Search results for "PAPER"

showing 10 items of 2166 documents

Comparison of simultaneous saccharification and fermentation and separate hydrolysis and fermentation processes for butanol production from rice straw

2020

Abstract Rice straw (RS) is one of the lignocellulosic wastes with the highest global production. The main objective of this study was to maximise the butanol production by Clostridium beijerinckii DSM 6422 from RS pretreated by microwave-assisted hydrothermolysis. Two different fermentation strategies were compared: separate hydrolysis and fermentation (SHF, two-step process) and simultaneous saccharification and fermentation (SSF, one-step process). In parallel, the variables that significantly affected the butanol production were screened by using fractional factorial designs. Butanol concentration and productivity at 48 h were, respectively, 8% and 173% higher in SSF than in SHF. A one-…

Central composite designbiologyChemistry020209 energyGeneral Chemical EngineeringButanolOrganic ChemistryEnergy Engineering and Power TechnologyFractional factorial design02 engineering and technologybiology.organism_classificationPulp and paper industryHydrolysischemistry.chemical_compoundFuel TechnologyClostridium beijerinckii020401 chemical engineering0202 electrical engineering electronic engineering information engineeringYeast extractFermentationResponse surface methodology0204 chemical engineeringFuel
researchProduct

Static instability analysis for travelling membranes and plates interacting with axially moving ideal fluid

2010

The out-of-plane instability of a moving plate, travelling between two rollers with constant velocity, is studied, taking into account the mutual interaction between the buckled plate and the surrounding, axially flowing ideal fluid. Transverse displacement of the buckled plate (assumed cylindrical) is described by an integro-differential equation that includes the centrifugal force, the aerodynamic reaction of the external medium, the vertical projection of membrane tension, and the bending force. The aerodynamic reaction is found analytically as a functional of the displacement. To find the critical divergence velocity of the moving plate and its corresponding buckling mode, an eigenvalue…

Centrifugal forceaxially moving materialsaxial flowMechanical Engineeringideal fluidinstability analysisMechanicsBending of platesInstabilityAerodynamic forcePhysics::Fluid DynamicsClassical mechanicsBucklingReactionFSIpaper webbucklingAxial symmetryDisplacement (fluid)Mathematics
researchProduct

Role of pulp in flavor release and sensory perception in orange juice

2004

This work elucidates the role of suspended solids in sensorial perception and flavor release in orange juice. The coarsest pulp (insoluble particles with a diameter of2 microm) accounted for two major physicochemical effects in orange juice samples: it retained large amounts of aroma compounds, including terpenes and aldehydes, and modified the rheological properties of the juice matrix. These phenomena strongly affected the chemical composition of the vapor phase in the juice samples. On the other hand, orange juice cloud (finest insoluble particles with a diameter of2 microm) also showed a strong retention effect on ethyl butanoate or hexanal, probably due to the occurrence of molecular i…

Chemical Phenomena030309 nutrition & dieteticsSensationengineering.materialHexanalSensory analysisBeverages03 medical and health scienceschemistry.chemical_compoundMouthfeel0404 agricultural biotechnologyPULPE DE FRUITS[SDV.IDA]Life Sciences [q-bio]/Food engineeringFood scienceComputingMilieux_MISCELLANEOUSFlavorAromaOrange juice0303 health sciencesChromatographybiologyChemistry PhysicalPulp (paper)food and beverages04 agricultural and veterinary sciencesGeneral Chemistry[SDV.IDA] Life Sciences [q-bio]/Food engineeringbiology.organism_classification040401 food sciencechemistryFruitTasteOdorantsengineeringVolatilizationRheologyGeneral Agricultural and Biological SciencesCitrus × sinensisCitrus sinensis
researchProduct

Manufacturing Cellulosic Fibres for Making Paper: A Historical Perspective

2018

The manufacture of pulp and paper is an important branch of industry worldwide and is based on complex and multidisciplinary technology. The production and modification of cellulosic fibre, which created the foundation for this industrial sector, has had a rich and colourful history. It has gone through many eras and its development has been closely integrated with the growth of our fundamental knowledge of chemistry and other natural sciences. During the last two decades, modern pulp and paper technologies have undergone some significant developments, especially ones involving the creation of a wide range of new options for different feedstock materials. Nevertheless, the fundamental conce…

Chemical pulpingArchitectural engineeringEngineeringEconomic productionCellulosic ethanolbusiness.industrySecondary sector of the economyPapermakingbusiness
researchProduct

Dithionite bleaching of thermomechanical pulp: factors having effects on bleaching efficiency

2000

The efficiency of dithionite bleaching of Norway spruce (Picea abies) thermomechanical pulp was studied by applying various multivariate data analysis techniques to analytical data (temperature, pH, ion chromatographic and energy-dispersive X-ray fluorescence data). In addition, modeling the residual sulfur content of bleached pulp by means of diffuse reflectance UV-vis spectral data from laboratory-scale bleaching experiments was attempted. The results indicated that this lignin-preserving bleaching process could be evaluated by means of the analytical data using either PCR or PLS models. These models also indicated that wavelengths below 400 nm should not be used in measuring the pulp bri…

ChemistryApplied MathematicsPulp (paper)Ion chromatographyOrthogonal signal correctionAnalytical chemistryengineering.materialDithioniteAnalytical Chemistrychemistry.chemical_compoundengineeringSulfur contentDiffuse reflectionSpectral dataJournal of Chemometrics
researchProduct

Catalytic treatment of rapeseed straw for enhanced production of furfural and glucose for bioethanol production

2021

Abstract Ethanol produced from renewable biomass, such as lignocellulosic feedstock, is one of the most promising future biofuels. In this paper, rapeseed straw was tested as an abundant and cost-effective renewable resource material for the production of cellulosic glucose. Pre-treatment of this material is an important step to improve the efficiency of subsequent cellulose hydrolysis. In this study, we used two pre-treatment methods – hydrothermochemical and ultrasound. Studies have shown that, in the initial hydrothermal pre-treatment of rapeseed straw, Al2(SO4)3 may be used as an efficient catalyst, at least in procedures for obtaining glucose. An increase in the amount of this catalyst…

ChemistryBioengineeringStrawRaw materialPulp and paper industryFurfuralApplied Microbiology and BiotechnologyBiochemistryHydrolysischemistry.chemical_compoundCellulosic ethanolBiofuelEnzymatic hydrolysisRenewable resourceProcess Biochemistry
researchProduct

Anaerobic removal of 1-methoxy-2-propanol under ambient temperature in an EGSB reactor

2015

Two laboratory-scale expanded granular sludge bed (EGSB) reactors were operated at 18 and 25 °C, respectively, for the treatment of synthetic wastewater composed of ethanol and 1-methoxy-2-propanol (M2P) in a mass ratio of 4:1. Reactors were operated first with continuous wastewater supply and after with discontinuous substrate supply (5 days a week, 16 h a day) to simulate shift working conditions. Under continuous wastewater supply chemical oxygen demand (COD), removal efficiency higher than 95 % was achieved at the end of the trial applying organic loading rates (OLR) of 29 and 43 kg COD m(-3) day(-1) at 18 and 25 °C; thus, corresponding to M2P OLR of 6.4 and 9.3 kg COD m(-3) day(-1), re…

ChemistryChemical oxygen demandEnvironmental engineeringSubstrate (chemistry)BioengineeringPortable water purificationGeneral MedicineQuímicaWastewaterPulp and paper industryMethaneWater PurificationPropanolchemistry.chemical_compoundBioreactorsWastewaterPropylene GlycolsBioreactorSewage treatmentAnaerobiosisBiotechnology
researchProduct

2-[(1-Methyl-1H-pyrrol-2-yl)carbonyl-meth-yl]isoindoline-1,3-dione.

2009

The asymmetric unit of the title compound, C15H12N2O3, contains two almost identical molecules forming an nearly C2-symmetric dimeric pattern. The dihedral angles between the pyrrole ring and the phthalimide unit are 82.95 (8) and 86.57 (8)° for the two molecules. Within such a dimer, the phthalimide units of the two molecules form a dihedral angle of 1.5 (5)°.

ChemistryDimerGeneral ChemistryMeth-IsoindolineDihedral angleCondensed Matter PhysicsBioinformaticsRing (chemistry)Medicinal chemistryOrganic Paperslcsh:ChemistryPhthalimidechemistry.chemical_compoundlcsh:QD1-999General Materials SciencePyrroleActa crystallographica. Section E, Structure reports online
researchProduct

6-Amino-1-benzyl-4-(4-chloro-phen-yl)-3-(4-pyrid-yl)-1,4-dihydro-pyrano[2,3-c]pyrazole-5-carbonitrile.

2008

The crystal structure of the title compound, C25H18ClN5O, was determined in the course of our studies on the synthesis of 1,4-dihydropyrano[2,3-c]pyrazole as an inhibitor of the p38 mitogen-activated protein kinase (MAPK). The compound was prepared via a base-catalysed synthesis from 1-benzyl-3-(4-pyridyl)-1H-pyrazol-5(4H)-one with p-chloroaldehyde and malononitrile. The crystal data obtained were used to generate a three-dimensional pharmacophore model for in silico database screening. The phenyl ring is disordered over two positions, with site occupancy factors of 0.55 and 0.45. The dihedral angles between the 1,4-dihydropyrano[2,3-c]pyrazole unit and the chlorophenyl and pyridine rings a…

ChemistryGeneral ChemistryCrystal structureDihedral anglePyrazoleCondensed Matter PhysicsRing (chemistry)BioinformaticsMedicinal chemistryOrganic Paperslcsh:Chemistrychemistry.chemical_compoundlcsh:QD1-999Crystal dataPyridineGeneral Materials SciencePharmacophoreMalononitrileActa crystallographica. Section E, Structure reports online
researchProduct

Transportation of complexing agents released by pulp and paper industry: A Finnish lake case

1996

Complexing agents (EDTA, DTPA) are used to bind metal ions in pulp and paper industry. Their role will increase significantly when the total chlorine free (TCF) processes will be applied to a larger extent. EDTA and DTPA were analysed in the waters from the southern part of the Lake Saimaa (SE Finland) influenced by the effluents of three pulp and paper mills. The samples were collected at different distances from the points of emission. The results of analyses suggest that EDTA can persist in lake water and is able to propagate for considerable distances, while DTPA can be detected only in the near surroundings of the site of release. Some EDTA was found even in the sampling points that we…

ChemistryHealth Toxicology and MutagenesisNatural waterMetal ions in aqueous solutionPulp (paper)Chlorine.freeengineeringEnvironmental Chemistryengineering.materialPulp and paper industryPollutionEffluentLake waterToxicological & Environmental Chemistry
researchProduct