Search results for "PULP"
showing 10 items of 717 documents
Assisted reverse electrodialysis for CO2 electrochemical conversion and treatment of wastewater: A new approach towards more eco-friendly processes u…
2020
Abstract In this paper, the utilization of assisted reverse electrodialysis (A-RED), recently used for pre-desalination, is proposed as a general method to reduce the energy requirements of electrolysis processes and evaluated for two model processes: (i) the cathodic conversion of carbon dioxide to formic acid; (ii) the anodic treatment of water contaminated by organics. In A-RED, two solutions with different salt content and an external potential difference, applied in the direction of the natural salinity gradient, are both used to drive redox processes. It was shown, for the first time, that the cathodic conversion of CO2 to formic acid can be performed by both reverse electrodialysis (…
COMPOSITION OF REFUSE DERIVED FUELS IN LATVIA AND ESTONIA IN COMPARISION WITH WORLDWIDE AVERAGE VALUES
2019
Information about composition of RDF worldwide was collected using literature analysis. RDF samples produced in Latvia and Estonia were collected, those fractional and elemental composition analyzed using standard methods. Comparing obtained results with worldwide data we have found that the quality of local RDFs in general is higher than typical values, while elevated content of chlorine must be mentioned as a problem. Results also show that majority of chlorine in studied samples exists in organic form. Recommendations to overcome this problem have been developed.
Dentist´s knowledge, attitudes and determining factors of the conservative approach in teeth with reversible pulpitis and deep caries lesions
2018
Background The aim of this study was to investigate dentists` knowledge, attitudes and factors regarding the conservative approach in the management of deep caries lesions (DCLs) in teeth with reversible pulpitis. Material and methods 187 dentists were contacted directly or by mail, and 125 (67%) were finally included in the study. Dentists were requested to answer an open/discursive questionnaire about the routine approach to the diagnosis and treatment of DCLs, including knowledge-related attitudinal items. Results Total caries excavation was the preferred treatment option for more than 80% of dentists in case of DCL with reversible pulpitis. Only a small percentage (8%) chose partial car…
Dental anatomy portrayed with microscopic volume investigations
1993
The clinical treatment of the root canal of teeth--called endodontics--assumes a precise idea of the spatial arrangement of the anatomy of teeth and their inner structure. By using computer-assisted data acquisition from filmed sequences of histologic serial sections and a special kind of magnetic resonance microscope--the Stray Field Imaging (STRAFI)--volume investigations were carried out using special functions of a newly developed 3D software. Possible applications and future perspectives are discussed.
Industrial ecology of the paper industry
1999
Industrial ecology (IE) is a biological concept applied to industrial structures. The basic concepts of IE include regional, intra-firm and product-based waste recycling systems as well as the principle of upward and downward cascading. In best current examples of regional systems, several parties are in an industrial waste re-use symbiosis. Paper industry has learned to arrange the recovery and re-use of its products on distant markets, even up to a level where indications of exceeding optimal recovery and re-use rates already exist through deteriorated fibre and product quality. Such occurrences will take place in certain legislative-economic situations. Paper industry has many cascade le…
<title>Tradeoff between environmental impacts and economic benefits?: A case study of the Finnish and British pulp and paper industries</tit…
2001
Due to the increased used paper collection rates in Western Europe, more recycled fibre will be used in the manufacture of paper. This will affect both the environmental and economic performance of the pulp and paper industry. The potential for the increase of the collection rate varies significantly in different countries in western Europe. In some countries the collection rate is already close to 70% (Austria, Germany) and in others it is around 45% (Italy, United Kingdom). With the increased demand for recycled fibre also the collection will increase. When the collection of waste paper is increased something has to be done with the collected paper. Different utilisation modes results in …
Research on Evolution and the Global History of Pulp and Paper Industry: An Introduction
2012
The underlying assumption in the economic history of industries is the deterministic nature of the industry life cycle. That is, industries are assumed to follow a specific life cycle characterized by stages of nascence, growth, maturity and decline apparent in firm numbers, production volume and technological activity. This introduction gives an overview to the theme of this volume: the analysis of the birth, growth, maturity, and finally the decline of the mechanized pulp and paper industry from its inception in the early nineteenth century Europe to its current situation and future prospects in developing markets in Southern America and other regions.
Assessing the gasification potential of five woodchips species by employing a lab-scale fixed-bed downdraft reactor
2015
Abstract This paper is aimed to assess the performance of air blown fixed-bed downdraft gasification of local lignocellulosic biomasses which in perspective of Southern Norway are both available and sustainable. Long rotation forest crops birch, oak and spruce, coupled with energy crops poplar and willow were used as feedstocks. The gasification conditions undertaken were widely varied in-terms of air (∼3.20–4.20 N m3/h) and fuel flow (∼1.70–2.10 kg/h) so that the corresponding equivalence ratio (ER) differed (0.19–0.80) and ultimately reflected to other operational parameters such as bed temperature (∼550–760 °C maximum), producer gas yield (∼1.50–2.30 N m3/kg, wet base), cold gas efficien…
<title>Effects of technological developments in paper manufacturing and recycling: a case study of the Finnish pulp and paper industry</titl…
2001
Technological development is seen as one of the fundamental forces in shaping the modern economies. The effects and the role of technological development are also central questions in many issues of environmental protection. This paper presents the results of a life cycle assessment study of the Finnish pulp an paper industry. Three comparative scenarios are drawn. Two scenarios describe the technological levels and production volumes of 1993 and 1997. A comparison scenario with the production volumes of 1997 and the technological level of 1997 describes the effects avoided by improvements. The results demonstrate that technological development has had considerable effects on the material f…
Mass loading, distribution, and removal of antibiotics and antiretroviral drugs in selected wastewater treatment plants in Kenya.
2020
The discharge of active pharmaceutical ingredients (APIs) into the aquatic environment from wastewater effluents is a concern in many countries. Although many studies have been conducted to evaluate the APIs removal efficiencies and emissions to the environment in wastewater treatment plants (WWTPs), most of these studies considered the aqueous and sludge phases, disregarding the suspended particulate matter (SPM) phase. To try to understand the role of the SPM, the occurrence of five most common antibiotics and three antiretroviral drugs (ARVDs) commonly used in Kenya were investigated in this study. APIs partitioning and mass loading in influents and effluents of three different WWTPs: tr…