Search results for "Oxide"
showing 10 items of 6424 documents
One-Dimensional TiO2-B Crystals Synthesised by Hydrothermal Process and Their Antibacterial Behaviour on Escherichia coli
2016
We have successfully synthesised one-dimensional single crystals of monoclinic phase titanium dioxide nanostructures (TiO2-B), prepared by a hydrothermal process. Morphological characterization was carried out by atomic force and scanning and transmission electron microscopy techniques. In order to study the crystalline structure, samples were calcined at 500°C in an air-filled chamber. X-ray diffraction results indicated that as-prepared samples presented diffraction patterns of hydrate hydrogen titanate and those calcined at 500°C exhibited the TiO2-B and anatase phases, confirmed by Raman spectroscopy. Scanning electron microscopy results showed that the one-dimensional nanostructures ha…
Preparation of Photocatalytic Nanostructured TiO<sub>2</sub> Thin Films
2008
Photoactive films consisting of pure anatase, brookite or rutile were deposited on glass slides by a dip coating process from water dispersions or solutions obtained by using TiCl4 as the precursor. The films were characterized by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The photocatalytic activity of the various samples was evaluated by using the photooxidation of 2-propanol in gas solid regime as probe reaction. Brookite and anatase films showed a good photoactivity degrading the substrate and the propanone produced during the reaction.
A comparative study of the photocatalytic activities of iron-titanium (IV) oxide photocatalysts prepared by various methods; spray pyrolysis, impregn…
1995
Abstract A series of iron/titanium oxide photocatalysts of varying Fe 3+ content have beenprepared by a number of different methods and subjected to controlled thermal treatment. Specimens have been characterised in terms of their crystalline structure and morphology, and indicate solid solutions containing both the anatase and rutile phases of TiO 2 , together with the formation of pseudo-brookite in some specimens. Intrinsic photo-activity measurements have been performed using a standard liquid-phase photocatalytic reaction. Results indicate that the photocatalytic activity of the specimens differs according to the method of preparation, and that all solids containing iron (III) species …
Preparation, Characterization, and Photoactivity of Polycrystalline Nanostructured TiO2 Catalysts.
2004
Various preparations of nanostructured TiO2 starting from Ti(iso-OC3H7)4 or TiCl4 are reported. The samples were characterized by X-ray diffractometry, specific surface area and porosity determinations, scanning and transmission electron microscopy, and diffuse reflectance spectroscopy. 4-Nitrophenol photodegradation in aqueous medium was employed as a probe reaction to test the photoactivity of the catalysts. The photoactivity of some samples derived from Ti(iso-OC3H7)4 was found comparable with that of commercial powders. Calcination after the hydrolysis process was necessary to achieve crystallization of the particles before using them as photocatalysts for the reaction studied. The samp…
Cr- and Sb-containing TiO 2 inorganic orange nano-pigments prepared by a relative long hydrocarbon chain polyol
2016
Abstract We report the preparation of a series of orange Cr- and Sb-containing TiO 2 nano-pigments by the polyol via using triethylenglycol (TEG). Poorly crystallized anatase nanopowders with nominal stoichiometric compositions Cr x Sb x Ti 1−2x O 2 , with 0 ≤ x ≤ 0.2, were obtained by heating at 180 °C a solution of antimony acetate, chromium acetylacetone and titanium butoxide in TEG. The transition temperature of the chromium- and antimonium-containing anatase nanoparticles into the rutile crystalline form occurred over the range of temperature between 500 and 650 °C, depending on the dopant amount. After annealing at 800 °C for short time the series of samples displaying the rutile stru…
Combined Adsorption/Photocatalytic dye removal by copper-titania-fly ash composite
2020
Abstract Achieving both photocatalytic efficiency and adsorption capacity is essential to produce a highly efficient photocatalyst. This study fabricated a new photocatalyst by combining copper (Cu) doped titanium dioxide (TiO2) with fly ash (FA). The photocatalysts were synthesized using mild acid (acid-FA/Cu/TiO2), base (base-FA/Cu/TiO2), and deionized water (rFA/Cu/TiO2) activated FA. EDX confirmed the inclusion of Cu in both Cu/TiO2 and FA/Cu/TiO2 composites. XRD analysis indicated the presence of the anatase form of TiO2 after Cu doping and incorporation into modified FA. All three FA/Cu/TiO2 composites demonstrated high absorption (UV and visible region) compared to their TiO2 and Cu/…
Effect of titanium dioxide crystalline structure on the photocatalytic production of hydrogen
2011
The effect of the crystalline phase of TiO 2 (anatase, rutile and brookite) on its photocatalytic activity in hydrogen production from methanol-water vapours has been investigated by testing a series of both home-made and commercial TiO 2 photocatalysts, either bare or surface-modified by deposition of a fixed amount, i.e. 1 wt%, of platinum as co-catalyst. For all of the TiO 2 samples the rate of hydrogen production increased by one order of magnitude upon Pt deposition, because of the ability of Pt to enhance the separation of photoproduced electron-hole pairs. Under irradiation in the 350-450 nm wavelength range, brookite and anatase showed similar photoactivities, both superior to that …
Nanostructured Pt–TiO2 composite thin films obtained by direct liquid injection metal organic chemical vapor deposition: Control of chemical state by…
2015
Abstract Nanostructured Pt–TiO 2 composite thin films were synthesized by direct liquid injection metal organic chemical vapor deposition process, using trimethyl(methylcyclopentadienyl)platinum and titanium isopropoxide as precursors. Surface and cross-sectional morphologies obtained by scanning electron microscopy and transmission electron microscopy evidenced the uniform distribution of platinum nanoparticles in the TiO 2 matrix. At higher Pt content, the X-ray diffraction analysis showed that the face-centered cubic phase of platinum appeared together with an anatase TiO 2 structure. In addition, as far as the platinum chemical state is concerned, the co-deposition of TiO 2 and Pt allow…
The effect of the surface disordered layer on the photoreactivity of titania nanoparticles
2017
It is well known that the surface of metal oxide catalysts presents, usually, non-crystalline species containing impurities and low coordinated cations, which are observed in HRTEM images as a disordered layer of amorphous phase. Despite of being these species more accessible and less stable than the crystalline catalysts components, they have been rarely considered when analysing the catalyst activity. In this work, we have studied the effect of a treatment with HCl solution at pH = 0 on the characteristics of the disordered layer in two commercial anatase TiO2 samples, using techniques such as TGA, 1H MAS-NMR and HRTEM, and by determining these sample photocatalytic activity for the 4-nit…
A study of the interaction between iron(III)oxide and titanium(IV)oxide at elevated temperatures
1991
Abstract The bulk interaction between iron(III) oxide and titanium(IV) oxide occurs at temperatures in excess of 773 K. Initially iron(III) ions dissolve in the titanium(IV) oxide structure to produce a substitutional solid solution. Magnetic evidence suggests that there is a solubility limit of iron(III) ions in the region of ca. 3 atom %. Significantly the phase transition from the anatase phase to the rutile phase is observed to occur approximately 200 K lower in the presence of iron than when it is absent. Further reaction between iron(III) oxide and the saturated solution in the rutile phase occurs at 1073 K with the formation of pseudo-brookite. Under high vacuum conditions the therma…