Search results for "PHOTOCATALYSIS"
showing 10 items of 606 documents
Photocatalytic oxidation of gaseous toluene on anatase TiO2 catalyst: Mechanistic aspects and FT-IR investigation
1999
Abstract Photo-oxidation of toluene has been carried out in gas–solid regime by using polycrystalline anatase TiO2 as the catalyst. The reacting gaseous mixture was toluene, air and water in various molar ratios. A pyrex fixed-bed continuous photoreactor irradiated by a medium pressure Hg lamp was used for performing the photoreactivity experiments. The main oxidation product was benzaldehyde but benzene, benzyl alcohol and traces of benzoic acid, phenol and unidentified compounds were also detected. The molar conversion to benzaldehyde with respect to the initial amount of toluene was ca. 20% in the best experimental conditions. Benzene was produced only as a transient product during the f…
Photocatalytic activity of anatase-nickel ferrite heterostructures
2015
The simple co-precipitation route was used to couple commercial TiO2 anatase nanopowder with nickel ferrite (NiFe2O4). The morphology and the crystalline structure of composite nanoparticles were characterised by TEM, N2 adsorption-desorption, XRD and Rietveld refinement, XPS and XAS. The optical and magnetic properties were investigated. After co-precipitation NiFe2O4 nanoparticles, composed of spinel ferrite crystal phase, were formed on the surface of TiO2 anatase nanopowder. The TiO2/NiFe2O4 composite oxide demonstrated large specific surface area, high visible light absorption efficiency and efficient charge carrier separation, compared to pristine anatase TiO2 or pristine NiFe2O4, rep…
Physicochemical characterization of metal hexacyanometallate–TiO2composite materials
2015
The paper describes the synthesis and characterization of novel TiO2–metal hexacyanometallates (MHCMs) composite materials. The starting material, TiO2, was modified by addition of cobalt-hexacyanoferrate (CoHCF) or iron-hexacyanocobaltate (FeHCC) at various concentrations. The resulting composites were characterized as follows: cyclic voltammetry (CV) followed the formation of TiO2–MHCM clusters, TEM micrographs studied their morphology, XAS and XPS data indicated that MHCM bonds to TiO2 through the nitrogen atom of its –CN group and modifies the environment of Ti compared to that of pure anatase. As expected, and confirmed by UV-Vis and XP-valence band data, the electronic properties of T…
Surface properties of iron-titania photocatalysts employed for 4-nitrophenol photodegradation in aqueous TiO2 dispersion
1994
Iron(III) doped specimens (0.01–5% atomic Fe ∶ Ti) have been prepared by impregnating polycrystalline “home prepared” TiO2 (mainly anatase) and have been studied for photocatalytic degradation of 4-nitrophenol in aqueous dispersions. Some structural and surface properties have been studied by X-ray diffraction, specific surface area and porosity measurements and FTIR monitoring of pyridine, ammonia and methanoic acid adsorption for surface acidity and basicity. Their surface properties were compared with a corresponding series of photocatalysts prepared by a coprecipitation method. Adsorption of pyridine and ammonia indicates the presence of surface acid Lewis sites, a low concentration of …
Surface and Electronic Features of Fluorinated TiO 2 and Their Influence on the Photocatalytic Degradation of 1-Methylnaphthalene
2020
International audience; Surface fluorination improves the photocatalytic activity of TiO2, and the influences of various features of fluorinated TiO2 (TiO2–F) have often been discussed in the literature. The present paper addresses the changes induced by surface fluorination on the morphological, structural, surface, and electronic features of TiO2. In particular, X-ray diffraction, specific surface area analysis, and transmission and scanning electron microscopy give evidence that surface fluorination does not affect the structural properties and the morphology of TiO2 nanoparticles. In contrast, fluorination induces changes of surface and electronic properties. Chemical and thermogravimet…
High photodegradation and antibacterial activity of BN–Ag/TiO 2 composite nanofibers under visible light
2018
To develop material with good photocatalytic properties for organic compound degradation and bacterial removal, we produced Ag/TiO2 and BN–Ag/TiO2 composite nanofibers that included controlled amounts of boron nitride (BN) nanosheets and silver (Ag). After annealing at 500 °C under air, we used scanning electron microscopy, transmission electron microscopy, Brunauer–Emmet–Teller analysis, X-ray diffraction, energy-dispersive X-ray spectroscopy, Raman spectroscopy, UV-visible reflectance spectroscopy and room temperature photoluminescence to investigate the morphological, structural and optical properties of all samples. The photocatalytic tests using methylene blue under visible light, in r…
Photocatalytic ozonation for a sustainable aquaculture: A long-term test in a seawater aquarium
2019
Abstract A long-term test at a laboratory scale with a closed system (a coral reef aquarium) has been carried out to study the potentialities of photocatalytic ozonation and photocatalysis for the removal of noxious organic compounds in recirculating systems (aquaria and recirculating aquaculture systems) working with a minimum make up of new water. Attention has been focused not only on the depuration capabilities but also on possible negative phenomena, some of which could become apparent only at long times. After having tuned the system by setting appropriate operating conditions and procedures, positive results were obtained. In particular, it was observed that the alternation of photoc…
Concurrent removal of Cr(III), Cu(II), and Pb(II) ions from water by multifunctional TiO2/Alg/FeNPs beads
2019
Abstract The use of multifunctional materials for water remediation is a modern approach where adsorption phenomena and heterogeneous photocatalysis can be applied for the removal of pollutants. Since the ideal remediation system should be able to remove both organic and inorganic pollutants, a crucial aspect to consider is the knowledge of operational parameters affecting the removal process, especially when heavy metal ions are present in concoction as in real systems. Given the proven efficiency of multifunctional TiO2/Alg/FeNPs magnetic beads for the removal of model organic pollutants, this study investigated the possibility to exploit such system also for the removal of mixed heavy me…
Converting p-terphenyl into a novel organo-catalyst for LED-driven energy and electron transfer photoreactions in water.
2021
p-Terphenyl is a potent photoredox catalyst under UV-irradiation. Aiming for more sustainable reaction conditions, we added two sulfonate groups to this key structure to achieve water solubility and incorporated an SO2-bridge thereby shifting the absorption spectrum towards the visible. The resulting photocatalyst shows unexpected triplet reactivity in several test reactions.
Photocatalytic oxidation of phenol on TiO2 powders. A Fourier transform infrared study
1994
Abstract In the present paper a detailed investigation of a well known photoreaction, i.e. phenol photodegradation in the presence of TiO2, has been carried out. The Fourier transform infrared (FT-IR) technique has been used to characterize the catalyst surface and to follow the photoprocess by “in situ” measurements in a gas—solid regime, simulating the aqueous liquid—solid regime in which this photodegradation reaction has been usually carried out. The influence on the photoprocess of the surface hydroxylation of the catalyst has been investigated and the presence of some reaction intermediates has been revealed by FT-IR. The experimental results have demonstrated that the chosen gas—soli…