Search results for "Oxide"
showing 10 items of 6424 documents
Growth of beryllium oxide nano-structures during thermal treatment of neutron irradiated beryllium
2015
Beryllium oxide nano-structures grown during high temperature oxidation of neutron irradiated beryllium has been investigated. Oxidation of non - irradiated and neutron irradiated beryllium was performed in differential thermal analyzer in an atmosphere of air and its mixture with helium at temperatures up to 1050°C. Structure of beryllium and its oxide was studied by the means of scanning electron microscopy. The growth of beryllium oxide nano-structures – “labyrinth type” layers and nano-rods on the inner surfaces of neutron irradiated beryllium were observed by means of Scanning Electron Microscopy. The size of the rods was 10-100 nm in diameter and up to few micrometers in length. There…
Surface Morphology of Single and Multi-Layer Silicon Nitride Dielectric Nano-Coatings on Silicon Dioxide and Polycrystalline Silicon
2019
Silicon nitride (Si3N4) in a form of single and multi-layer nanofilms is proposed to be used as a dielectric layer in nanocapacitors for operation in harsh environmental conditions. Characterization of surface morphology, roughness and chemical bonds of the Si3N4 coatings has an important role in production process as the surface morphology affects the contact surface with other components of the produced device. Si3N4 was synthesized by using low pressure chemical vapour deposition method and depositing single and multi-layer (3 – 5 layers) nanofilms on SiO2 and polycrystalline silicon (PolySi). The total thickness of the synthesized nanofilms was 20 – 60 nm. Surface morphology was investi…
Augmentation of weld penetration by flux assisted TIG welding and its distinct variants for oxygen free copper
2021
Abstract A comparative study to investigate the influences of single component fluxes on the depth-to-width ratio (DWR) of oxygen free copper was carried out with novel variants of tungsten inert gas (TIG) welding namely Activated TIG (A-TIG), Flux Bounded TIG (FB-TIG) and Flux Zoned TIG (FB-TIG) processes. The experiments to identify the fluxes delivering the higher DWRs in A-TIG welding among thirteen distinct fluxes were followed by the trials with FB-TIG and FZ-TIG employing those identified DWR fluxes. The fluxes which outperformed with all the techniques were MoO3 & MgO. Reversed Marangoni and arc constriction mechanisms were perceived to be opt for such an increase in DWR. Metallurgi…
Wo3 and ionic liquids: A synergic pair for pollutant gas sensing and desulfurization
2020
This review deals with the notable results obtained by the synergy between ionic liquids (ILs) and WO3 in the field of pollutant gas sensing and sulfur removal pretreatment of fuels. Starting from the known characteristics of tungsten trioxide as catalytic material, many authors have proposed the use of ionic liquids in order to both direct WO3 production towards controllable nanostructures (nanorods, nanospheres, etc.) and to modify the metal oxide structure (incorporating ILs) in order to increase the gas adsorption ability and, thus, the catalytic efficiency. Moreover, ionic liquids are able to highly disperse WO3 in composites, thus enhancing the contact surface and the catalytic abilit…
Structural characterization and optical constants of p-toluene sulfonic acid doped polyaniline and its composites of chitosan and reduced graphene-ox…
2020
Para-Toluene sulfonic acid doped polyaniline (PANI), PANI/chitosan composites, PANI/reduced graphene-oxide composites and a ternary composite comprising of PANI, chitosan and reduced graphene-oxide have synthesised via oxidative polymerisation of aniline by Ammonium peroxydisulfate (APS). FTIR, XRD, FESEM and UV-VIS techniques were performed for the confirmation of the successful synthesis. The fundamental optical parameters such as, complex refractive index, complex dielectric constants and optical conductivity of the PANI and the composites were investigated in the UV-VIS-NIR range. The results show a clear dependence on the constituent component such as sulphur as well as the absorbance …
Leaching characteristics of Sc-enriched, Fe-depleted acidic slags
2022
Scandium is currently classified as a critical raw material for the European Union, and several research projects focus on the search for new sources to supply to its expected increasing demand. The Kiviniemi mafic intrusion in Finland is a potential primary source for Sc; at Kiviniemi, Sc occurs mainly within the lattices of ferrous silicates, clinopyroxene and amphibole. Some of the main challenges in leaching of Kiviniemi-type feed material are related to either the complexity of Fe and Ti separation from Sc-containing solutions or a possible gelation problem when leaching a material with a high SiO2 content. According to preliminary beneficiation tests, direct acid leaching of the Kivin…
Growth and Electrochemical Performance of Lead and Lead Oxide Nanowire Arrays as Electrodes for Lead-Acid Batteries
2013
n this work, we present the growth and electrochemical performance of nanostructured lead and lead oxide electrodes for lead-acid batteries. The electrodes were obtained by template electrodeposition in polycarbonate membranes, acting as template. Electrochemical tests were conducted at constant current in 5M aqueous solution of sulphuric acid, after assembling nanostructured lead and lead oxide electrodes in a zero-gap configuration using a commercially available separator. The main advantages of these electrodes are the high specific energy and power density, and the wide surface area, about 70 times higher than the geometrical one. These features allowed high discharge rates, up to 20C. …
One-dimensional nanostructures of lead and lead dioxide for application in lead-acid batteries
2010
Fabrication of Pb and PbO2 nanostructures was undertaken with the aim of building low cost lead acid micro-batteries with high performance. Despite environmental problems and the relatively low specific energy in comparison with other galvanic generators, lead acid batteries are still extensively used in the field of energy accumulation, owing to a well known and reliable technology. Thus, it is of high technological interest to develop procedures for fabricating these devices at a micrometer scale or less. PbO2 nanowires were grown in different electrochemical deposition conditions leading to pure -PbO2, pure -PbO2 and mixture [1-2]. Several parameters, like temperature, electrolyte…
The Effect of Dopants on Sintering and Microstructure of Lead-free KNN Ceramics
2011
Lead-free potassium sodium niobate (K0.5Na0.5)NbO3 (KNN) has been prepared via conventional ceramic processing method. The influence of 0.5 wt% - 1.5 wt% MnO2 and WO3 addition on the sintering, crystallographic structure, microstructure and dielectric properties of KNN has been investigated. Optimal sintering temperatures of KNN ceramics were observed to be in the narrow interval: 1090 °C - 1110 °C for MnO2 doped KNN; 1150 °C - 1170 °C for pure KNN and doped with WO3. XRD patterns showed that all the samples have single perovskite structure with monoclinic structure. Microstructure of ceramics was changed greatly by using dopants.http://dx.doi.org/10.5755/j01.ms.17.1.251
Electrochemical Oxidation of Hf-Nb Alloys as a Valuable Route to Prepare Mixed Oxides of Tailored Dielectric Properties
2018
Metal oxides with high dielectric constant are extensively studied in the frame of substituting SiO2 as gate dielectric in nanoelectronic devices. Here, high-k mixed HfO2/Nb2O5 oxides are prepared by a facile electrochemical route starting from sputtering-deposited Hf–Nb alloys with several compositions. Transmission electron microscopy, grazing incidence X-ray diffraction, and glow discharge optical emission spectroscopy are employed to study the oxide structures, disclosing a crystalline–amorphous transition of the electrochemically prepared oxides by increasing the Nb content. Photo-electrochemical measurements allow the observation of optical transitions ascribed to localized states ins…