Search results for "PULP"
showing 10 items of 717 documents
Influence of ground tire rubber on the transient loading response of a peat biofilter
2010
Abstract The effect of using ground tire rubber (GTR) as an adsorptive material in the removal of a 2:1:1 weight mixture of n-butyl acetate, toluene and m-xylene by using a peat biofilter under different intermittent conditions was investigated. The performance of two identical size biofilters, one packed with fibrous peat alone and the other with a 3:1 (vol) fibrous peat and GTR mixture, was examined for a period of four months. Partition coefficients of both materials were measured. Values of 53, 118 and 402 L kg −1 were determined for n-butyl acetate, toluene and m-xylene in peat, respectively; and values of 40, 609 and 3035 L kg −1 were measured for the same compounds in GTR. Intermitte…
Gas chromatographic and mass spectrometric analysis of chlorinated catechols occurring in pulp bleach liquors
1982
Chlorination step (C-step), spent bleach liquor from a kraft pulp mill and the product from the chlorination of guaiacol in aqueous solution have been investigated for their content of chlorinated catechols. After separation the samples were derivatized with diazoethane and analysed by glass capillary gas chromatography with an electron capture detector. The external standard mixture of all ethylated chlorocatechols was used in the measurements. The structures of the compounds identified were confirmed by gas chromatography/mass spectrometry. Eight chlorinated catechols were identified from a sample prepared by chlorination of guaiacol with Cl2 in aqueous solution. However, only four of the…
Characterization of high molecular mass material in ECF and TCF bleaching liquors by Py-GC/MS with and without TMAH methylation
2006
Abstract High molecular weight (HMW) fractions (MW > 1000) of effluents were obtained by ultrafiltration of elemental chlorine-free (ECF) bleaching (O-D-EOP-D-ED) and totally chlorine-free (TCF) bleaching (O-Z-Q-P-Z-Q-P-P) liquors of softwood (Pinus sylvestris) pulp. The fractions were studied by analytical pyrolysis coupled to gas chromatography/mass spectrometry (Py-GC/MS) with and without TMAH (tetramethyl ammonium hydroxide) derivatization. The pyrograms showed a number of pyrolysis products mainly derived from lignin and carbohydrates. The comparison of 4-hydroxyphenyl (H), guaiacyl (G) and syringyl (S) lignin units in both bleaching effluents showed that the G unit content was clearly…
Aerobic granular sludge treating shipboard slop: Analysis of total petroleum hydrocarbons loading rates on performances and stability
2018
Abstract The work focuses on the feasibility of treating slop with aerobic granular sludge. For this purpose, a 3.5 L granular sequencing batch reactor was activated and it was monitored for 156 days. The experimental campaign was divided into two periods, named Period I (100 days) and Period II (56 days). Total Petroleum Hydrocarbon (TPH) concentration in the slop was, on average, equal to 6.8 ± 1.5 mg L−1 and 13 ± 1.5 mg L−1 in Period I and Period II respectively. The obtained results during the first experimental period indicated that about 80 days were required to reach steady state with mature granules, when TPHs removal efficiency was approximately 90%. The results indicated that both…
Cultivation of granular sludge with hypersaline oily wastewater
2015
The time required to stabilise mature aerobic granules is rather variable. In addition, cultivation time and the structural characteristics of granules seem to be related to the nature of wastewater influent. Granular sludge has been used for the treatment of several industrial wastewaters, but nothing has been reported about wastewater characterized by the simultaneous presence of hydrocarbons and high chloride concentration. In this work, the authors analysed the granulation process and performance as well as the physical characteristics of aerobic granules in two Granular Sequencing Batch Airlift Reactors (GSBARs), fed with acetate-based synthetic wastewater in reactor 1 (R1) and with a …
Antioxidant capacity in fruit of Citrus cultivars with marked differences in pulp coloration: Contribution of carotenoids and vitamin C.
2020
The purpose of this study was to evaluate the specific contribution of carotenoids and vitamin C to the lipophilic and hydrophilic antioxidant capacity, respectively, of the pulp of citrus fruits using the genetic diversity in pigmentation and in the carotenoid complement. To this end, six citrus varieties were selected: two mandarins, Clemenules (Citrus clementina) and Nadorcott (C. reticulata); two grapefruits (C. paradisi), Marsh and Star Ruby; and two sweet oranges (C. sinensis), Valencia late and Valencia Ruby. Total carotenoid content and composition in the pulp of fruits were very different, in relation to their color singularities. Valencia Ruby and Nadorcott had the highest caroten…
Aerobic granular sludge treating high strength citrus wastewater: Analysis of pH and organic loading rate effect on kinetics, performance and stabili…
2017
Abstract In the present paper, the feasibility of citrus wastewater treatment with aerobic granular sludge sequencing batch reactors (AGSBR) was investigated. Two AGSBRs (named R1 and R2, respectively) were operated for 90 days under different organic loading rates (OLR) and pH in two experimental periods. The OLR ranged approximately between 3.0 kg TCOD m−3d−1 and 7 kg TCOD m−3d−1 during Period I, whereas between 7 kg TCOD m−3d−1 and 15 kg TCOD m−3d−1 during Period II. pH was maintained at 7.0 and 5.5 in R1 and R2, respectively. The results revealed that under high OLR and unbalanced feast/famine regime (Period I), the development of fast-growing microorganisms (fungi and filamentous bacte…
Anaerobic thermophilic (55°C) treatment of TMP whitewater in reactors based on biomass attachment and entrapment
1999
Abstract Thermomechanical pulping (TMP) whitewater was treated in thermophilic (55°C) anaerobic laboratory-scale reactors using three different reactor configurations. In all reactors up to 70 % COD removals were achieved. The anaerobic hybrid reactor, composed of an upflow anaerobic sludge blanket (UASB) and a filter, gave degradation rates up to 10 kg COD/m 3 d at loading rates of 15 kg COD/m 3 d and hydraulic retention time (HRT) of 3.1 hours. The anaerobic multi-stage reactor, consisting of three compartments, each packed with granular sludge and carrier elements, gave degradation rates up to 9 kg COD/m 3 d at loading rates of 15–16 kg COD/m 3 d, and HRT down to 2.6 hours. Clogging and …
Start-up with or without inoculum? Analysis of an SMBR pilot plant.
2010
This study analysed a submerged membrane bioreactor (SMBR) start-up with the purpose of determining the best conditions to carry it out. In order to do this, a hollow fibre membrane module was installed in a submerged configuration in a pilot aerobic reactor. The experiment was then divided in two phases, lasting 65 days each. During phase 1, the pilot plant was started-up without inoculum of activated sludge and no sludge, withdrawal was performed. Conversely, in phase 2, the MBR pilot plant was started-up with sludge inoculum and the sludge concentration was kept constant. In both phases, the volumetric loading rate applied to the pilot plant was kept constant. The authors analysed the di…
Alkali-activated mortars for sustainable construction material: effects of binder-to-aggregate ratio and curing conditions
2019
Valorisation and reuse of industrial wastes has become a worldwide compelling topic to improve the sustainability of processes and materials. This paper discusses an alternative way to recycle the biomass fly ash, generated by the kraft pulp industry, to manufacture novel geopolymeric mortars intended for applications in construction. Biomass fly ash was used as a raw material, in partial substitution of the commonly used metakaolin, natural siliceous sand as aggregate. The followed manufacture process is highly simple and reproducible. Various proportions binder to aggregate were tested to study the effect on the final mortars properties. The mortars mechanical resistance was also studied …