Search results for "PHOTO-OXIDATION"

Highly stable defective TiO2-x with tuned exposed facets induced by fluorine: Impact of surface and bulk properties on selective UV/visible alcohol p…

2020

Abstract Titanium dioxide samples were prepared in the presence of different amounts of fluorine via hydrothermal method. It has been found that the presence of fluoride influenced the physico-chemical properties of TiO2 in various ways as polymorphic form stability, surface hydroxylation, generation of hydroxyl radicals under irradiation and formation of Ti3+ centers and oxygen vacancies. The generation rate of OH radicals was investigated by the photoluminescence technique in the presence of terephthalic acid. X-ray diffractometry indicated that fluorine stabilized the anatase TiO2. X-Ray photoelectron spectroscopy (XPS) revealed the presence of fluorine on the surface and the shift of th…

Photocatalytic oxidation of gaseous toluene on anatase TiO2 catalyst: Mechanistic aspects and FT-IR investigation

1999

Abstract Photo-oxidation of toluene has been carried out in gas–solid regime by using polycrystalline anatase TiO2 as the catalyst. The reacting gaseous mixture was toluene, air and water in various molar ratios. A pyrex fixed-bed continuous photoreactor irradiated by a medium pressure Hg lamp was used for performing the photoreactivity experiments. The main oxidation product was benzaldehyde but benzene, benzyl alcohol and traces of benzoic acid, phenol and unidentified compounds were also detected. The molar conversion to benzaldehyde with respect to the initial amount of toluene was ca. 20% in the best experimental conditions. Benzene was produced only as a transient product during the f…

Photo-oxidation Behaviour of EVA Antimicrobial Films

2010

Carbon nitride-hydrogen peroxide adduct for selective photo-oxidation

Selective photocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxaldehyde by polymeric carbon nitride-hydrogen peroxide adduct

2018

Abstract Polymeric carbon nitride-hydrogen peroxide adduct (PCN-H2O2) has been prepared, thoroughly characterised and its application for selective photocatalytic conversion of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxaldehyde (FDC) in aqueous suspension has been studied. The PCN-H2O2 adduct is stable in aqueous suspension under UV and solar irradiation up to 100 °C. It is also stable up to 200 °C if heated in air, while at temperatures close to 300 °C its decomposition takes place. Based on the obtained characterisation data it has been proposed that H2O2 attaches to the non-polymerised carbon nitride species and to the heptazine nitrogen atoms, thus producing strong hydrogen bond…

Pluronic nanoparticles as anti-oxidant carriers for polymers

2016

Abstract The immobilization of anti-oxidant stabilizers for polymers, particularly naturally occurring systems, can be considered a valuable route for preventing their migration, volatilization, thermo-degradation and decomposition at typical high processing temperatures, as well as for enhance their solubility in polymers. In this work, an innovative approach for the immobilization of naturally occurring stabilizer, through the encapsulation in copolymer nanoparticles, is proposed. Pluronic nanoparticles (PNPs), based on PEO-PPO-PEO, (PEO: poly (ethylene oxide); PPO: poly(propylene oxide)), without and with quercetin, Q, have been successfully formulated and the critical micellar condition…

Concentration-dependent anti-/pro-oxidant activity of natural phenolic compounds in bio-polyesters

2017

Abstract In this work, the potential of several naturally occurring phenolic compounds, such as Ferulic Acid (FA), Vanillic Acid (VA), Vitamin E (VE) and Quercetin (Q), as stabilizers against the photo-oxidative degradation of Polylactic acid (PLA) has been assessed. Specifically, PLA-based films containing different amounts of considered stabilizers have been formulated and their photo-stability under UVB exposure has been evaluated. The preliminary characterization of the formulated films shows that all used stabilizers exert plasticizing action, as probed by rheological analysis, due to their low molecular weight. Moreover, no significant modification of the PLA crystallinity has been no…

Polymeric carbon nitride (C3N4) as heterogeneous photocatalyst for selective oxidation of alcohols to aldehydes

2018

Abstract Polymeric carbon nitride (C3N4) is a semiconductor material which is a very promising green photocatalyst with good physico-chemical properties and stability. It is a metal-free carbon based non-toxic material which can be easily obtained from earth-abundant components. The robustness and versatility of C3N4 as a photo-redox catalyst allows its use for selective oxidations by heterogeneous photocatalysis. This paper reviews the state of art in the application of C3N4 as heterogeneous photocatalyst for selective oxidation of alcohols to the corresponding aldehydes.

The role of organoclay and matrix type in photo-oxidation of polyolefin/clay nanocomposite films

2009

Abstract In this paper the photo-oxidation behaviour of polyolefin/clay nanocomposite films was studied; in particular, the effect of the amount of organo-modifier and the matrix polarity on the photo-oxidation was investigated. Two different organo-modified clays and compositions of LDPE/EVA blend films were used and the photo-oxidation was followed by mechanical and spectroscopic analyses. The organoclay and matrix type strongly influence the photo-oxidative behaviour of nanocomposite films. The films filled with CL15A show a faster loss of mechanical performance and higher carbonyl formation with respect to the films filled with the CL20A. Additionally, the LDPE based nanocomposite under…

Investigation on the Properties and on the Photo-Oxidation Behaviour of Polypropylene/Fumed Silica Nanocomposites

2021

This work investigates the effects of very small amounts of fumed silica on the morphology and on the rheological and mechanical behaviour of polypropylene nanocomposites and on their photo-oxidation behaviour. Polypropylene nanocomposites were prepared using a twin-screw corotating extruder with 0, 1 and 2 wt/wt% of SiO2. Morphological, mechanical, thermomechanical and rheological properties were examined. It was found that the viscosity of the matrix is reduced by the presence of the silica nanoparticles, suggesting a poor adhesion between the two phases and probably some lubricating effect. On the contrary, the mechanical and, in particular, the thermomechanical properties of the matrix …