Search results for "PAPER"

showing 10 items of 2166 documents

Effect of additives on process stability of mesophilic anaerobic monodigestion of pig slaughterhouse waste

2012

The effect of two additives on anaerobic monodigestion of pig slaughterhouse waste was studied in three laboratory scale continuously stirred tank reactors (CSTRs) operated for 242-284 days at 35°C. A higher organic loading rate (OLR), namely 2.25 kg volatile solids (VS)/m(3)d with a hydraulic retention time (HRT) of 30 d was feasible with an additive containing Fe, HCl and trace elements while an OLR of 1.5 kg VS/m(3)d (HRT 30 d) led to instabilities in CSTR with an additive consisting of Fe and HCl and in CSTR without additives. Methane yields of ca. 700 dm(3) CH(4)/kg VS(fed) were obtained in all reactors under stable conditions. Both additives decreased H(2)S concentration of the biogas…

Environmental EngineeringHydraulic retention timeIronSus scrofata1172Continuous stirred-tank reactorBioengineeringMethanechemistry.chemical_compoundBioreactorsBiogasAnimalsAnaerobiosisWaste Management and Disposalta218Biological Oxygen Demand AnalysisWaste ProductsWaste managementRenewable Energy Sustainability and the EnvironmentTemperatureGeneral MedicineHydrogen-Ion ConcentrationFatty Acids VolatilePulp and paper industryAnaerobic digestionBiodegradation EnvironmentalchemistryBiofuelBiofuelsHydrochloric AcidMethaneAnaerobic exerciseAbattoirsBiotechnologyMesophileBioresource Technology
researchProduct

Wastewater treatment and reclamation : A review of pulp and paper industry practices and opportunities

2016

The pulp and paper (P&P) industry worldwide has achieved substantial progress in treating both process water and wastewater, thus limiting the discharge of pollutants to receiving waters. This review covers a variety of wastewater treatment methods, which provide P&P companies with cost-effective ways to limit the release of biological or chemical oxygen demand, toxicity, solids, color, and other indicators of pollutant load. Conventional wastewater treatment systems, often comprising primary clarification followed by activated sludge processes, have been widely implemented in the P&P industry. Higher levels of pollutant removal can be achieved by supplementary treatments, which…

Environmental EngineeringMaterials sciencelcsh:BiotechnologyACTIVATED-SLUDGE TREATMENTBioengineeringDISSOLVED-AIR FLOTATIONWastewater treatment02 engineering and technology010501 environmental sciencesWHITE-ROT FUNGI01 natural sciencesMILL EFFLUENT TREATMENTCHLORINATED ORGANIC-COMPOUNDS12. Responsible consumptionLand reclamationlcsh:TP248.13-248.65Bioreactoractivated sludgeadvanced oxidationMembrane technologiesWaste Management and DisposalEffluent0105 earth and related environmental sciencesmembrane technologiesPollutantBLEACHED KRAFT MILLpulp and paper manufacturingPulp and paper manufacturingWaste managementChemical oxygen demand021001 nanoscience & nanotechnologyPulp and paper industry6. Clean waterClarificationwastewater treatmentActivated sludgeWastewaterCATALYTIC WET OXIDATIONActivated sludge13. Climate actionANAEROBIC MEMBRANE BIOREACTORSAdvanced oxidationGREENHOUSE-GAS EMISSIONclarificationSewage treatment0210 nano-technologyMOLECULAR-WEIGHT DISTRIBUTION
researchProduct

Sequential biological and photocatalysis based treatments for shipboard slop purification: A pilot plant investigation

2019

This study investigated the treatment of a shipboard slop containing commercial gasoline in a pilot plant scale consisting of a membrane biological reactor (MBR) and photocatalytic reactor (PCR) acting in series. The MBR contributed for approximately 70% to the overall slop purification. More precisely, the biological process was able to remove approximately 40%, on average, of the organic pollution in the slop. Nevertheless, the membrane was capable to retain a large amount of organic molecules within the system, amounting for a further 30% of the influent total organic content removal. However, this affected the membrane fouling, thus resulting in the increase of the pore blocking mechani…

Environmental EngineeringMembrane permeabilityGeneral Chemical Engineering0211 other engineering and technologies02 engineering and technology010501 environmental sciences01 natural scienceslaw.inventionMBRPhotocatalysilawIntegrated AOPOxidizing agentEnvironmental ChemistrySlopSafety Risk Reliability and QualityFiltration0105 earth and related environmental sciencesTotal organic carbon021110 strategic defence & security studiesFoulingChemistryMembrane foulingPulp and paper industryMembranePilot plantSettore CHIM/07 - Fondamenti Chimici Delle TecnologieSaline wastewaterProcess Safety and Environmental Protection
researchProduct

Analysis of pharmaceutical biodegradation of WWTP sludge using composting and identification of certain microorganisms involved in the process.

2018

Pharmaceuticals (PhCs) are organic contaminants that have been detected in wastewater, surface water, and soils throughout the world. The presence of 10 commonly used PhCs in Spain (azithromycin, benzylpenicillin, citalopram, fluconazole, fluoxetine, ibuprofen, irbesartan, olanzapine, telmisartan, and venlafaxine) was analysed at four wastewater treatment plants, and the changes in their concentrations during treatment were assessed. Although certain some PhCs were degraded in the treated water, their presence in sewage sludge increased in all cases. The sewage sludge was composted using rice straw to degrade the PhCs, and the composting efficiency was modified by changes in the relative C/…

Environmental EngineeringMicroorganism0208 environmental biotechnology02 engineering and technology010501 environmental sciences01 natural sciencesBenzylpenicillinWaste Disposal FluidSoilmedicineEnvironmental ChemistryWaste Management and Disposal0105 earth and related environmental sciencesSewageChemistryCompostingBiodegradationContaminationPulp and paper industryPollution020801 environmental engineeringBiodegradation EnvironmentalWastewaterSpainSoil waterSewage treatmentSludgemedicine.drugThe Science of the total environment
researchProduct

2018

Reactivity is an important parameter when considering the chemical modification or dissolution of cellulose. Different pretreatment methods affect cellulose reactivity by decreasing its degree of polymerization (DP) and crystallinity. In this study, the molar mass of cellulose was decreased via enzymatic pretreatment. Three commercial endoglucanase-rich products were tested. The target was to reduce the viscosity of the pulp to below 200 mL/g and, thus, increase the reactivity of the cellulose. For comparison, cellulose was also pretreated with ozone, and the effects of each pretreatment method on crystallinity and monosaccharide composition of the resulting pulps were investigated. Both en…

Environmental EngineeringMolar massPulp (paper)Chemical modificationBioengineeringengineering.materialchemistry.chemical_compoundHydrolysisCrystallinitychemistryengineeringReactivity (chemistry)CelluloseDerivatizationWaste Management and DisposalNuclear chemistryBioResources
researchProduct

New silica based adsorbent material from rice straw and its in-flow application to nitrate reduction in waters: Process sustainability and scale-up p…

2021

Abstract This paper shows a particular example to move to a sustainable circular economical process from valorization of rice straw ashes by developing a green synthesis for obtaining a useful sub-product. This strategy can palliate negative effects of the agriculture waste practices on the environment and also the obtained silica reduced nitrate content in waters. It is demonstrated that the silica synthesis developed at lab was scalable more than a hundred times with good results. Adsorption studies of nitrate in standards and real well waters at lab scale and scaling-up provided similar results. Adsorption values near to 15 mg/g for nitrate standards and 8.5 mg/g for well water were obta…

Environmental EngineeringNitratesLab scaleFlow (psychology)OryzaRice strawPulp and paper industrySilicon DioxidePollutionWater Purificationchemistry.chemical_compoundKineticsAdsorptionNitratechemistryScientific methodSCALE-UPSustainabilityEnvironmental ChemistryEnvironmental scienceAdsorptionWaste Management and DisposalWater Pollutants ChemicalThe Science of the total environment
researchProduct

Composting of bio-waste, aerobic and anaerobic sludges – Effect of feedstock on the process and quality of compost

2011

In-vessel composting of three stocks with originally different degree of organic matter degradation was conducted for: (1) kitchen source-separated bio-waste (BW), (2) aerobic (AS) as well as (3) anaerobic sludges (AnS) from municipal wastewater treatment plant. Composting experiment lasted over a year. The highest activity of the process was in the BW compost. It was implied by the highest temperature, CO(2) release, ammonification and nitrification, intensive accumulation and removal of low-weight carboxylic acids (water- and NaOH-extractable). Between the sludges higher mineralization and CO2 release was in AnS, while ammonification and nitrification were higher in AS compost; no signifi…

Environmental EngineeringNitrogenBioengineeringengineering.materialModels BiologicalLepidium sativumBacteria Anaerobicta219Computer SimulationOrganic matterWaste Management and DisposalNitrogen cycleta218Soil Microbiologychemistry.chemical_classificationSewageRenewable Energy Sustainability and the EnvironmentCompostGeneral MedicineMineralization (soil science)Pulp and paper industryRefuse DisposalWastewaterchemistryAgronomyengineeringPhytotoxicityNitrificationAerobieBioresource Technology
researchProduct

The influence of solid retention time on IFAS-MBR systems: Assessment of nitrous oxide emission

2017

The aim of the present study was to investigate the nitrous oxide (N2O) emissions from a moving bed based Integrated Fixed Film Activated Sludge (IFAS) - membrane bioreactor (MBR) pilot plant, designed according to the University of Cape Town (UCT) layout. The experimental campaign had a duration of 110 days and was characterized by three different sludge retention time (SRT) values (∞, 30 d and 15 d). Results highlighted that N2O concentrations decreased when the biofilm concentrations increased within the aerobic reactor. Results have shown an increase of N2O with the decrease of SRT. Specifically, an increase of N2O-N emission factor occurred with the decrease of the SRT (0.13%, 0.21% …

Environmental EngineeringNitrogenIFAS-MBR0208 environmental biotechnologyActivated sludge; Biofilm; Emission factor; IFAS-MBR; Nitrous oxide; UCT; Environmental Engineering; Waste Management and Disposal; Management Monitoring Policy and LawSettore AGR/13 - Chimica AgrariaNitrous Oxidechemistry.chemical_element02 engineering and technology010501 environmental sciencesManagement Monitoring Policy and LawMembrane bioreactorEmission factor01 natural scienceschemistry.chemical_compoundBioreactorsWaste Management and Disposal0105 earth and related environmental sciencesSewageSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleBiofilmEnvironmental engineeringGeneral MedicineNitrous oxidePulp and paper industryNitrogenAnoxic waters020801 environmental engineeringActivated sludgePilot plantWater bodychemistryActivated sludgeBiofilmsUCTRetention time
researchProduct

The distribution of phthalate esters in indoor dust of Palermo (Italy).

2013

In this work, phthalic acid esters (PAEs): dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate, and di-n-octyl phthalate in indoor dust (used as passive sampler) were investigated. The settled dust samples were collected from thirteen indoor environments from Palermo city. A fast and simple method using Soxhlet and GC–MS analysis has been optimized to identify and quantify the phthalates. Total phthalates concentrations in indoor dusts ranged from 269 to 4,831 mg/kg d.w. (d.w. = dry weight). The data show a linear correlation between total PAEs concentration and a single compound content, with the exclusion of the two …

Environmental EngineeringPhthalic AcidsIndoor dust Phthalates esters GC–MS Contaminants ItalyDiethyl phthalateGas Chromatography-Mass SpectrometrySettore CHIM/12 - Chimica Dell'Ambiente E Dei Beni Culturalichemistry.chemical_compoundGeochemistry and PetrologyEnvironmental Science(all)Benzyl butyl phthalateContaminantsEnvironmental ChemistryGC–MSSettore CHIM/01 - Chimica AnaliticaPhthalates estersCitiesGeneral Environmental ScienceWater Science and TechnologyOriginal PaperAir PollutantsChemistryPhthalateDustEstersGeneral MedicineContaminationPhthalic acidIndoor dustItalyEnvironmental chemistryAir Pollution IndoorLinear correlationGas chromatography–mass spectrometryDimethyl phthalateIndoor dustPhthalates estersGC–MSContaminantsItalyEnvironmental Monitoring
researchProduct

Reliable method for assessing the COD mass balance of a submerged anaerobic membrane bioreactor (SAMBR) treating sulphate-rich municipal wastewater

2012

The anaerobic treatment of sulphate-rich wastewater causes sulphate reducing bacteria (SRB) and methanogenic archaea (MA) to compete for the available substrate. The outcome is lower methane yield coefficient and, therefore, a reduction in the energy recovery potential of the anaerobic treatment. Moreover, in order to assess the overall chemical oxygen demand (COD) balance, it is necessary to determine how much dissolved CH4 is lost in the effluent. The aim of this study is to develop a detailed and reliable method for assessing the COD mass balance and, thereby, to establish a more precise methane yield coefficient for anaerobic systems treating sulphate-rich wastewaters. A submerged anaer…

Environmental EngineeringPilot ProjectsWaste Disposal FluidWater PurificationBioreactorsBiogasBioreactorAnaerobiosisCitiesSulfate-reducing bacteriaEffluentIn Situ Hybridization FluorescenceWater Science and TechnologyBiological Oxygen Demand AnalysisBacteriaSewageSulfatesChemistryChemical oxygen demandEnvironmental engineeringReproducibility of ResultsMembranes ArtificialPulp and paper industryAnaerobic digestionWaste treatmentWastewaterSpainBiofuelsMethaneOxidation-ReductionWater Science and Technology
researchProduct