Search results for "PLASMA"
showing 10 items of 4043 documents
High-resolution spectroscopy of gaseous $^\mathrm{83m}$Kr conversion electrons with the KATRIN experiment
2020
In this work, we present the first spectroscopic measurements of conversion electrons originating from the decay of metastable gaseous $^\mathrm{83m}$Kr with the Karlsruhe Tritium Neutrino (KATRIN) experiment. The results obtained in this calibration measurement represent a major commissioning milestone for the upcoming direct neutrino mass measurement with KATRIN. The successful campaign demonstrates the functionalities of the full KATRIN beamline. The KATRIN main spectrometer's excellent energy resolution of ~ 1 eV made it possible to determine the narrow K-32 and L$_3$-32 conversion electron line widths with an unprecedented precision of ~ 1 %.
Technical challenges in the construction of the steady-state stellarator Wendelstein 7-X
2013
The next step in the Wendelstein stellarator line is the large superconducting device Wendelstein 7-X, currently under construction in Greifswald, Germany. Steady-state operation is an intrinsic feature of stellarators, and one key element of the Wendelstein 7-X mission is to demonstrate steady-state operation under plasma conditions relevant for a fusion power plant. Steady-state operation of a fusion device, on the one hand, requires the implementation of special technologies, giving rise to technical challenges during the design, fabrication and assembly of such a device. On the other hand, also the physics development of steady-state operation at high plasma performance poses a challeng…
Structure, tritium depth profile and desorption from 'plasma-facing' beryllium materials of ITER-Like-Wall at JET
2017
This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053 . The views and opinions expressed herein do not necessarily reflect those of the European Commission.
Direct synthesis of pure brannerite UTi2O6
2019
International audience; A new method based on the precipitation of uranium(IV) and titanium(IV) hydroxide precursors was developed to prepare pure brannerite UTi2O6 samples. In fact, U(IV) dissolved in HCl (6 mol L−1) was mixed to Ti (IV) alkoxyde before a basification step with an excess of NH4OH to obtain a highly reactive nanometric (U,Ti)(OH)4 powder. The obtained powder was then dried under vacuum, pressed into pellets and finally fired at 1300 °C. This method led to the formation of pure brannerite in contrast to previous reported protocols, which showed the formation of impurities such us UO2 and TiO2. The refined unit cell parameters of UTi2O6 led to a = 9.8113(2) Å, b = 3.7681(1) Å…
The role of yttrium and titanium during the development of ODS ferritic steels obtained through the STARS route: TEM and XAS study
2018
Abstract Oxide Dispersion Strengthened Ferritic Steels (ODS FS) are candidate materials for structural components in future fusion reactors. Their high strength and creep resistance at elevated temperatures and their good resistance to neutron radiation damage is obtained through extremely fine microstructures containing a high density of nanometric precipitates, generally yttrium and titanium oxides. This work shows transmission electron microscopy (TEM) and extended X-ray absorption fine structure (EXAFS) characterization of Fe-14Cr-2W-0.3Ti-0.24Y ODS FS obtained by the STARS route (Surface Treatment of gas Atomized powder followed by Reactive Synthesis), an alternative method to obtain O…
Molecular dynamics simulation of the damage production in Al (110) surface with slow argon ions
1986
We have developed a molecular dynamics simulation program to gain more insight into the sputtering process, especially the damage produced by it. We have studied the sputtering of aluminium (110) surface with argon ions. The Morse pair potentail was used for Al−Al interaction, the Lennard-Jones potential for Ar−Ar interaction and both the Moliere potential and the universal potential of Ziegler et al. for Ar−Al interaction. An electronic friction term proportional to the particle velocities was also used. The studied incident argon ion energies and angles were 200 and 400 eV and 0° (normal), 25°, 45° and 75°, respectively. The calculated sputtering yield and the overall shape and the mean d…
Recoil-α-fission and recoil-α–α-fission events observed in the reaction 48Ca + 243Am
2016
Products of the fusion-evaporation reaction 48Ca + 243Am were studied with the TASISpec set-up at the gas-filled separator TASCA at the GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt, Germany. Amongst the detected thirty correlated α-decay chains associated with the production of element Z=115, two recoil-α-fission and five recoil-α-α-fission events were observed. The latter five chains are similar to four such events reported from experiments performed at the Dubna gas-filled separator, and three such events reported from an experiment at the Berkeley gas-filled separator. The four chains observed at the Dubna gas-filled separator were assigned to start from the 2n-evaporation ch…
Evolution of nitrogen concentration and ammonia production in N 2 -seeded H-mode discharges at ASDEX Upgrade
2019
Ammonia formation was studied in a series of dedicated nitrogen seeded H-mode discharges at ASDEX Upgrade. The evolution of ammonia formation was investigated with a reference phase before the seeding, and a long, stable flat-top nitrogen-seeded phase. It was monitored with divertor spectroscopy and analysis of the exhaust gas. The amount of the detected ammonia increased continuously over the course of five discharges with the same nitrogen seeding rate. The same trend was observed in the nitrogen density in the core plasma, as measured by charge exchange recombination spectroscopy and other signals, linked to the effects of nitrogen seeding. The results show that the rate of ammonia forma…
Overview of the DEMO staged design approach in Europe
2019
This paper describes the status of the pre-conceptual design activities in Europe to advance the technical basis of the design of a DEMOnstration Fusion Power Plant (DEMO) to come in operation around the middle of this century with the main aims of demonstrating the production of few hundred MWs of net electricity, the feasibility of operation with a closed-tritium fuel cycle, and maintenance systems capable of achieving adequate plant availability. This is expected to benefit as much as possible from the ITER experience, in terms of design, licensing, and construction. Emphasis is on an integrated design approach, based on system engineering, which provides a clear path for urgent R&D …
GYROCOMPU: Toolbox Designed for the Analysis of Gyrotron Resonators
2020
The key point of gyrotron design is the analysis of the radio frequency (RF) behavior in gyrotron resonators. This article proposes a comprehensive, user-friendly and effective gyrotron design toolbox (GYROCOMPU) based on the MATLAB platform. GYROCOMPU associates a relatively complete set of codes for gyrotron analysis and integrates them together into a graphical user interface (GUI). The solving algorithm of the cold cavity equations and self-consistent equations is improved. The solving method improvement in these calculation algorithms renders the analysis more efficient and accurate. Three typical examples of gyrotrons working in the 140-GHz TE03 mode, 42-GHz TE03 mode, and 140-GHz TE1…