous silica-based catalysts
2018
3 Tablae, 14 Figures.-- Supplementary material.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
Visible light photocatalytic activity of macro-mesoporous TiO2-CeO2inverse opals
2018
Macro-mesoporous TiO2 inverse opal materials were synthesized and they were tested as photocatalysts under visible light irradiation. The influence of cerium oxide addition towards the Rhodamine B (RhB) photodegradation activity was evaluated. Structural, textural, spectral and surface properties of the TiO2-CeO2 inverse opal nanocomposites were studied by XRD, XPS, SEM, TEM, N2 adsorption-desorption, Diffuse Reflectance UV–vis and Photoluminescence spectroscopies. Compared to commercial TiO2 anatase, the macro-mesoporous TiO2 inverse opal exhibited six times higher kinetic rate constant in the RhB degradation under visible light irradiation. The good photocatalytic activity was related to …
Alkaline treatment as a means to boost the activity of TiO(2)in selective photocatalytic processes
2020
In this work, the activity enhancement of TiO(2)photocatalysts by alkaline treatment has been investigated. Commercial (BDH, U.K., anatase phase) TiO(2)samples, treated in alkaline solutions of NaOH at different concentrations and temperatures, were tested for the photocatalytic partial oxidation of 3-pyridinemethanol in water under UVA irradiation to form vitamin B-3. Photocatalyst characterization has been carried out by XRD, BET, TEM, TGA, photoluminescence, FTIR, Raman, DRS, EPR and photocurrent measurements. The alkaline-treated samples showed an increased activity of up to 7 times (by considering first order rate constant values) compared to untreated BDH and the superior performance …
The influence of the anatase nanoparticles boundaries on the titania activity performance
2014
Metal oxides structures, formed by ordered self-assembling of crystalline nanoparticles aggregates, are attracting growing attention in fields such as catalysis or solar cells. The properties of these structures are influenced not only by their morphology and nanoparticles composition but also by the assembled particles boundaries. In order to determine the influence of these boundaries on the structures properties, the present investigation has been devoted to study the characteristics of anatase nanoparticles boundaries in titania aggregates prepared by TiCl4 hydrolysis at low temperature. Proton magic angle spinning nuclear magnetic resonance and high resolution transmission electron mic…
Fourier Transform Infrared Study of the Performance of Nanostructured TiO2 Particles for the Photocatalytic Oxidation of Gaseous Toluene
2001
Thermal and hydrothermal treatments have been applied to an amorphous TiO2 precursor for obtaining nanosized TiO2 particles (P11t and P11h, respectively) of different photocatalytic properties. The activity of these catalysts has been tested by performing the toluene oxidation in gas phase in a continuous photoreactor. A Fourier transform infrared (FTIR) investigation of the catalysts under conditions prevailing during the test photoreaction has also been carried out. The photoreactivity results showed that CO2 was the main oxidation product and benzaldehyde a stable intermediate. Anatase P11t photoactivity was similar to that observed for commercial photocatalysts, while anatase P11h prese…
Photoactivity of shape-controlled TiO2 in gas-solid regime under solar irradiation
2019
Abstract Differently shape-controlled anatase TiO2 materials were tested as photocatalysts under both simulated and natural solar irradiation. Their photocatalytic activity in 2-propanol and propene partial oxidation and in the complete mineralization of acetaldehyde appears to increase with decreasing the shape control of the TiO2 material. This insight seems to be related to the residual presence of the templating species (fluoride anions) employed during the preparation of the shape-controlled TiO2 materials. In fact, the calcination of the powders, leading to levelling of the fluoride ions content, but also to a remarkable surface area decrease, gave rise to an increase of photocatalyti…
Activity of phthalocyanine-sensitized TiO2-anatase in photooxidation of sulfite ions
2015
Abstract Hybrid catalysts based on the TiO2 matrix impregnated with Nd, Eu and Yb diphthalocyanines proved effective in oxidation of sulfite ions under irradiation with light from the UV-visible range. Micro- and nano-crystalline anatase powders were used in preparation of the photocatalysts, which were applied in the form of a suspension in the water phase. The reaction yield was found to depend on the phthalocyanine sensitizer used and the conditions of TiO2 impregnation. The best results were obtained when micro-anatase impregnated with Yb-diphthalocyanine was used.
Study of the structural changes induced by air oxidation in Ti–Si–N hard coatings.
2008
International audience; 3-μm thick Ti–Si–N coatings were deposited on polished X38CrMoV5 substrates by sputtering a composite Ti–Si target in Ar–N2 reactive mixture. Oxidation tests were performed in air at 700 °C during 2 h. Whatever the silicon content in the range 0–4 at.%, no silicon containing compound was detected by XRD before air oxidation and only the TiN phase was evidenced. The mean grain size estimated from the full width at half maximum of the TiN (111) diffraction peak was close to 10 nm. As commonly reported for Ti–Si–N films, the hardness showed a maximum at 51 GPa versus the Si content. After oxidation of the TiN film, XRD and micro-Raman analyses revealed the occurrence of…
Photocatalytic Degradation of 4-nitrophenol in aqueous suspension by using polycristalline TiO2 samples impregnated with a Cu(II)-phthalocyanine
2002
In this paper, the preparation of polycrystalline TiO2 samples impregnated with a modified Cu(II)-phthalocyanine (TiO2–CuPc) is reported along with an investigation on the photocatalytic behavior of this system compared with bare TiO2 (both in the anatase and rutile form) and with TiO2 samples impregnated with not functionalized commercial phthalocyanine (TiO2–CuPc) or with metal free phthalocyanine (TiO2–Pc). The photocatalytic degradation of 4-nitrophenol (4-NP) was studied as a probe reaction. The presence of modified CuPc showed to be beneficial only for TiO2 (anatase) while the commercial not functionalized CuPc also slightly for both TiO2 (anatase) and TiO2 (rutile). The metal free Pc…