Search results for "Particle-Size"
showing 10 items of 97 documents
Pyrolysis-gas chromatography/mass spectrometry of soil organic matter extracted from a Brazilian mangrove and Spanish salt marshes
2009
The soil organic matter (SOM) extracted under different vegetation types from a Brazilian mangrove (Pai Matos Island, São Paulo State) and from three Spanish salt marshes (Betanzos Ría and Corrubedo Natural Parks, Galícia, and the Albufera Natural Park, Valencia) was investigated by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). The chemical variation was larger in SOM from the Spanish marshes than in the SOM of the Brazilian mangroves, possibly because the marshes included sites with both tidal and nontidal variation, whereas the mangrove forest underwent just tidal variation. Thus, plant-derived organic matter was better preserved under permanently anoxic environments. Moreove…
Elucidating the Effect of Bimodal Grain Size Distribution on Plasticity and Fracture Behavior of Polycrystalline Materials
2020
The refinement of grains in a polycrystalline material leads to an increase in strength but as a counterpart to a decrease in elongation to fracture. Different routes are proposed in the literature to try to overpass this strength-ductility dilemma, based on the combination of grains with highly contrasted sizes. In the simplest concept, coarse grains are used to provide relaxation locations for the highly stressed fine grains. In this work, a model bimodal polycrystalline system with a single coarse grain embedded in a matrix of fine grains is considered. Numerical full-field micro-mechanical analyses are performed to characterize the impact of this coarse grain on the stress-strain const…
Friction Factor for Gravel-Bed Channel with High Boulder Concentration
2000
This paper reports the results of an experimental investigation on flow resistance law for a gravel-bed channel having bed arrangements characterized by different values of the number of boulders. The dependence is studied of a parameter, proposed for describing the gravel-bed surfaces, on the boulder concentration and on the ratio between the median diameter of the coarser particles and the median diameter of the bed layer. Flume measurements carried out for the hydraulic condition of \Itransition\N and \Ilarge-scale\N roughness (1.5 ≤ \ih/\id\d5\d0 ≤ 6.9) show that the intercept of the semilogarithmic flow resistance law depends on the ratio and on boulder concentration. For concentration…
The Grinding Resistance of the Wheat Grain Related to the Grinding Degree For The First Break In The Wheat Milling
2011
Breakage of wheat grain during first break roller milling depends on the characteristics of the wheat (including the distributions of kernel size, hardness and moisture content) and on the design and operation of the roller mill (including roll speeds and differential, roll disposition, fluting profile, number of flutes, fluting spiral, roll gap, the degree of roll wear and the feed rate). The effects of these factors are manifest in the particle size distribution exiting first break, the compositional distribution of those particles (as large particles tend to be richer in bran, while small particles are pure endosperm), the power required to mill the wheat and the rate of roll wear. For t…
Influence of mechanical activation on the physical stability of salbutamol sulphate.
2003
Abstract In order to obtain the optimal particle size distribution for pharmaceutical powders in dry powder inhalers the particles have to be micronised. In most cases the process of micronisation is connected with a high input of energy which induces disorder and defects on the surface of the drug particles and as a result changes in the crystallinity. Consequently, changes in the physical stability of the powders may occur. To investigate changes on the physical stability of the powder, different analytical methods are used in the present investigation: laser diffraction, Differential Scanning Calorimetry (DSC), isothermal microcalorimetry and DVS-method. Air-jet-milling is one of the mos…
Impact of excipient choice on the aerodynamic performance of inhalable spray-freeze-dried powders
2020
Abstract Spray-freeze-drying (SFD) is a process in which a solution is dispersed into a freezing medium and dried by sublimation, resulting in lyophilized powders with spherical particles. This study aims at screening and evaluating the impact of the excipient choice and spray solution characteristics in SFD on the physico-chemical characteristics of lyospheres and rate their suitability for producing pulmonary applicable powders using a novel SFD method. A monodisperse droplet-stream was injected into a vortex of cold gas for the production of inhalable, uniform spherical lyophilisates with a narrow particle size distribution. Model solutions containing graded contents (0.3%, 1.0%, and 3.0…
Evolution of grain-size distribution of pumice sands in 1-D compression
2016
Abstract Crushing is one of the micromechanisms that govern the mechanical behaviour of sands at medium-high stresses. It depends on mineralogy, form and strength of single particle, mean stress level, coordination number, time, etc.. It causes changes of grain-size distribution, porosity, number and type of grain contacts, fabric, structure of the material, etc.. Results of an experimental research on the crushing of pumice sands compressed under 1-D conditions to vertical effective stresses σ′v up to 100MPa are reported here. They show marked crushing already at σ′v of about 200kPa. The evolution of the grain-size distribution can be represented by ΔDi= h/(K(1+C exp(–hlgσ′v))) in which ΔD…
Influence of sintering temperature on microstructure of Na0.5Bi0.5TiO3 ceramics
2021
Abstract Na0.5Bi0.5TiO3 (NBT)-based compositions are among the most promising lead-free ferroelectrics. Although studies of modification of NBT-based compositions’ properties are a hot topic, there has been very little attention paid to their characterization from the standpoint of ceramics and the process of producing them. Here, we report on comprehensive analysis of the influence of sintering temperature across a wide temperature range (1020–1240 °C) on the complete microstructure and chemical content of NBT ceramics produced by solid state sintering, which is dominating in producing of NBT ceramics. Thorough attention is paid to the grain size distribution, porosity, and inhomogeneity. …
Control of grain size and morphologies of nanograined ferrites by adaptation of the synthesis route: mechanosynthesis and soft chemistry
2003
Abstract Nanocrystalline Fe-based spinels with composition Fe 2.5 Ti 0.5 O 4 can be synthesized using two different routes: soft chemistry and high-energy ball milling. This paper is focussed on the fact that each type of synthesis process can lead to powders with a crystallite size of about 15 nm but with significant differences in the grain size distribution and the agglomeration state. Whereas in the case of mechanosynthesis, the ball-milled powders consist of aggregates, those obtained by soft chemistry are very well dispersed. Moreover the chosen investigated nanopowders present a blocked/superparamagnetic transition depending on the grain size. The grain size morphologies obtained by …
Characteristics of LiFePO4 obtained through a one step continuous hydrothermal synthesis process working in supercritical water
2009
International audience; The olivine-like material LiFePO4 was prepared via a continuous hydrothermal synthesis process working from subcritical to supercritical water conditions. The influence of some processing parameters–temperature and reaction time–was investigated in terms of material purity, grain size and morphology. Supercritical conditions were found to be attractive to synthesize in one step a well-crystallized material without impurities. The primary particles size was in the nanometric range. They showed a natural tendency to form micron size agglomerates, which were supposed to be the cause of the limited capacity, as demonstrated through a cross study using laser particle size…