Search results for "PRESSURE"
showing 10 items of 4493 documents
Summertime columnar content of atmospheric water vapor from ground-based Sun-sky radiometer measurements through a new in situ procedure
2010
[1] A new in situ technique for the retrieval of atmospheric water vapor content (i.e., precipitable water content) from Sun photometric direct solar irradiance measurements, taken at the 940 nm wavelength during clear‐sky conditions, is presented. The procedure is applied to summer data recorded in 2007, 2008, and 2009 with a Sun‐sky radiometer at the San Pietro Capofiume station in the Po valley, Italy. It is a preliminary development of the retrieval procedure providing the columnar water vapor content from measurements performed with PREDE Sun‐sky radiometers. The technique brings improvement and innovation by retrieving the best values of constants (a and b), characterizing atmospheric…
A study on the fragmentation of sulfuric acid and dimethylamine clusters inside an atmospheric pressure interface time-of-flight mass spectrometer
2022
Abstract. Sulfuric acid and dimethylamine vapours in the atmosphere can form molecular clusters, which participate in new particle formation events. In this work, we have produced, measured, and identified clusters of sulfuric acid and dimethylamine using an electrospray ionizer coupled with a planar-differential mobility analyser, connected to an atmospheric pressure interface time-of-flight mass spectrometer (ESI–DMA–APi-TOF MS). This set-up is suitable for evaluating the extent of fragmentation of the charged clusters inside the instrument. We evaluated the fragmentation of 11 negatively charged clusters both experimentally and using a statistical model based on quantum chemical data. Th…
Application of an O-ring pinch device as a constant-pressure inlet (CPI) for airborne sampling
2020
We present a novel and compact design of a constant-pressure inlet (CPI) developed for use in airborne aerosol mass spectrometry. In particular, the inlet system is optimized for aerodynamic lenses commonly used in aerosol mass spectrometers, in which efficient focusing of aerosol particles into a vacuum chamber requires a precisely controlled lens pressure, typically of a few hectopascals. The CPI device can also be used in condensation particle counters (CPCs), cloud condensation nucleus counters (CCNCs), and gas-phase sampling instruments across a wide range of altitudes and inlet pressures. The constant pressure is achieved by changing the inner diameter of a properly scaled O-ring that…
A predictive model for salt nanoparticle formation using heterodimer stability calculations
2021
Acid–base clusters and stable salt formation are critical drivers of new particle formation events in the atmosphere. In this study, we explore salt heterodimer (a cluster of one acid and one base) stability as a function of gas-phase acidity, aqueous-phase acidity, heterodimer proton transference, vapor pressure, dipole moment and polarizability for salts comprised of sulfuric acid, methanesulfonic acid and nitric acid with nine bases. The best predictor of heterodimer stability was found to be gas-phase acidity. We then analyzed the relationship between heterodimer stability and J4×4, the theoretically predicted formation rate of a four-acid, four-base cluster, for sulfuric acid salts ove…
Une méthode rapide et simple pour l'estimation de la position de la courbe de dissociation de l'oxyhémoglobine
1989
The methods currently available for assessing the oxyhaemoglobin dissociation curve parameters are expensive, lengthy, require a large volume of blood, and the results obtained are modified by anaesthetic gases. The equipment required for the method described includes: a microtonometre, microcuvettes, 3 gas bottles containing different oxygen, carbon dioxide and nitrogen mixtures (4.5%, 5.6%, 89.9%; 3.5%, 5.6%, 90.9%; 2.5%, 5.6%, 91.9% respectively), a microxymetre, and a micropHmetre. The samples in the microcuvettes are incubated at 37 degrees C in a gas flow of 45 ml.min-1 from the bottles. SO2 is then read using the microxymetre. P50, i.e. PO2 at 50% saturation, is calculated, as well a…
Characterization of methyl orange and its photocatalytic degradation products by HPLC/UV–VIS diode array and atmospheric pressure ionization quadrupo…
2002
Abstract HPLC/UV–VIS diode array and HPLC/MS techniques were successfully applied to the analysis of sulfonated molecules present in samples coming from the photocatalytic degradation of the azo dye indicator, methyl orange. The substrate was chosen as a simple model for the study of reactions involving the more complex commercial products used for the dyeing of textile fibers. Unexpected MS fragmentation path was observed, due to the very stable methyl orange molecular structure. The chromatographic information were combined with the obtained MS, MS/MS data and the UV–VIS diode array spectra and allowed to rationalize the molecular structures attributable to the various degradation product…
Surface tension and density of binary mixtures of monoalcohols, water and acetonitrile: equation of correlation of the surface tension
2009
Measurements of the surface tension (σ) and density (ρ) of binary mixtures of monoalcohols, water and acetonitrile at 298.15 K and at atmospheric pressure, as a function of mole fraction (x) have been made. The experimental values of the deviation of surface tension and the excess of molar volume (Δσ, V E) have been correlated by the Redlich–Kister equation. An empirical correlation equation is presented for the study of the surface tension of these mixtures, and comparisons are made of the experimental values of surface tension versus those obtained with the correlation equation and with other models of correlation. Finally, with the purpose of corroborating the validity of the correlation…
Density, Viscosity, and Sound Speed of Bis(trifluoromethylsulfonyl)imide-Based Ionic Liquids + 1-Propanol Mixtures
2015
The density, viscosity, and speed of sound of three mixtures formed by 1-propanol and an ionic liquid were measured in a temperature range of 278.15–338.15 K. All measurements were made at atmospheric pressure and covered the entire range of miscible compositions. The three ionic liquids have the same anion but differ in the cation: 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [emim][NTf2], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf2], and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [hmim][NTf2]. The experimental data allowed calculate the molar volume and isentropic compressibility of the mixture and their respective exces…
Comparison between catalytic and catalytic photo-assisted propene hydration by using supported heteropolyacid
2012
Abstract Hybrid materials have been prepared by impregnation of the heteropolyacid H 3 PW 12 O 40 on commercial TiO 2 . The polyoxometalates (POM) amount deposited was 15, 30, 50 and 70% with respect to the weight of the TiO 2 support. Moreover two samples containing a POM amount of 15, and 50% with respect to the weight of SiO 2 were also prepared for the sake of comparison. All prepared samples were efficient catalysts for the hydration of propene to 2-propanol in gas–solid regime at atmospheric pressure and at temperatures ranging between 50 and 85 °C. The study carried out on the hybrid TiO 2 based materials evidenced that, as far as the catalytic activity is concerned, exists an optimu…
Viscosity and density of binary mixtures of alcohols and polyols with three carbon atoms and water: equation for the correlation of viscosities of bi…
2009
Measurements have been made of the viscosity and density of binary mixtures of alcohols and polyols with three carbon atoms and water at 298.15 K and at atmospheric pressure, as a function of the mole fraction. Fits have been made of the experimental values corresponding to the excesses of molar volume (V E), the deviations of viscosity (Δη), and the excesses of Gibbs free energy of activation (G* E), by means of the Redlich–Kister equation. A new correlation equation is presented for studying the viscosity of such mixtures, and comparisons are made of the experimental values of viscosity versus the values obtained by means of the mentioned equation and the models of Heric and McAllister. L…