Search results for "Permeability"
showing 10 items of 596 documents
Effect of cavity preparation instruments (oscillating or rotating) on the composite-dentin interface in primary teeth.
2003
Abstract Objectives: To evaluate the effect of preparation of instruments on the interfacial integrity between cavity wall and composite restoration. Methods: Two class II slot preparations were done in 10 primary teeth either with SonicSys® or with a conventional bur. The cavities were filled using an adhesive system. One layer of a flowable composite and one layer of a condensable composite were applied. The specimens were analyzed by confocal laser scanning microscopy. Results: In the SonicSys® group the mean thickness of the hybrid layer was 6.12 (0.60) μm; in the control group it was 6.04 (0.63) μm. The difference was not statistically significant. Two fractures were observed in one to…
Performance Study of Split Ferrite Cores Designed for EMI Suppression on Cables
2020
The ideal procedure to start designing an electronic device is to consider the electromagnetic compatibility (EMC) from the beginning. Even so, EMC problems can appear afterward, especially when the designed system is interconnected with external devices. Thereby, electromagnetic interferences (EMIs) could be transmitted to our device from power cables that interconnect it with an external power source or are connected to another system to establish wired communication. The application of an EMI suppressor such as a sleeve core that encircles the cables is a widely used technique to attenuate EM disturbances. This contribution is focused on the characterization of a variation of this cable …
True and Apparent Oxygen Permeabilities of Contact Lenses
1992
We studied the passage of oxygen through some commercially available contact lenses. Oxygen diffusion coefficients were determined by the time-lag method and a 201T Redher permeometer was used to measure the oxygen permeability and transmissibility by the polarographic method. The measurements were carried out at room temperature with 0.09% sodium chloride physiologic solution. The following types of lenses were tested: (1) 12 lenses of cellulose acetate butyrate (CAB) of a mean thickness of 0.194 mm (observed Dk approximately 6.3 barrers) (1 barrier is equivalent to 10(-11) cm3 of O2 (STP).cm2/cm3.s.mm Hg). (2) 13 lenses of a cross-linked polyhydroxyethyl methacrylate (2-HEMA), manufacture…
Design approach for high efficiency NFC systems with magnetic shielding materials
2020
The performance of a Near Field Communication (NFC) antenna may be diminished when it is placed close to any conductive surface such as a metallic case or a battery. This degradation is caused due to the stray magnetic field created by the eddy currents induced on the surface, which is opposite to the intended field generated by the NFC antenna. One of the first solutions that come to mind to designers when facing this problem is the use of high permeability magnetic shielding based on sintered ferrite sheets. This is a good approach but something that is not generally taken into account is that these materials introduce an additional inductance to the NFC antenna. If the permeability of th…
Porous structure of Purevision™ versus Focus® Night&Day™ and conventional hydrogel contact lenses
2002
The surface and bulk structures of hydrogel contact lenses that contain siloxane moieties, Purevision™ (balafilcon A) and Focus®Night&Day™ (lotrafilcon A), were investigated. Standard hydrogel lenses of low (Seequence®), medium (Acuvue®), and high water content (Precision UV®) were used as controls. All the lenses were dehydrated in a series of ethanol solutions of increased concentration, critical-point dried in CO2, and sputter coated with gold/palladium before they were examined by scanning electron microscopy. Of all lenses examined, only the balafilcon lenses presented, in addition to the polymer network porosity characteristic of all hydrogels, a macroporous structure that was observe…
A Statistical Approach to Permeability of Clustered Fibre Reinforcements
2004
The focus is set on mesoscale modelling of permeability of real fabrics used in composite manufacturing. Of particular interest is the effect of expected perturbations from perfect geometries, such as fibre bundle crimp, on the permeability. To start with, variational methods are used to calculate the permeability of individual gaps between fibre bundles. Based on this study a network of unit cells is formed enabling studies of two-and three-dimensional flow through the structure. From such an analysis the overall permeability of an arbitrary distribution of unit cell permeabilities can be calculated. Here random and controlled distributions are simulated. The former is an approximate repr…
Transport properties of heterogeneous materials. Combining computerised X-ray micro-tomography and direct numerical simulations
2009
Feasibility of a method for finding flow permeability of porous materials, based on combining computerised X-ray micro-tomography and numerical simulations, is assessed. The permeability is found by solving fluid flow through the complex 3D pore structures obtained by tomography for actual material samples. We estimate overall accuracy of the method and compare numerical and experimental results. Factors contributing to uncertainty of the method include numerical error arising from the finite resolution of tomographic images and the rather small sample size available with the present tomographic techniques. The total uncertainty of computed values of permeability is, however, not essentiall…
Carboxymethylation of alkali extracted xylan for preparation of bio-based packaging films
2012
This study describes the synthesis of carboxymethylxylan (CMX) and investigates its suitability as a film for packaging applications. High-purity polymeric xylan was extracted from commercial bleached birch kraft pulp and converted to CMX with three different degrees of substitution (DSs). The water vapor sorption, mechanical, and barrier properties of the films prepared from CMX were tested. Increasing DS of CMX films resulted in an increase in elongation at break and a decrease in tensile strength and Young's modulus. The DS also affected the barrier properties of the films. CMX films with higher DS showed improved (reduced) oxygen permeability (OP), and the water vapor permeability (WVP)…
Dielectric nonlinearity of ferroelectric solid solutions PMN-PZN and PMN-PNN
2001
Abstract Obtaining of novel thin film materials for electrically tuneable capacities is one of the current problems of ferroelectric material application. The most appropriate materials are the ferroelectric lead-containing niobates: PbMg1/3Nb2/3O3 (PMN), PhZn1/3Nb2/3Os (PZN), PbNi1/3Nb2/3O3 (PNN) and their solid solutions were synthesized by solid state reactions at 800–900 °C from oxides. Results of the studies of thermal dependence of dielectric permeability and loss factors of the synthesized solutions are provided together with reciprocal dielectric permeability as function of temperature and electric field intensity. The dielectric characteristics of nonlinear materials are reported e…
Comparison of cellulose nanocrystals obtained by sulfuric acid hydrolysis and ammonium persulfate, to be used as coating on flexible food-packaging m…
2016
Cellulose nanocrystals (CNCs), extracted from trees, plants, or similar cellulose-containing materials, can be used in combination with other materials to improve their performance or introduce new applications. The main purpose of this study was to compare and understand the potentialities, as coatings for Poly(ethylene terephthalate) films, of CNCs obtained starting from the same cotton linters by two different processes: sulfuric acid hydrolysis and a less common treatment with ammonium persulfate (APS), able to provide also a cellulose oxidation. The results showed that CNCs produced through the APS treatment showed higher charge densities, due to the carboxylic groups formed during the…