Search results for "Particle-Size"
showing 10 items of 97 documents
The Residual Shear Strength of the Shaly and Sandy Facies of the Opalinus Clay
2018
The paper presents a comprehensive laboratory campaign carried out with the aim to asses the residual strength of the Opalinus Clay. Ring shear tests with vertical effective stress up to 1 MPa were performed on remoulded samples of two different facies of the Opalinus Clay. Test results show that the «Shaly» facies is characterized by a low range of variation of residual strength while the strength of the «Sandy» facies is very sensitive to the variation of grain size distribution. Microstructural analyses (SEM) suggest that the difference in the observed mechanical behavior of the two facies can be related to different particles arrangements along the shear surfaces.
The organic carbon derived from sewage sludge as a key parameter determining the fate of trace metals.
2007
8 pages; International audience; In a sandy agricultural soil of south-west of France, continuously cultivated with maize and amended with sewage-sludge over 20 years, the behavior of three trace metals (Cu, Pb, and Zn) was studied during the sludge applications (1974-1993) and after its cessation (1993-1998). Using the delta13C analysis, the dynamics of different sources of organic matter were followed in order to elucidate the influence of the sludge-derived organic matter on the fate of trace metals in the soil and its particle size fractions. This study revealed that sludge-derived organic matter contributed to the formation of macroaggregates through the binding of preexisting microagg…
Degradation of silica particles functionalised with essential oil components under simulated physiological conditions
2020
[EN] In this work, the biodurability of three silica particle types (synthetic amourphous silica, MCM-41 microparticles, MCM-41 nanoparticles) functionalised with three different essential oil components (carvacrol, eugenol, vanillin) was studied under conditions that represented the human gastrointestinal tract and lysosomal fluid. The effect of particle type, surface immobilised component and mass quantity on the physico-chemical properties of particles and silicon dissolution was determined. Exposure to biological fluids did not bring about changes in the zeta potential values or particle size distribution of the bare or functionalised materials, but the in vitro digestion process partia…
Plasmonic Focusing Reduces Ensemble Linewidth of Silver-Coated Gold Nanorods
2008
Silver coating gold nanorods reduces the ensemble plasmon line width by changing the relation connecting particle shape and plasmon resonance wavelength. This change, we term "plasmonic focusing", leads to less variation of resonance wavelengths for the same particle size distribution. We also find smaller single particle linewidth comparing resonances at the same wavelength but show that this does not contribute to the ensemble linewidth narrowing.
2013
Abstract. As part of the CLACE-6 campaign we performed size-resolved CCN measurements for a~supersaturation range of S = 0.079 % to 0.66% at the high-alpine research station Jungfraujoch, Switzerland, in March~2007. The derived effective hygroscopicity parameter κ describing the influence of particle composition on CCN activity was on average 0.23–0.30 for Aitken (50–100 nm) and 0.32–0.43 for accumulation mode particles (100–200 nm). The campaign average value of κ = 0.3 is similar to the average value of κ for other continental locations. When air masses came from southeasterly directions crossing the Po Valley in Italy, particles were much more hygroscopic (κ ≈ 0.42) due to…
Balances for Special Applications
2014
Some special applications and the corresponding balances are described in detail: laboratory balances, micro balances vacuum balances, thermo balances, magnetic suspension balances, oscillators, metrological comparators, tensiometer, suspended particles and elementary charge, mass analyser, density determination, particle analysis, magnetic susceptibility, post office and coin scales, body scales, and gravimeter. Vacuum equipment for balances, thermogravimetry, sorptometry, hygrometry, and moisture determination, gravimetric measurement of reaction kinetics, surface tension, ion traps, pyknometry, dust and particle concentration, grain size analysis are described. Gravimetric measurement of…
Assessment of soil particle erodibility and sediment trapping using check dams in small semi-arid catchments
2017
Check dams can be used as a source of information for studies on sediment characteristics and soil particle erodibility. In this study, sediment yield and grain size distribution (GSD) were measured in twenty small catchments draining into a rock check dam in NW Iran for different runoffs during 2010–2011. Significant correlations were found between sediment yield and slope steepness, vegetation cover and soil erodibility factor (K) of the catchments. The erodibility of soil particles was determined using the comparison of GSD between sediment and original soil. Clay was the most erodible soil particle which showed 2.05 times more percentage in sediment than the original soil. The erodibili…
Climatology of the average water-soluble volume fraction of atmospheric aerosol
2007
The average water-soluble volume fraction of atmospheric aerosol particles was inferred from measurements at three different locations across Central Europe. Together with a comprehensive literature review these data sets are classified into four aerosol types. The classified data are parameterized as a function of particle size using a logarithmic normal distribution function, which seems most appropriate to represent the hygroscopicity maximum in the accumulation size range. This parameterization can be used as a simplified input parameter for various model calculations. In addition, a summary on water-soluble volume fractions and hygroscopic growth factors is presented along with a short…
Modelling the optical properties of fresh biomass burning aerosol produced in a smoke chamber: results from the EFEU campaign
2007
A better characterisation of the optical properties of biomass burning aerosol as a function of the burning conditions is required in order to quantify their effects on climate and atmospheric chemistry. Controlled laboratory combustion experiments with different fuel types were carried out at the combustion facility of the Max Planck Institute for Chemistry (Mainz, Germany) as part of the "Impact of Vegetation Fires on the Composition and Circulation of the Atmosphere" (EFEU) project. The combustion conditions were monitored with concomitant CO<sub>2</sub> and CO measurements. The mass scattering efficiencies of 8.9&plusmn;0.2 m<sup>2</sup> g<sup>…
Influence of HCl pretreatment and organo-mineral complexes on laser diffraction measurement of loess–paleosol-sequences
2016
Abstract The influence of different sample pretreatment methods on grain size distributions in particle size analysis has been subject to controversial discussions. Standard sample preparation typically comprises the disaggregation of aggregated and agglomerated particles into single primary particles, i.e., the organic binding material is oxidized by hydrogen peroxide (H2O2) and the contained carbonates are dissolved by hydrochloric acid (HCl). The aim of this study is to evaluate the effects of HCl treatment on grain size analyses of Late Pleistocene and Holocene loess–paleosol-sequences investigated by a Beckman Coulter LS 13320 laser particle analyzer. For this purpose, samples from two…