Search results for "PLASTICS"

showing 10 items of 2724 documents

Novel water-swellable beads based on an acryloylated polyaspartamide

2001

Spherical polymeric microparticles have been prepared by a reverse-phase suspension polymerization technique. The starting polymer was α,β-poly (N-2-hydroxyethyl)-dl-aspartamide (PHEA) partially functionalised with glycidylmethacrylate (GMA) in order to introduce reactive vinyl groups in the side chain. The PHEA–GMA copolymer obtained (PHG) was cross-linked in a mixture of water/hexane–carbon tetrachloride in the presence of sorbitan trioleate (Span 85) as surfactant and ammonium persulfate/N,N,N′,N′-tetramethylethylenediamine as initiator system. The reaction was also carried out in the presence of N,N′-dimethylacrylamide as comonomer or N,N′-ethylenebisacrylamide as a cross-linking agent.…

Aqueous solutionPolymers and PlasticsComonomerchemistry.chemical_compoundColloid and Surface ChemistryDifferential scanning calorimetrychemistryChemical engineeringPolymer chemistryMaterials ChemistrymedicineCopolymerSide chainAmmonium persulfateSuspension polymerizationPhysical and Theoretical ChemistrySwellingmedicine.symptomColloid & Polymer Science
researchProduct

Static and dynamic light scattering by aqueous polyelectrolyte solutions: effect of molecular weight, charge density and added salt

1990

Abstract Aqueous solutions of quaternized poly(2-vinylpyridine) were investigated by static (SLS) and dynamic (DLS) light scattering over a wide range of polyelectrolyte, c pe , and salt concentrations, c s (10 −3 ≤ c pe ≤ 10 2 gl −1 , 10 −5.5 ≤ c s ≤ 10 −1 moll −1 ). Using DLS the cooperative diffusion coefficient D was measured as a function of c pe and c s . D exhibits a characteristic behaviour in each of three different concentration regimes. In the ‘dilute lattice’ regime, where λ = c pe c s ⪡ 1 , one diffusion coefficient is observed. In the transition regime, where λ ≈ 1, D increases with increasing polyelectrolyte concentration and a slow diffusive mode gradually appears. For λ ⪢ 1…

Aqueous solutionPolymers and PlasticsDynamic light scatteringIonic strengthChemistryOrganic ChemistryMaterials ChemistryAnalytical chemistryConcentration effectCharge densitySmall-angle neutron scatteringLight scatteringPolyelectrolytePolymer
researchProduct

Investigation of the Interpolymer Complex between Hydroxypropyl Cellulose and Maleic Acid-Styrene Copolymer, 1

2004

The hydrogen bonding-interpolymer association of hydroxypropyl cellulose (HPC) with maleic acid-styrene (MAc-S) copolymer has been investigated in dilute aqueous solution by viscometry, turbidimetry and potentiometry. At a mixing ration between MAc-S and HPC of 10:90, the solution exhibits a phase separation upon heating, while for other mixing ration no phase separation could be detected. The stability of the interpolymer complex (IPC) increases as the temperatures rises. The stoichiometry of the IPC, in mole units, was estimated as being MAc-S:HPC=5:2. The thermodynamic functions (enthalpy and entropy) of the complexation process have been determined.

Aqueous solutionPolymers and PlasticsMaleic acidChemistryHydroxypropyl celluloseOrganic ChemistryEnthalpyCondensed Matter PhysicsPolyelectrolyteStyrenechemistry.chemical_compoundPolymer chemistryMaterials ChemistryCopolymerTurbidimetryPhysical and Theoretical ChemistryMacromolecular Chemistry and Physics
researchProduct

NEW GRAFT COPOLYMERS OF HYALURONIC ACID AND POLYLACTIC ACID: SYNTHESIS AND CHARACTERIZATION

2006

Abstract New graft copolymers have been synthesized, using hyaluronic acid (HA) as a hydrophilic backbone and polylactic acid (PLA) as an aliphatic polyester in order to obtain new polymeric derivatives of HA able to hydrophobically associate in an aqueous medium. Hyaluronic acid with low molecular weight was made soluble in organic solvent by transformation to its tetrabutylammonium (TBA) salt. Using the HA–TBA derivative, the reaction was performed in dimethylsulfoxide adding as a reagent the N -hydroxysuccinimide derivative of PLA. Two HA–PLA graft copolymers have been synthesized and characterized by FT-IR, 1 H NMR spectroscopy and gel permeation chromatography. The interaction between …

Aqueous solutionPolymers and PlasticsOrganic ChemistryChemical modificationhyaluronic acid self assemblyPolyelectrolytePolyesterHydrophobic effectGel permeation chromatographychemistry.chemical_compoundPolylactic acidchemistryPolymer chemistryMaterials ChemistryCopolymer
researchProduct

Fractional dissolution of “solid” unsubstituted cellulose

2000

Activated cellulose (Solucell, DP w = 1400) was extracted stepwise at room temperatures by means of mixed solvents consisting of N,N-dimethylacetamide (DMAc) and LiCl, starting with a salt concentration of 1 wt.-% and increasing it in increments of 1 wt.-% up to 7 wt.-%. Upon the regeneration of the thus obtained cellulose fractions by pouring the solutions dropwise into a large surplus of water, part of the mixed solvent is occluded in the polymer. For that reason the cellulose samples were purified by redissolving them in Ni-tren and by a second precipitation. This process, however, leads to pronounced polymer degradation. For that reason we have used a spinning nozzle to press the extrac…

Aqueous solutionPolymers and PlasticsOrganic ChemistryExtraction (chemistry)Condensed Matter PhysicsSolventchemistry.chemical_compoundchemistryPolymer chemistryMaterials ChemistrymedicineTartaric acidFerricMolar mass distributionOrganic chemistryPhysical and Theoretical ChemistryCelluloseDissolutionmedicine.drugNuclear chemistryMacromolecular Chemistry and Physics
researchProduct

Fractionation of unsubstituted cellulose from solutions in either Ni-tren or (N,N-dimethylacetamide + LiCl)

2000

Starting from solutions of unsubstituted cellulose (Avicel PH101, M w = 30.1 kg/mol and M w /M n = 3 or Solucell 500, M w = 230 kg/mol, M w /M n = 2.8) in either Nitren (0.8 M aqueous solution of the dihydroxotris(2-aminoethly)amine nickel(II) complex) or in a mixed solvent DMAc+LiCl (consisting of N,N-dimethylacetamide plus lithium chloride) it was investigated whether the segregation of a second phase caused by the addition of suitable precipitants leads to polymer fractionation. With Ni-tren the long chains accumulate in the precipitate formed upon the addition of sulfuric acid; as the pH falls below 9, the solution is free of cellulose. Nevertheless this route option for fractionation m…

Aqueous solutionPolymers and PlasticsOrganic ChemistryFractionationCondensed Matter PhysicsDimethylacetamideSolventchemistry.chemical_compoundchemistryPolymer chemistryMaterials ChemistryAcetoneLithium chloridePhysical and Theoretical ChemistryCellulosePolymer fractionationMacromolecular Chemistry and Physics
researchProduct

Synthesis of phenol–formaldehyde resole resins in the presence of tetraalkylammonium hydroxides as catalysts

2000

Abstract We synthesised phenol–formaldehyde resole resins in the presence of tetraalkylammonium hydroxides as catalysts. The activity of these catalysts was compared with the activity of sodium hydroxide. Gas chromatography, thin layer chromatography, 13 C NMR spectrometry, potentiometric titration and a few simple physicochemical methods were used to estimate the composition of the obtained resins and their properties. It was concluded from these studies that tetraalkylammonium hydroxides are active catalysts and the resins obtained in their presence show some interesting properties.

Aqueous solutionPolymers and PlasticsOrganic ChemistryPotentiometric titrationFormaldehydeThin-layer chromatographyCatalysischemistry.chemical_compoundchemistrySodium hydroxideMaterials ChemistryPhenolOrganic chemistryGas chromatographyPolymer
researchProduct

Dielectric Behavior of Aqueous Solutions of α,β-Poly(aspartyl hydrazide) and α,β-Poly(N-hydroxyethyl aspartamide): An Investigation of the Structural…

1994

The dielectric properties of aqueous solutions of α,β-poly(aspartyl hydrazide) (PAHy) and of α,β-poly( N-hydroxyethyl aspartamide) (PHEA) were measured at 25 ° C in the frequency range of 100 MHz to 15 GHz using a time domain reflection method (TDR). Single time relaxation processes were found at 2 GHz and 15 GHz, respectively. The low frequency dispersion was inter preted in terms of the dynamics of polymeric segments based on the dielectric relaxation strength and the relaxation time. The high frequency process which is attributed to the rotational relaxation of water, indicated that water mole cules surrounding the polymeric backbone and in the pure state have a similar rotational behav…

Aqueous solutionPolymers and PlasticsRelaxation strength0206 medical engineeringRelaxation (NMR)Analytical chemistryBioengineering02 engineering and technologyDielectricLow frequency021001 nanoscience & nanotechnologyHydrazide020601 biomedical engineeringBiomaterialschemistry.chemical_compoundCrystallographyReflection (mathematics)chemistryMaterials Chemistry0210 nano-technologyDispersion (chemistry)Journal of Bioactive and Compatible Polymers
researchProduct

Study of Inductive Coupled Hydrogen and Argon Plasma Interaction with SiO2 Glass

2009

This work is devoted to the diagnostics of interaction between hydrogen and argon with the surface of SiO2 glass walls. For diagnostics of the interaction, special high-frequency electrodeless light sources were prepared, filled with pure argon of 1 Torr or argon-hydrogen of total pressure of 1 Torr (Ar/H2 mixing ratio is 9:1). Besides the mostly used spherical and cylindrical lamps, dumbbell type lamps have also been investigated. The spectroscopic and AFM measurements showed that in comparison with pure argon plasma, the argon-hydrogen plasma causes non-uniform changes of the SiO2 surface. For these modifications active OH are primarily responsible molecules, created in the reactions of h…

ArgonPolymers and PlasticsHydrogenPlasma cleaningPhysics::Instrumentation and DetectorsChemistryAnalytical chemistrychemistry.chemical_elementPlasmaCondensed Matter PhysicsPhysics::Plasma PhysicsSurface modificationMoleculePhysics::Atomic PhysicsPhysics::Chemical PhysicsTotal pressureSpectroscopyPlasma Processes and Polymers
researchProduct

New Fluorescent Heterocyclic Compounds Derived From 3-Cyanobenzanthrone

2021

The four-cyclic condensed aromatic ketone 7H-benz[de]anthracene-7-one and its derivatives belong to the class of important anthraquinoid dyes, including laser and luminescent dyes. Current work is ...

Aromatic ketonechemistry.chemical_compoundPolymers and PlasticschemistryOrganic ChemistryMaterials ChemistryFluorescenceCombinatorial chemistryBenzanthronePolycyclic Aromatic Compounds
researchProduct