Search results for "PULP"
showing 10 items of 717 documents
Recognition of root canal orifices at a distance – a preliminary study of teledentistry
2011
The remote recognition of root canal orifices was tested on 50 images of endodontically accessed teeth acquired with an intra-oral camera. The images were stored on a laptop computer and were presented to 20 observers who marked the visible canal orifices using software which stored the canal locations in standard files. The marked positions were verified on histological slices. In 87% of the cases, the canal locations were marked correctly. Inter-observer reliability depended on the location of the reviewed root canal (kappa = 0.44–0.77). The detection rate was related to the professional experience of the observers. The maximum proportion of accurate detections was found for the observer…
How can droplet formation occur in endodontically treated teeth during bonding procedures?
2008
PURPOSE: The aim of this in vivo study was to clarify how blistering formation occurs along intraradicular dentin bonded interfaces. MATERIALS AND METHODS: Patients were selected and post space was prepared in vivo in endodontically treated teeth. Post space was etched, dried with ethanol, and bonded with one of the following adhesive systems: All Bond 2, XP-Bond, Clearfil SE Bond, Xeno III. The four adhesives were considered as representative of each bonding system class. An additional group was prepared with phosphoric acid treatment + application of Pre-Bond unfilled resin of All Bond 2, without the use of the primer agent. Etching was avoided for self-etching materials. Replicas of the …
Reactivation of aerobic granular sludge for the treatment of industrial shipboard slop wastewater: Effects of long-term storage on granules structure…
2021
Abstract This work reports on reactivation of aerobic granular sludge (AGS) for the treatment of industrial recalcitrant wastewater (slop wastewater) characterized by high salinity and hydrocarbons. AGS were reactivated in two reactors, R1 and R2, to treat industrial slop wastewater after a long-term storage for 12-months at 4 °C. In R1, salt-adapted mature aerobic granules were previously subjected to a step-wise increase of hydrocarbons, whereas in R2 aerobic granules were previously cultivated in presence of salinity and hydrocarbons. After a short-term reactivation period, the slop dosage caused a simultaneous decrease of granules dimensions and proteins/polysaccharides (PN/PS) ratio do…
A Closed Biotechnological System for the Manufacture of Nonfood Products from Cereals
1997
The production of nonfood products from agricultural raw materials is an important challenge. Efficiency of grain processing for sustainable development depends to a large extent on the harmony of the proposed system. Such a system must include consideration of all steps in the cycle from preparation of the field through cultivation of the grain crop; harvesting; total biomass utilization during processing stages; treatment of wastes; and back to preparation of the field. A closed biotechnological system can be recommended for processing of agricultural raw materials. Ethanol production from potatoes in a closed system is presented in Figure 1. Lysine production is represented schematically…
Studies on Using Sugar Beet for Bio-Ethanol for Vehicle Motors
2011
The paper presents some researches on using sugar beet for producing bio-ethanol, considering the advantages which this raw material presents compared to other materials from which bio-ethanol can be obtained. One of the reasons of using bio-ethanol for motors as a fuel is the goal to reduce of 20% of greenhouse gases and it is established that the emissions of CO2 are much reduced in the case of bio-ethanol than that of conventional fuels.
Intermittent operation of UASB reactors treating wastewater polluted with organic solvents: process performance and microbial community evaluation
2019
The effect of intermittent feeding on the treatment of wastewater polluted with ethanol, ethyl acetate and 1-ethoxy-2-propanol in anaerobic upflow sludge blanket reactors was investigated. Three laboratory-scale reactors, one periodically supplemented with chitosan, were operated in an intermittent pattern (16 hours per day; 5 days per week) during 5 months. Removal efficiencies higher than 94% were obtained at organic loading rates up to 50 kg COD m−3 d−1. The addition of chitosan positively affected the specific methanogenic activity of the granular sludge. Although partial deterioration of the granules was observed, it was not correlated with variations in the production of extracellular…
Preliminary data set to assess the performance of an outdoor membrane photobioreactor
2019
[EN] This data in brief (DIB) article is related to a Research article entitled 'Optimising an outdoor membrane photobioreactor for tertiary sewage treatment' [1]. Data related to the effect of substrate turbidity, the ammonium concentration at which the culture reaches nitrogen-deplete conditions and the microalgae growth rate under outdoor conditions is provided. Microalgae growth rates under different substrate turbidity were obtained to assess the reduction of the culture's light availability. Lab-scale experiments showed growth rates reductions of 22-44%. Respirometric tests were carried to know the limiting ammonium concentration in thismicroalgae-basedwastewater treatment system. Gro…
Abatement of styrene waste gas emission by biofilter and biotrickling filter: comparison of packing materials and inoculation procedures.
2015
The removal of styrene was studied using 2 biofilters packed with peat and coconut fibre (BF1-P and BF2-C, respectively) and 1 biotrickling filter (BTF) packed with plastic rings. Two inoculation procedures were applied: an enriched culture with strain Pseudomonas putida CECT 324 for biofilters and activated sludge from a municipal wastewater treatment plant for the BTF. Inlet loads (ILs) between 10 and 45 g m-3 h-1 and empty bed residence times (EBRTs) from 30 to 120 s were applied. At inlet concentrations ranging between 200 and 400 mg Nm-3, removal efficiencies between 70 and 95% were obtained in the 3 bioreactors. Maximum elimination capacities (ECs) of 81 and 39 g m-3 h-1 were obtained…
Aspen Plus process-simulation model: Producing biogas from VOC emissions in an anaerobic bioscrubber
2018
A process-simulation model for a novel process consisted of an anaerobic bioscrubber was developed in Aspen Plus®. A novel approach was performed to implement the anaerobic reactor in the simulation, enabling it to be connected to the scrubber. The model was calibrated and validated using data from an industrial prototype that converted air emissions polluted with volatile organic compounds with an average daily concentration of 1129 mgC Nm−3 into bioenergy for more than one year. The scrubber, which showed a removal efficiency within 83-93%, was successfully predicted with an average absolute relative error of 5.2 ± 0.08% using an average height-to-theoretical-plate value of 1.05 ± 0.08 m …
Effect of Temperature on N2O and NO Emission in a Partial Nitrification SBR Treating Reject Wastewater
2017
Temperature is a very important parameter during nitritation, having a direct effect on ammonia oxidation rate (AOR) and enzymatic activities which relate to both N2O and NO emission. This study aims at investigating the effect of temperature on AOR, N2O and NO production in an enriched ammonia oxidizing bacteria (AOB) sequencing batch reactor (SBR) performing partial nitrification (PN) of synthetic reject wastewater. To achieve that, a SBR was subject to several shifts in temperature (in the range of 30 to 15 °C, 5 °C for each decrease). Cycle studies, which contain two aeration phases, were conducted under each temperature. The results showed that AOR specific exponentially correlates wit…