Search results for "PRESSING"

showing 10 items of 74 documents

Uniaxial stress dependence of the dielectric and ferroelectric properties of the Na0.5K0.5NbO3and Na0.5K0.5NbO3 + 0.5 mol%MnO2ceramics

2013

Na0.5K0.5NbO3 and Na0.5K0.5NbO3 + 0.5 mol%MnO2 lead-free ceramics have been produced by solid phase hot pressing sintering process at 1120–1145°C. The results of the X-ray diffraction measurements showed that the obtained samples possessed a perovskite structure. The micrograph of the fractured surface showed a dense ceramic structure, in compliance with 93% relative density determined by the Archimedes method. The dependence of dielectric and ferroelectric properties on the uniaxial compressive stress (0–3000 bar) of the Na0.5K0.5NbO3 and Na0.5K0.5NbO3 + 0.5 mol%MnO2 ceramics was investigated. Significant influence of the external stress on these properties was revealed. It includes a shif…

PermittivityPhase transitionMaterials scienceDielectricHot pressingFerroelectricityCrystallographyvisual_artHardening (metallurgy)visual_art.visual_art_mediumRelative densityGeneral Materials ScienceCeramicComposite materialInstrumentationPhase Transitions
researchProduct

Influence of Compressive Stress on Dielectric and Ferroelectric Properties of the Na0. 5K0.5NbO3, Na0.5K0.5(Nb0.94Sb0.06)O3and Na0.5K0.5(Nb0.94Sb0.06…

2013

Good quality lead-free ceramics of Na0.5K0.5NbO3, Na0.5K0.5(Nb0.94Sb0.06)O3 and Na0.5K0.5(Nb0.94Sb0.06)O3 +0.5mol%MnO2 have been produced by a solid phase hot pressing sintering process at 1120–1145°C. The dependence of dielectric and ferroelectric properties on the uniaxial pressure (0–3000 bar) of the these samples was investigated, revealing a significant influence of the external stress on their properties. This includes a shift of the phase transition, a diffuseness of the permittivity characteristics, a change of the dielectric dispersion and a decrease of the polarization. We discuss our results based on hardening of the soft-mode and domain switching processes under applying of pres…

PermittivityPhase transitionMaterials scienceSinteringDielectricCondensed Matter PhysicsHot pressingFerroelectricityElectronic Optical and Magnetic Materialsvisual_artvisual_art.visual_art_mediumHardening (metallurgy)CeramicComposite materialFerroelectrics
researchProduct

Influence of the suspension of continued treatment with flurazepam and amobarbital on two discrimination learning schedules.

1977

The authors have studied the effect of the suspension of chronic treatment with flurazepam and amobarbital on the operant behavior of rats that for the first time were in the presence of two fixed-interval discrimination schedules. With the sound discrimination schedule, the responses emitted by the treated animals had characteristics similar to those of control animals. With the temporal discrimination schedule, though it is not possible to distinguish between learning rates, modifications in the intensity of the effect (increases in lever pressing) indicate that, considering the doses, the action of flurazepam is slight and that of amobarbital clear and statistically significant.

PharmacologyMaleScheduleReinforcement ScheduleTime FactorsFlurazepamAmobarbitalPharmacology toxicologyRatsSubstance Withdrawal SyndromeDiscrimination LearningFlurazepamAcoustic StimulationAnti-Anxiety AgentsAnesthesiamedicineSound discriminationAmobarbitalAnimalsHumansLever pressingDiscrimination learningPsychologyTemporal discriminationmedicine.drugPsychopharmacology
researchProduct

DIELECTRIC PROPERTIES OF LEAD-FREE [(1-x)(Na0.5Bi0.5)-xBa]Zr1−yTiyO3CERAMICS (x = 0.01, 0.06, 0.085, 0.09, 0.1 AND y = 0.96, 0.97)

2008

ABSTRACT Lead-free ceramics based on (Na0.5Bi0.5TiO3, NBT)-(Ba(Ti, Zr)O3, BTZ) were prepared by solid phase synthesis and hot pressing sintering process and their dielectric properties have been studied. The obtained results were compared with these for pure NBT. The obtained samples show pure perovskite structure. Low frequency (100 Hz-100 kHz) investigations reveal the diffuse phase transitions and relaxorlike behaviour. The obtained results are discussed in terms of inhomogeneity of ions distribution, their ferro- and antiferroactivity and internal stresses. The NBT-BTZ system is expected to be a new promising candidate for lead-free electronic ceramics.

Phase transitionMaterials scienceAnalytical chemistryMineralogySinteringDielectricLow frequencyCondensed Matter PhysicsHot pressingFerroelectricityElectronic Optical and Magnetic MaterialsIonControl and Systems Engineeringvisual_artMaterials ChemistryCeramics and Compositesvisual_art.visual_art_mediumCeramicElectrical and Electronic EngineeringIntegrated Ferroelectrics
researchProduct

Production and Properties of (1-x)Pb(Sc<sub>1/2</sub>Nb<sub>1/2</sub>)O<sub>3</sub> – xPb(Yb<sub>1/2</su…

2004

Phase transitionMaterials scienceChemical engineeringMechanics of MaterialsMechanical EngineeringGeneral Materials ScienceHot pressingSolid solutionKey Engineering Materials
researchProduct

Dielectric Properties of Na0.5K0.5(Nb1-xSbx)O3+MnO2 Ceramics (x = 0.04, 0.05 and 0.06)

2011

Lead-free ceramics Na0.5K0.5(Nb1-xSbx)O3+0.5mol%MnO2 (x = 0.04, 0.05 and 0.06) were prepared by conventional sintering and hot pressing process; their microstructure and dielectric properties have been studied. It is found that increase of sintering temperature promotes the obtaining highly dense microstructure and increase in grain size while doping with Sb contributes to more dense and homogeneous microstructure and smaller grain size. Low frequency (100 Hz-200 kHz) investigations revealed the diffuse phase transitions. It can be concluded from experimental results that Sb doping improves dielectric properties. The obtained materials are expected to be promising candidates for lead-free e…

Phase transitionMaterials scienceDopingMineralogySinteringDielectricCondensed Matter PhysicsHot pressingMicrostructureGrain sizeElectronic Optical and Magnetic MaterialsControl and Systems Engineeringvisual_artMaterials ChemistryCeramics and Compositesvisual_art.visual_art_mediumCeramicElectrical and Electronic EngineeringComposite materialIntegrated Ferroelectrics
researchProduct

Structural, thermal, dielectric and ferroelectric properties of Na0.5K0.5NbO3and Na0.5K0.5NbO3+0.5mol%MnO2ceramics

2014

Lead-free Na0.5K0.5NbO3 and Na0.5K0.5NbO3+0.5mol%MnO2 ceramics were fabricated by solid state hot pressing sintering process. The phase structure and thermal, dielectric and ferroelectric properties of these ceramics were investigated. X-ray measurements showed that all samples have a single perovskite structure and possess orthorhombic–tetragonal and tetragonal–cubic phase transitions. Sequence of phase transitions was confirmed by differential scanning calorimetry (DSC) and dielectric measurements. Obtained results showed that optimal temperature sintering of Na0.5K0.5 NbO3+0.5mol%MnO2 ceramics is 1100 °C. The results show that investigated ceramics are one of the promising materials as e…

Phase transitionMaterials scienceSinteringDielectricHot pressingFerroelectricityDifferential scanning calorimetryPhase (matter)visual_artvisual_art.visual_art_mediumGeneral Materials ScienceCeramicComposite materialInstrumentationPhase Transitions
researchProduct

Structure, nanohardness and photoluminescence of ZnO ceramics based on nanopowders

2015

ZnO ceramics obtained from grained powders with different grain size by hot pressing and ceramics from tetrapods nanopowders obtained by press-less sintering have been investigated under identical conditions. Ceramics obtained by hot pressing were optically transparent but were composed of large inhomogeneous grains (d = 8–35 μm) exhibiting a substructure. Decreased values of elastic modulus within a grain and a wide defect-associated ('green') photoluminescence (PL) band at 2.2–2.8 eV in conjunction with a weak excitonic band indicate a high concentration of residual point defects in hot pressed ZnO ceramics. Utilization of more small-grained powders contributes to the formation of more un…

PhotoluminescenceMaterials scienceSinteringCondensed Matter PhysicsMicrostructureHot pressingCrystallographic defectAtomic and Molecular Physics and OpticsGrain sizeGrain growthvisual_artvisual_art.visual_art_mediumCeramicComposite materialMathematical PhysicsPhysica Scripta
researchProduct

“Ice” juice from apples obtained by pressing at subzero temperatures of apples pretreated by pulsed electric fields

2016

Abstract The impact of apple pretreatment by pulsed electric field (PEF) on juice extraction using the freezing-assisted pressing was studied. Apple discs were PEF pretreated at electric field strength of E  = 800 V/cm and then air blast frozen inside the freezer (− 40 °C). Then, pressing experiments in a laboratory-pressing chamber (2–5 bars) were started at sub-zero temperature (− 5 °C). Time evolution of juice yield and its nutritional qualities were compared for PEF and untreated apple samples. High improvements of juice yield were obtained for freeze-thawed (FT) and PEF + FT samples. The combination of PEF + pressing (5 bar) at sub-zero temperature gave optimum results for juice extrac…

PressingChemistryIndustrial scaleExtraction (chemistry)04 agricultural and veterinary sciencesGeneral Chemistry040401 food scienceIndustrial and Manufacturing EngineeringAntioxidant capacity0404 agricultural biotechnologyElectric fieldYield (chemistry)Food scienceAir blastFood ScienceInnovative Food Science & Emerging Technologies
researchProduct

Methane production from orange peel pressing liquid: A kinetic study

1992

Abstract This paper studies the anaerobic fermentation of orange peel pressing liquid (OPPL), in semi‐continuous digesters under thermophilic conditions (50, 55 and 60°C), using rabbit manure as inoculum which has been previously conditioned to substrate and temperature. Experimental data have been fitted, at each temperature, to the Chen and Hashimoto model. Kinetic parameters governing the process have been obtained. It can be observed that both μm and K decrease when temperature increases, within the studied range, whereas the calculated minimum hydraulic retention time, θm, increases with temperature, as tested experimentally.

PressingChromatographyHydraulic retention timeMethanogenesisChemistryKineticsAnalytical chemistryGeneral MedicineOrange (colour)Kinetic energyManureEnvironmental ChemistryFermentationWaste Management and DisposalWater Science and TechnologyEnvironmental Technology
researchProduct