Search results for "PULP"
showing 10 items of 717 documents
Pyrolysis of Tall Oil-Derived Fatty and Resin Acid Mixtures
2012
Neutralised mixtures of tall oil-derived fatty acids and resin acids were separately pyrolysed (at 750∘C for 20 s) by pyrolysis gas chromatography with mass-selective and flame ionisation detection (Py-GC/MSD/FID) to clarify their thermochemical behaviour. The pyrolysate of fatty acid salts characteristically contained high amounts of unsaturated aliphatic hydrocarbons and minor amounts of monoaromatics, whereas the pyrolysis of resin acid salts mainly resulted in the formation of aromatics with up to three benzene rings and only in very low amounts of aliphatic hydrocarbons. The data obtained are useful when considering the suitability of various tall oil products containing fatty and resi…
Potato pulp as a composting substrate
2014
Potato pulp is a waste, which is produced in considerable quantities by starch manufacturing industry. Addition of pulp fibre residue to soil results in beneficial effects on soil physical and biochemical properties. In this study, organic potato pulp was mixed with organic grass in three concentrations (75:25 (A), 50:50 (B) and 25:75 (C) % w/w) with the aim of comparing the dynamics of the composting process during a 30-day period. A mini-field experiment was conducted in 0.7 m 3 windrows which were left without covering and additional mixing during composting process, except sampling procedure. During 30-days’ experiment the C:N ratio decreased from 25÷30 to 13÷17 indicating the active co…
Electrochemical technology for the treatment of real washing machine effluent at pre-pilot plant scale by using active and non-active anodes
2018
Abstract Real effluent of washing machine is one of the major sources of microplastics and fabrics in municipal and surface water. The effluents constitute large volume of wastewater with different surfactants since every household and industries nowadays use washing machine rather than traditional hand washing. In this work, a real effluent of washing machine was treated by electrooxidation (EO) in a pre-pilot plant scale electrochemical flow reactor using active (Ti/Pt) or non-active (boron doped diamond (BDD)) anodes and Ti cathode. The effect of anode material (Ti/Pt or BDD) and the applied current density (16.6, 33.3 and 66.6 mA cm−2) on the decay of the organic matter, in terms of che…
Hydrothermal liquefaction of waste biomass in stirred reactors: One step forward to the integral valorization of municipal sludge
2020
Abstract Hydrothermal liquefaction (HTL) of municipal sludge (MS) was performed at 350 °C for 30 min (subcritical water) and at 400 °C for 0 min (supercritical water) at fixed kinetic severity (LogR0 = 8.9) in static and stirred batch reactors to study the effect of the flow regime on the energy recovery (ER) of the process and on the quality of the products. With adopted experimental procedures it was possible to reduce to less than 10% the yield of lost organic compounds, termed volatiles (VT), and to collect and quantify a liquid hydrocarbon fraction (HC) separated from the biocrude (BC). The highest value of the HC yield, 25% w/w, was obtained in supercritical conditions. The C content …
Exploring the limits of anaerobic biodegradability of urban wastewater by AnMBR technology
2018
[EN] Anaerobic membrane bioreactors (AnMBRs) can achieve maximum energy recovery from urban wastewater (UWW) by converting influent COD into methane. The aim of this study was to assess the anaerobic biodegradability limits of urban wastewater with AnMBR technology by studying the possible degradation of the organic matter considered as non-biodegradable as observed in aerobic membrane bioreactors operated at very high sludge retention times. For this, the results obtained in an AnMBR pilot plant operated at very high SRT (140 days) treating sulfate-rich urban wastewater were compared with those previously obtained with the system operating at lower SRT (29 to 70 days). At 140 days SRT the …
Extreme thermophilic (70°C), VFA-fed UASB reactor: performance, temperature response, load potential and comparison with 35 and 55°C UASB reactors
1999
Abstract The paper evaluates the reactor performance, load potential and temperature response of a 70°C, VFAs-fed UASB reactor, seeded with mesophilic granular sludge. Batch experiments were, in addition, conducted to assess the effect of temperature on the achievable residual VFAs in the 70°C effluent. The performance of similarly-fed and seeded 35 and 55°C UASB reactors was also tested. At a short HRT (2–3 h) and a moderate VLR of 12–20 g COD l−1 d−1, the 70°C UASB achieved 66–74% VFAs removal (acetate and butyrate 84–90%, propionate
Design of nutrient removal activated sludge systems
2003
A mechanistic mathematical model for nutrient and organic matter removal was used to describe the behavior of a nitrification denitrification enhanced biological phosphorus removal (NDEBPR) system. This model was implemented in a user-friendly software DESASS (design and simulation of activated sludge systems). A 484-L pilot plant was operated to verify the model results. The pilot plant was operated for three years over three different sludge ages. The validity of the model was confirmed with data from the pilot plant. Also, the utility of DESASS as a valuable tool for designing NDEBPR systems was confirmed.
Organic chlorine compounds in lake sediments. II Organically bound chlorine
1990
Abstract Organically bound chlorine together with inorganic chloride was measured from dated bottom sediment layers of 18 lakes in Central Finland and compared to organic matter contents. Pulp mills were found to be the source of significant increase of the accumulation of all of these materials in the 20th century.
Biofiltration of ethylbenzene vapours: influence of the packing material.
2006
In order to investigate suitable packing materials, a soil amendment composed of granular high mineralized peat (35% organic content) locally available has been evaluated as carrier material for biofiltration of volatile organic compounds in air by comparison with a fibrous peat (95% organic content). Both supports were tested to eliminate ethylbenzene from air streams in laboratory-scale reactors inoculated with a two-month conditioned culture. In pseudo-steady state operation, experiments at various ethylbenzene inlet loads (ILs) were carried out. Maximum elimination capacity of about 120 g m(-3) h(-1) for an IL of 135 g m(-3) h(-1) was obtained for the fibrous peat. The soil amendment re…
Characterization and Reprocessing of Greenhouse Films.
2001
Films for greenhouses are an attractive source of post-consumer plastic materials because they are mainly made of polyethylene and can be easily collected in large amounts in small zones. The types of polymers for this application are, however, increasing and the films contain not only additives and stabilisers, but also fertiliser and pesticide residues. Finally, the extent of photooxidative degradation undergone during the use can strongly influence the recycling operations and the final properties of the secondary material. In this work, a complete characterisation of post-consumer films for greenhouses has been carried out and the properties of the recycled material have been correlated…