Search results for "PEDOT:PSS"

UHF RFID humidity sensor tag based on hygroscopic polymeric load

2012

Passive UHF RFID tags, beside item labelling, are also able to exploit capability of sensing the physical state of the tagged object as well as of the surrounding environment. Here a family of polymer-doped tags are proposed and fully characterized for the detection of ambient humidity. A sensitive chemical species based on PEDOT: PSS is used to dope a properly shaped slot carved into a folded-like patch tag. The sensing capabilities of the radio-sensor are investigated by means of measurements for different quantities of sensitive material and in cyclic exposures. The device could have interesting application in the assessment of the air quality in living and controlled rooms, in the monit…

Efficient Monolithic Perovskite/Perovskite Tandem Solar Cells

2016

Thin-film solar cells suffer from various types of recombination, of which leakage current usually dominates at lower voltages. Herein, we demonstrate first a three-order reduction of the shunt loss mechanism in planar methylammonium lead iodide perovskite solar cells by replacing the commonly used hole transport layer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with a better hole-selective polyarylamine. As a result, these cells exhibit superior operation under reduced light conditions, which we demonstrate for the extreme case of moonlight irradiance, at which open-circuit voltages of 530 mV can still be obtained. By the shunt removal we also observe the VOC to dro…

Polymer-doped UHF RFID tag for wireless-sensing of humidity

2012

Passive UHF RFID tags, beside item labelling, are also able to exploit capability of sensing the physical state of the tagged object as well as of the surrounding environment. Here a family of polymer-doped tags are proposed and fully characterized for the detection of ambient humidity. A sensitive chemical species based on PEDOT:PSS is used to dope a properly shaped slot carved into a folded-like patch tag. The communication and sensing capabilities of the radio-sensor are investigated by means of simulation and measurements showing how to control and balance above opposite requirements by dosing the quantity of sensitive material. The device could have interesting application in the asses…

Hybrid LEDs based on ZnO nanowire structures

2017

Abstract This paper summarized the research, development, and state of the art of hybrid ZnO nanowire LEDs, in which electroluminescence is generated at the junction between n-type doped ZnO nanowire structures and specific p-type doped polymers (in particular PEDOT, PEDOT:PSS, or PFO). Different device architectures will be reviewed and discussed with a particular emphasis on the electronic transport through the hybrid structures and the microscopic processes of light emission. Finally, a gas-phase deposition technique for conductive polymers will be presented which might help improve the performance of hybrid ZnO nanowire LEDs in the future.

Enhanced thermoelectric performance of PEDOT with different counter-ions optimized by chemical reduction

2014

This work reports on the synthesis of the intrinsically conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with several counter-ions, ClO4, PF6 and bis(trifluoromethylsulfonyl)imide (BTFMSI), by electro-polymerization and its thermoelectric properties. We show that, depending on the counter-ion size, the thermoelectric efficiency of PEDOT can be increased up to two orders of magnitude. A further chemical reduction with hydrazine optimizes the power factor (PF). By changing the counter-ions, we were able to increase the electrical conductivity (σ) of PEDOT by a factor of three, while the Seebeck coefficient remains at the same order of magnitude in the three polymers. The best…

2016

The organic electrochemical transistor (OECT), capable of transducing small ionic fluxes into electronic signals in an aqueous environment, is an ideal device to utilize in bioelectronic applications. Currently, most OECTs are fabricated with commercially available conducting poly(3,4-ethylenedioxythiophene) (PEDOT)-based suspensions and are therefore operated in depletion mode. Here, we present a series of semiconducting polymers designed to elucidate important structure–property guidelines required for accumulation mode OECT operation. We discuss key aspects relating to OECT performance such as ion and hole transport, electrochromic properties, operational voltage, and stability. The demo…

Light emitting and electrical properties of pure amorphous thin films of organic compounds containing 2-tert-butyl-6-methyl-4H-pyran-4-ylidene

2013

Abstract Low molecular weight organic compounds which make thin films from organic solutions would be a great benefit in future organic light emitting systems. Two most important advantages should be mentioned. First – repeatability of synthesis of small molecules is better than of polymers. Second – wet casting methods can be applied. In this paper we present optical and opto-electrical properties of three glassy forming compounds containing 2-tert-butyl-6-methyl-4H-pyran-4-ylidene fragment as a backbone. They have the same N,N-dialkylamino electron donating group with attached bulky trityloxyethyl groups. The difference between these compounds is in an electron acceptor group. One has ind…

Quantifying the inverse spin-Hall effect in highly doped PEDOT:PSS

2020

The authors provide experimental results that show the onset of the Nernst effect, thermovoltages and an inverse spin-Hall effect in the polymer PEDOT:PSS. Specifically, the observed inverse spin-Hall effect appears to be smaller than other measurements, but in better agreement with theoretical calculations.

Effect of conductivity of hole injection layer on the performance of a blue light emitting solution processable OLED

2005

The performance of blue emitting OLED devices, using a polyspiro as blue light emitting polymer, were studied as a function of the conductivity of a novel hybrid hole injection material. The hole injection material is based on a polyarylamine using a molecular magnet as oxidant. The charge density and the luminance of the devices changed considerably with increasing conductivity of the hole injection layer. The change in device performance can be attributed to a change from a hole limited device to a balanced charge carrier device and eventually to an electron limited device. The performance of the optimized device configuration is significantly improved with respect to a device making use …

Light-emitting thin films of glassy forming organic compounds containing 2-tert-butyl-6-methyl-4H-pyran-4-ylidene

2012

Low molecular mass organic compounds which make thin films from volatile organic solutions would be great benefit in future organic light emitting systems. Two most important advantages could be mentioned. First - the repetition of synthesis of small molecules is better than for polymers. Second - wet casting methods could be used. In this work we are presenting optical, electroluminescence and amplified spontaneous emission properties of four original glassy forming compounds containing 2-tert-butyl-6-methyl-4H-pyran-4-ylidene fragment as backbone of the molecule. They has the same N,N-dialkylamino electron donating group with incorporated bulky trityloxy ethyl groups. The difference of th…