Search results for "Particle Size"
showing 10 items of 631 documents
Mechanical properties of recycled polyethylene ecocomposites filled with natural organic fillers
2006
The use of natural organic fillers in addition to postconsumer recycled polymers is getting a growing interest during the last years; this is due to many advantages they can provide in terms of cost, aesthetic properties, environmental impact. In this work, several types of wood flour (differing each other with regard to production source and particle size) were added to a recycled polyethylene coming from films for greenhouses and the effects of filler type, content, and size were investigated. Investigation was then focused on the improvement of mechanical properties, through the addition of polar copolymers (ethylene-co-acrylic acid, ethylene-vinyl acetate) and a maleic anhydride-grafted…
Self-Diffusion in Concentrated Colloid Suspensions Studied by Digital Video Microscopy of Core−Shell Tracer Particles
1998
Optical video microscopy and digital image processing have been used to study the self-diffusion of colloidal particles with a hard-sphere potential. The colloid particles consist of cross-linked polymers and are dispersed in a good solvent to avoid aggregation. To investigate single particle motion in highly concentrated dispersions, a host−tracer system, consisting of two different kinds of polymer particles, has been designed: the host particles are made of poly-t-butylacrylate (with ethanedioldiacrylate as cross-linker) and have the same refractive index as the employed solvent, 4-fluorotoluene. The tracer particles have a core−shell structure with a polystyrene core (cross-linked with…
The fractal calibration method applied to the characterization of polymers in solvent mixtures and in mixed gel packings by SEC.
2007
The size-exclusion chromatographic (SEC) behaviour of different solvent/polymer systems in three packing sets has been analysed from fractal considerations. The three-column sets studied are specifically formed by: (i) 'pure' micro-styragel, (ii) 'mixed' TSK Gel H(HR + XL + HR) and (iii) mixed TSK Gel H(XL + HR + XL). The experimental data reveals that in most of the systems assayed the classical universal calibration (UC) is not fulfilled, denoting the existence of secondary effects accompanying the main SEC mechanism. In order to obtain an accurate characterization of different polymers eluted in solvent mixtures and/or mixed packings, the use of a reliable and trusted calibration curve i…
Optically active amphiphilic hyperbranched polyglycerols as templates for palladium nanoparticles
2006
Abstract We report a systematic study on the encapsulation of palladium nanoparticles in optically active amphiphilic hyperbranched polyglycerols with different optical signs and different degrees of polymerization, namely (−)-P(G 40 C16 0.5 ) 1 and (+)-P(G 73 C16 0.5 ) 2 . Several issues have been addressed here: (a) relatively wide size distributions (1–5 nm) of palladium nanoparticles have been achieved, (b) a remarkable template effect ( 1 , DP n = 40, 1.2 ± 0.1 nm; 2 , DP n = 73, 2.3 ± 0.1 nm average particle size) has been observed using TEM technique, as shown by the particle size dependent on the degree of polymerization of the polymers, (c) NaBH 4 is found to be a convenient redu…
Surface-Functionalized Latex Particles as Controlling Agents for the Mineralization of Zinc Oxide in Aqueous Medium
2005
Polystyrene latex particles modified at the surface with different hydrophilic functional groups were prepared by miniemulsion polymerization and used as controlling agents in the crystallization of zinc oxide from aqueous medium. The effects of the chemical nature of the surface functionalization and the latex concentration on the crystal growth, morphology, and crystalline structure of the resulting zinc oxide were analyzed. Micro- and submicrosized crystals with a broad variety of morphologies depending on the functionalization were obtained. Among the different latexes studied, the acrylic-acid-derived particles were shown to be a convenient system for further quantitative investigation…
Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts.
2004
Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)-imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions p…
Some Aspects of the Influence of Particle Size on Properties and Behaviour of a Dielectric Material : Example of Barium Titanate
1989
Anybody agrees with the idea that particle size plays an important role in the behaviour of a polycrystalline material but very few studies are giving precise information about this role. In this paper some experimental results are presented succintly to illustrate the importance of this physico-chemical factor. They are related to barium titanate, the main component of the dielectric material in the type II ceramic capacitors.
Influence of synthesis conditions on the morphology of Dodecasil 1H
1993
Abstract The synthesis of Dodecasil 1H was studied in the system SiO2/1-adamantylamin/NH3/water with the objective of controlling the particle size and the morphology of the crystals. Since nucleation occurs in a very early stage of the synthesis, the heating rate to the final temperature and/or holding points during heat up have a strong influence on both parameters. Crystals smaller than 150 μm could only be obtained by the use of seed crystals, which are completely consumed in the synthesis with subsequent new nucleation. Using seed crystals, the expensive template 1-adamantylamine can be substituted with cheaper reagents such as sodium dodecyl sulfate or trimethylethylammonium bromide a…
Increased conformational rigidity of humic substances by oxidative biomimetic catalysis
2005
A synthetic water-soluble meso-tetra(2,6-dichloro-3-sulfonatophenyl)porphyrinate of iron(III) chloride, Fe(TDCPPS)Cl, was employed as a biomimetic catalyst in the oxidative coupling of terrestrial humic materials. High-performance size-exclusion chromatography (HPSEC), solid-state nuclear magnetic resonance (CPMAS-(13)C NMR), electron paramagnetic resonance (EPR), and diffuse reflectance infrared spectroscopy (DRIFT) were used to follow conformational and structural changes brought about in different humic materials by the oxidative coupling. Increase in apparent weight-average molecular weight (Mw(a)) occurred invariably for all humic substances with the oxidative polymerization catalyzed …
Spacers and Valved Holding Chambers—The Risk of Switching to Different Chambers
2020
© 2020 The Authors. Published by Elsevier Inc. on behalf of the American Academy of Allergy, Asthma & Immunology. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)