Search results for "PARTIAL OXIDATION"
showing 10 items of 68 documents
Photocatalytic oxidation of gaseous toluene on polycrystalline TiO2: FT-IR investigation of surface reactivity of different types of catalysts
2000
Commercial TiO 2 Merck and TiO 2 Degussa P25 powders were employed as the catalysts for the photo-oxidation of toluene. By using TiO 2 Merck benzaldehyde was found in gas phase as the main product of the toluene partial oxidation. After an initial transient period, this catalyst exhibited a high stability in the presence of water vapour in the gaseous mixture, whereas the photoproduction of benzaldehyde sharply decreases after removal of H 2 O from the feed IR spectra of the used catalyst revealed that in the absence of water vapour benzaldehyde is molecularly held on the catalyst surface. This feature was confirmed by co-adsorbing benzaldehyde and water on the fresh catalyst. By contrast, …
VOC's abatement: Photocatalytic oxidation of toluene in vapour phase on anatase TiO2 catalyst
1997
Publisher Summary The photocatalytic oxidation of toluene in the presence of water was performed in the gas–solid regime at room temperature by using TiO2. It has been found that the presence of water was beneficial to achieve the almost complete photo-oxidation of toluene to CO2 and H2O, in fact, only very small amounts of benzaldehyde vapor that is the main product of toluene partial oxidation, were detected. Volatile organic compounds, VOC's, are an important class of air pollutants usually found in the atmosphere of all urban and industrial areas. Toluene is one of these compounds, and because of its noxious nature several strategies have been identified to reduce its presence in indoor…
Selective photocatalytic oxidation of 5-hydroxymethyl-2-furfural in aqueous suspension of polymeric carbon nitride and its adduct with H2O2 in a sola…
2018
Abstract This work reports a study on the reactivity of polymeric carbon nitride (PCN) and PCN-H2O2 adduct samples for sunlight photocatalytic selective oxidation reactions. The characterization of these materials was reported in a previous paper where the reactivity towards the partial oxidation of 5-hydroxymethylfurfural (HMF) was studied by using two different laboratory scale photoreactors; one irradiated by UV lamps and the other one by natural sunlight. In the present study it has been confirmed the effectiveness of these C3N4 based materials for the selective partial oxidation of HMF to FDC (2,5-furandicarboxaldehyde) in aqueous medium in a pilot plant photoreactor irradiated by natu…
"Partial oxidation of methane and methanol on FeOx-, MoOx- and FeMoOx -SiO2 catalysts prepared by sol-gel method: a comparative study"
2020
[EN] FeOx-, MoOx and FeMoOx-SiO2 materials prepared by a sol-gel procedure have been evaluated as catalysts for the partial oxidation of methane and methanol. The effect of decreasing the pH of the synthesis gel on the chemical nature of FeOx and MoOx species has been investigated. Characterization results show that low pH improves the dispersion of metal oxide species present in SiO2 matrix. For FeOx/SiO2 materials, the presence of dispersed FeOx species (rather than bulk Fe2O3) improves the selectivity to formaldehyde in the partial oxidation of methane and methanol. For FeMoOx/SiOx catalysts, dispersed species favor the selectivity to formaldehyde only for methane oxidation. In contrast,…
ZrO2 Acting as a Redox Catalyst
2016
Surface defects are discussed and reviewed with regards to the use of ZrO2 in applications involving interactions with CO, H2, CH4, CO2, water and hydrocarbons. Studies of catalytic partial oxidation of methane reveal that part of the surface lattice oxygen in terraces can be removed by methane at high temperatures (e.g. 900 °C). The reaction proceeds via a surface confined redox mechanism. The studies presented here also highlight that defects play a decisive role in the water–gas-shift reaction, since the reaction is likely carried out via OH groups present at defect sites, which are regenerated by dissociating water. Hydroxyl chemistry on ZrO2 is briefly reviewed related to the studies p…
Functionalized Fe3O4 nanoparticles: influence of ligand addition sequence and pH during their continuous hydrothermal synthesis
2015
In this study we report various new efficient ways to synthesize and modify in situ magnetite (Fe3O4) iron oxide nanoparticles (NPs). Thanks to an apparatus especially developed for this new method of grafting, the NPs have been synthesized and functionalized by 3,4-dihydroxyhydrocinnamic acid (DHCA) or 3,4-dihydroxy-L-phenylalanine (LDOPA) in one step and under hydrothermal conditions using varying concentration ratios ([organic molecules]/[ferrous and ferric ions]). The organic molecules were added before or after the NP synthesis. The addition of these organic molecules modifies the structure, the morphology, the oxidation degree and the growth of the crystallites. Adding the organic mol…
Influence of gel composition in the synthesis of MoVTeNb catalysts over their catalytic performance in partial propane and propylene oxidation
2010
[EN] MoVTeNb mixed oxides catalysts have been prepared by a slurry method with different molar compositions (Mo/Te ratio from 2 to 6 and Nb/(V + Nb) ratio from 0 to 0.7) in the synthesis gel leading to different crystalline phases distribution and catalytic behaviour in the partial oxidation of both propane and propylene to acrylic acid. Chemical analysis indicates that the composition of samples before and after the heat-treatment changes, especially the Te-content, since a significant amount of Te is lost during the heat-treatment step when the amount of oxalate (from niobium oxalate) increases in the synthesis gel. Thus, the nature of the crystalline phases and the catalytic performance …
Visible-light driven oxidation of gaseous aliphatic alcohols to the corresponding carbonyls via TiO2 sensitized by a perylene derivative
2013
Sensitized P25 TiO2 was prepared by wet impregnation with a home-prepared perylene dye, i.e., N,N?-bis(2-(1- piperazino)ethyl)-3,4,9,10-perylene-tetracarboxylic acid diimide dichloride (PZPER). Energy levels of PZPER were found to be compatible with those of TiO2 allowing fast electron transfer. The obtained catalyst has been characterized and used in the gas-phase partial oxidation of aliphatic primary and secondary alcohols, i.e., methanol, ethanol, and 2- propanol. The reaction was carried out under cut-off (?> 400 nm) simulated solar radiation in O2 atmosphere. The perylene derivative allowed a good absorbance of visible radiation thanks to its low optical energy gap (2.6 eV) which was …
Gas-phase selective oxidation of chloro- and methoxy-substituted toluenes on TiO2–Sepiolite supported vanadium oxides
2009
Abstract Catalytic behaviour of vanadium oxide systems (5–20 wt.% V2O5) supported on TiO2–Sepiolite (with titania loading around the theoretical monolayer, 12 wt.%, 12Ti–Sep) and, as reference, on Sepiolite calcined (Sepc) in the p-substituted toluene derivatives selective oxidation was studied. In all the catalysts studied p-chloro (p-ClBA) and p-methoxybenzaldehyde (p-MeOBA) were the main products. The yields to benzaldehydes obtained with %V/12Ti–Sep are comparable with some of those reported in the literature under similar kinetically controlled experimental conditions (Sp-ClBA = 70% and X = 19% were obtained at 653 K on 20 V/12Ti–Sep). The activity for benzaldehyde derivatives formatio…
Effect of the cerium loading on the HMS structure. Preparation, characterization and catalytic properties
2013
Abstract Ce–HMS mesoporous materials were prepared by incipient wetness method starting from HMS synthesized in acid condition. The effect of cerium quantity, in the range of Ce/Si atomic ratio 0.02–0.3, on its structure and properties was investigated. Results showed that the HMS hexagonal structure was maintained after the cerium adding. Furthermore, the surface area and the pore volume were reduced. The presence of the cerianite nanoparticles located within the HMS channels up to 0.05, thus covering the HMS surface at higher Ce/Si atomic ratio, was observed. The catalytic performances of the materials were tested in ethanol partial oxidation reaction.