Search results for "PEDOT"

PEDOT:Poly(1-vinyl-3-ethylimidazolium) dispersions as alternative materials for optoelectronic devices

2008

Efficient, Cyanine Dye Based Bilayer Solar Cells

2012

Simple bilayer solar cells, using commercially available cationic cyanine dyes as donors and evaporated C60 layer as an acceptor are prepared. Cyanine dyes with absorption maxima of 578, 615 and 697 nm having either perchlorate or hexafluorophosphate counter-ions are evaluated. The perchlorate dye leads to cells with S-shape current-voltage curves; only the dyes with the hexafluorophosphate counter-ions lead to efficient solar cells. When the wide bandgap dyes are employed, S-shape current-voltage curves are obtained when the conductive polymer PEDOT:PSS is used as hole transport layer. Substitution of PEDOT:PSS with MoO3 leads to cells with more rectangular current–voltage curves and high …

Hybrids composites of NCCO/PEDOT for thermoelectric applications

2017

Abstract Organic materials are becoming a realistic roadway to fabricate efficient thermoelectric devices using environmental friendly materials. Such requirements are actually fulfilled by thermoelectric generators operating by conducting polymers, but also by hybrid materials. The combination of organic + inorganic compounds may exhibit a high electrical conductivity and Seebeck coefficient as well as lower thermal conductivity in order to efficiently generate thermoelectric power. In these hybrid compounds, perovskite-type oxides are a suitable election for the inorganic part since they have a high Seebeck coefficient although their electrical conductivity is usually low. Blending them w…

Three dimensional PEDOT nanowires network

2016

Abstract A three dimensional (3D) structure of poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires have been prepared by electrochemical polymerization using 3D-alumina templates. The templates were synthesized by pulse anodization in an electrochemical bath. A 3D free standing network has been obtained after the template removal. The morphological analysis by electron microscopy shows the existence of a 3D PEDOT nanowires network whose nanowire diameter is around 20 nm for the vertical nanowires and 10 nm for the transversal connections. Electrical properties such as the I–V characteristics and the Seebeck coefficient were studied for the nanowires network. Also, the optical properties have…

Structural control of mixed ionic and electronic transport in conducting polymers

2016

Poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate), PEDOT:PSS, has been utilized for over two decades as a stable, solution-processable hole conductor. While its hole transport properties have been the subject of intense investigation, recent work has turned to PEDOT:PSS as a mixed ionic/electronic conductor in applications including bioelectronics, energy storage and management, and soft robotics. Conducting polymers can efficiently transport both holes and ions when sufficiently hydrated, however, little is known about the role of morphology on mixed conduction. Here, we show that bulk ionic and electronic mobilities are simultaneously affected by processing-induced change…

Influence of device geometry on sensor characteristics of planar organic electrochemical transistors.

2009

The response of PEDOT:PSS planar electrochemical transistors to H2O2 can be tuned by varying the ratio between the areas of the channel and the gate electrode. Devices with small gates show lower background signal and higher sensitivity. The detection range, on the other hand, is found to be rather independent of the gate/channel area ratio.

Light induced electropolymerization of poly(3,4-ethylenedioxythiophene) on niobium oxide

2010

Abstract The photoelectrochemical polymerization of poly(3,4-ethylenedioxythiophene), PEDOT, was successfully realized on anodic film grown to 50 V on magnetron sputtered niobium. Photocurrent Spectroscopy was employed to study the optical properties of Nb/Nb 2 O 5 /PEDOT/electrolyte interface in a large range of potential, and to get an estimate of the band gap and flat band potential of both the oxide and the polymer. Scanning Electron Microscopy was used to study the morphology of PEDOT. Both the optical and morphological features of the photoelectrochemically grown polymer were compared with those showed by PEDOT electropolymerized on gold conducting substrate.

All-Solid-State Ag+-ISE Based on [2.2.2]p,p,p-Cyclophane

2001

All-solid-state ion-selective electrodes (ISEs) based on two ionophores with similar structure, i.e., [2.2.2] p,p,p-cyclophane and [2.2.2]m,p,p-cyclophane, were prepared and investigated. The ion-selective membranes were composed of the corresponding ionophore (1 %), potassium tetrakis(4-chlorophenyl)borate (0.5 %), 2-nitrophenyl octyl ether (65–66 %), and PVC (33 %). The ion-selective membrane was placed on top of a layer of the conducting polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), working as ion-to-electron transducer. The resulting all-solid-state ISEs were conditioned in 0.01 M AgNO3 and investigated as Ag+-ISEs. The results show that [2.2.2] p,p,p-cyclophane is much more select…

Thermal sensor based on a polymer nanofilm

2016

In this work, we have developed a thermal sensor based on poly(3,4 ethylenedioxythiophene) (PEDOT) nanofilms as thermoelectric material. The PEDOT nanofilms have been synthesized by the electrochemical polymerization method. The thicknesses of the films were around 120 nm. The doping level of PEDOT was controlled by chemical reduction using hydrazine. The achieved Seebeck coeficient is 40 uV/K. A PEDOT nanofilm was integrated into an electronic circuit that amplifies the voltage originated from the Seebeck effect. The temperature increment produced by a fingerprint touching the film is enough to switch on a light emitting diode. Peer Reviewed

Development and analysis of the Soil Water Infiltration Global database

2018

27 Pags.- 11 Tabls.- 8 Figs. © Author(s) 2018. This work is distributed under the Creative Commons Attribution 4.0 License.