Search results for "PG"

Experimental Determination of Liquefied Petroleum Gas–Gasoline Mixtures Knock Resistance

2014

The results of previous experimental researches showed that great advantages can be achieved, both in terms of fuel consumption and pollutant emissions, in bifuel vehicles by means of the double-fuel combustion, i.e., the simultaneous combustion of gasoline and a gaseous fuel, such as liquefied petroleum gas (LPG) or natural gas (NG). The substantial increase in knock resistance pursued by adding LPG to gasoline, which allowed to maintain an overall stoichiometric proportion with air also at full load, is not documented in the scientific literature and induced the authors to perform a proper experimental campaign. The motor octane number (MON) of LPG–gasoline mixtures has been hence determi…

Definition of Seismic Vulnerability Maps for Civil Protection Systems: The Case of Lampedusa Island

2016

The opportunity to locate and quantify the major criticalities associated to natural catastrophic events on a territory allows to plan adequate strategies and interventions by civil protection bodies involved in local and international emergencies. Seismic risk depends, most of all, on the vulnerability of buildings belonging to the urban areas. For this reason, the definition, by a deep analysis of the territory, of instruments identifying and locating vulnerability, largely favours the activities of institutions appointed to safeguard the safety of citizens. This paper proposes a procedure for the definition of vulnerability maps in terms of vulnerability indexes and critical peak ground …

2013

Today, integration of supply networks (SNs) out of heterogeneous entities is quite challenging for industries. Individualized demands are getting continuously higher values in the global business and this fact forces traditional businesses for restructuring their organizations. In order to contribute to new performances in manufacturing networks, in this paper a collaborative approach is recommended out of modularity structure, cloud computing, and make-to-upgrade concept for improving flexibility as well as coordination of entities in networks. A cloud-based framework for inbound and outbound manufacturing is introduced for complying with the production of individualized products in the tu…

Smart plugs: A low cost solution for programmable control of domestic loads

2014

International audience; Balancing energy demand and production is becoming a more and more challenging task for energy utilities. This is due to a number of different reasons among which the larger penetration of renewable energies which are more difficult to predict and the meagre availability of financial resources to upgrade the existing power grid. While the traditional solution is to dynamically adapt energy production to follow the time-varying demand, a new trend is to drive the demand itself by means of Direct Load Control (DLC). In this paper we consider a scenario where DLC functionalities are deployed at a large set of small deferrable energy loads, like appliances of residential…

Hybrid moving bed biofilm reactors: an effective solution for upgrading a large wastewater treatment plant

2009

Over the last few years there has been a growing attention regarding the receiving water body quality state. As a matter of a fact, the Directive 91/271 of the European Union (EU) replaced the “emission standard” concept that fixes discharge limits depending on polluting emission characteristics, with the “stream standard” concept that fixes discharge limits for each polluting substance depending on self-depurative characteristics of the RWB. In this context, several WWTPs need to be upgraded in order to meet stricter effluent limits. The need of WWTP upgrading was also emphasized by the growing urbanization that have led, in most cases, to get overloaded WWTP due to an overcoming of the ma…

Hybrid moving bed biofilm reactors: a pilot plant experiment.

2008

The growing increment of the urbanization and on the other hand, the even more strict effluent limits imposed by the Water Framework Directive for the receiving water body quality state have lead to a need of upgrading several existing WWTP. With this respect HMBBR systems are an innovative solution since allow to upgrade existing high loaded WWTP without building new tanks. However, some uncertainties in their design, maintenance as well as performance have to be addressed due to their recent acquisition compared with well consolidated technologies such as activated sludge systems. In this light, a data gathering campaign on a HMBBR pilot plant has been performed. The aim was to detect the…

Calibration and simulation of two large wastewater treatment plants operated for nutrient removal

2004

Control and optimisation of plant processes has become a priority for WWTP managers. The calibration and verification of a mathematical model provides an important tool for the investigation of advanced control strategies that may assist in the design or optimization of WWTPs. This paper describes the calibration of the ASM2d model for two full scale biological nitrogen and phosphorus removal plants in order to characterize the biological process and to upgrade the plants' performance. Results from simulation showed a good correspondence with experimental data demonstrating that the model and the calibrated parameters were able to predict the behaviour of both WWTPs. Once the calibration an…

Latest Frontier Technology and Design of the ATLAS Calorimeter Trigger Board Dedicated to Jet Identification for the LHC Run 3

2016

To cope with the enhanced luminosity of the beam delivered by the Large Hadron Collider (LHC) in 2020, the “A Toroidal LHC ApparatuS” (ATLAS) experiment has planned a major upgrade. As part of this, the trigger at Level1 based on calorimeter data will be upgraded to exploit fine-granularity readout using a new system of Feature Extractors, which each use different physics objects for the trigger selection. The article focusses on the jet Feature EXtractor (jFEX) prototype, one of the three types of Feature Extractors. Up to 2 TB/s have to be processed to provide jet identification (including large area jets) and measurements of global variables within few hundred nanoseconds latency budget.…

Remote programming of network robots within the UJI Industrial Robotics Telelaboratory: FPGA vision and SNRP network protocol

2009

This paper presents the UJI Industrial Robotics Telelaboratory, which lets Ph.D. and Master’s degree students perform robotics and computer vision tele-experiments. By using this system, students are able to program experiments remotely via the Web, in order to combine the use of a field-programmable gate array (FPGA) to provide real-time vision processing, a conveyor belt, and a Motoman industrial manipulator. This paper introduces the novel SNRP protocol (i.e., Simple Network Robot Protocol), which permits the integration of network robots and sensors within an e-learning platform in a simple and reliable manner. As long as the students are able to interact remotely with a real robotic sc…

A portable instrument for the location and identification of defects generating PD

2011

A portable instrument based on an antenna probe and suitable for partial discharge detection, have been characterized through both laboratory and on-site experiments carried out on coils and stator windings of ac rotating machines. The antenna probe allows the capture of electromagnetic waves in a bandwidth of 0.1–100 MHz. Pulse signals and ac supply voltage reference are obtained by means of high-pass and low-pass filters, respectively, so avoiding the need of a direct connection with the objects under test. By this way, real-time phase resolved partial discharge patterns can be derived. Results of a comparison of the diagnostic information provided by PD patterns due to conducted and irra…