Search results for "Pension"
showing 10 items of 513 documents
Numerical Reconstruction of Porous Architecture for Suspension Plasma Sprayed Coatings
2021
Abstract The porous architecture of coatings has a significant influence on the coating performances and thus should be properly designed for the intended applications. For simulating the coating properties, it is necessary to determine the numerical representation of the coating microstructure. In this study, YSZ coatings were manufactured by suspension plasma spray (SPS). Afterwards, the porous architecture of as-prepared coatings was investigated by the combination of three techniques, imaging analysis, Ultra Small Angle X-ray Scattering (USAXS), and X-ray transmission. A microstructural model for reconstructing the porous architecture of the SPS coating was subsequently computed accordi…
Online measurement of floc size, viscosity, and consistency of cellulose microfibril suspensions with optical coherence tomography
2021
AbstractIn this study, cellulose microfibril (CMF) suspensions were imaged during pipe flow at consistencies of 0.4%, 1.0%, and 1.6% with optical coherence tomography (OCT) to obtain images of the structure and the local velocity of the suspension. The viscosities obtained by combining pressure loss measurement with the OCT velocity data showed typical shear thinning behavior and were in excellent agreement with viscosities obtained with ultrasound velocity profiling. The structural OCT images were used to calculate the radial and the axial floc sizes of the suspension. A fit of power law to the geometrical floc size–shear stress data gave the same power law index for all consistencies, sug…
Influence of Rotor Suspension Anisotropy on Oil Film Instability
2018
A crucial problem of turbomachinery is the oil film instability on increasing the angular speed, which is correlated with the asymmetry of the bearing stiffness matrix and resembles the hysteretic instability somehow. As a beneficial effect is exerted on the latter by the anisotropy of the support stiffness, some favorable effects have been recently found by the author also for the former, whence a systematic analysis has been undertaken. The instability thresholds may be detected by the usual conventional methods, but a detailed analysis may be carried out by closed-form procedures in the hypothesis of symmetry of the rotor-shaft-support system, which condition approaches the real working …
Characterization of micro-fibrillated cellulose fiber suspension flow using multi scale velocity profile measurements
2017
Rheological properties and boundary layer flow behavior of Micro Fibrillated Cellulose (MFC) suspended in water was studied using a novel velocity profiling rheometric technique. The method is based on measuring stationary velocity profiles of fluid flow in a straight tube simultaneously by Doppler Optical Coherence Tomography (DOCT) and by Ultrasound Velocity Profiling (UVP). The high resolution DOCT provides velocity profiles near the transparent tube wall, while UVP yields corresponding information in the interior parts of the flow. The data from the two instruments is combined into a comprehensive velocity profile including both the thin boundary layer near the wall and the interior par…
Experiments and CFD Predictions of Solid Particle Distribution in a Vessel Agitated with Four Pitched Blade Turbines
2001
The distribution of solid particles in a high aspect-ratio baffled tank agitated with four 45° pitched blade turbines (PBT) was investigated using both experimental measurements and CFD simulations. Dilute suspensions of glass beads in water and moderately viscous liquids were considered. The measurement of axial particle concentration profiles was conducted by means of a light attenuation technique. Fully predictive simulations of solid-liquid suspensions were performed using a Sliding-Grid approach coupled with the Eulerian-Eulerian Two Fluid Model and the ‘homogeneous’ two-phase k-ɛ turbulence model. The simulated particle axial concentration profiles were compared with the experimental …
Particle suspension in top-covered unbaffled tanks
2010
Abstract Unbaffled stirred tanks are seldom employed in the process industry as they are considered poorer mixers than baffled vessels. However, they may be expected to provide significant advantages in a wide range of applications (e.g. crystallization, food and pharmaceutical processes, etc.), where the presence of baffles is often undesirable. In the present work solid–liquid suspension in an unbaffled stirred tank is investigated. The tank was equipped with a top-cover in order to avoid vortex formation. A novel experimental method (the “steady cone radius method”, SCRM) is proposed to determine experimentally the minimum impeller speed at which solids are completely suspended. Experime…
Dynamic light scattering by rodlike particles: [4] examination of the vanadium(V)-oxide system
1999
The dynamics of a suspension of rodlike particles has been investigated using dynamic light scattering. The sols investigated in this contribution are not monodisperse by nature and age with time. An evaluation of the first cumulant of the autocorrelation functions as a function of scattering vector is expected to yield the dimensions of the particles. While the data can be excellently fitted by the theoretical expressions for freshly prepared sols, we found that the theoretically expected interrelation of the (three) diffusion coefficients is not reproduced, which prohibits the unequivocal determination of the particle dimensions. Aged sols, on the other hand, cannot be described at all wi…
Hiding in plain view: Colloidal self-assembly from polydisperse populations.
2016
We report small-angle x-ray scattering (SAXS) experiments on aqueous dispersions of colloidal silica with a broad monomodal size distribution (polydispersity 18%, size 8 nm). Over a range of volume fractions the silica particles segregate to build first one, then two distinct sets of colloidal crystals. These dispersions thus demonstrate fractional crystallization and multiple-phase (bcc, Laves AB$_2$, liquid) coexistence. Their remarkable ability to build complex crystal structures from a polydisperse population originates from the intermediate-range nature of interparticle forces, and suggests routes for designing self-assembling colloidal crystals from the bottom-up.
Depletion-induced percolation in networks of nanorods.
2006
Above a certain density threshold, suspensions of rod-like colloidal particles form system-spanning networks. Using Monte Carlo simulations, we investigate how the depletion forces caused by spherical particles affect these networks in isotropic suspensions of rods. Although the depletion forces are strongly anisotropic and favor alignment of the rods, the percolation threshold of the rods decreases significantly. The relative size of the effect increases with the aspect ratio of the rods. The structural changes induced in the suspension by the depletant are characterized in detail and the system is compared to an ideal fluid of freely interpenetrable rods.
Researches on the Hydraulic Systems of Actioning the Suspension Mechanisms at Tractors
2010
SUMMARY The agricultural machines are coupled to tractor th rough the suspension mechanism in three points. The actioning of the suspension mechanisms is made by some hydraulic systems, which have the following component parts: tank, pu mp, distributer, valves, hydraulic cylinders, filters and hydraulic prizes. These systems must assure, between others, lifting in a convenient time of the carried machine from the work position to that of transport position, to allow the maintaining of the machine in any intermediary position, between the l owest limited position and the upper limited position and to assure the posibility to th e carried machine to follow the irregularities of the ground dur…