Search results for "Pesticide"
showing 10 items of 588 documents
Implementing the contamination prevention programs in the pesticide industry by infrared spectroscopy.
2014
Abstract An infrared spectroscopy based methodology has been successfully developed to implement contamination prevention programs in the pesticide industry. Sensitivity of the IR procedure, traditionally considered the Achilles Hell of the technique, has been improved by using a transmission cell with an open upper side, an internal volume of 35 µL and an optical pathlength of 0.5 mm, providing detection limits of 32 mg L−1 for folpet and 48 mg L−1 for cymoxanil. The manufacturing of folpet and cymoxanil was employed as an example and the IR methodology was validated for the implementation of contamination prevention programs in the pesticide industry. The swab test and rinsate method were…
Ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry to identify contaminants in water: an insight on environment…
2013
Ultra-high pressure liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-QqTOF-MS) acquiring full scan MS data for quantification, and automatic data dependent information product ion spectra (IDA-MS/MS) without any predefinition of the ions by the user was checked for identifying organic contaminants in water samples. The use of a database with more than 2000 compounds achieved high confidence results for a wide number of contaminants based upon retention time, accurate mass, isotopic pattern and MS/MS library searching. More than 20 contaminants, mostly pharmaceuticals, but also mycotoxins and polyphenols were unambiguously identified. Furthermore, the combination of s…
Direct derivative spectrophotometric determination of carbaryl and carbofuran in water samples
1990
Abstract Derivative absorption spectrophotometry has been applied to the direct determination of carbaryl and carbofuran in water samples. The use of the third derivative for carbaryl and the fourth derivative for carbofuran reduces the matrix effect and the seventh derivative provides, in both cases, accurate results for the determination of these pesticides, even working at low dilution levels of the samples. A limit of detection of 4 ppb and a variation coefficient of 0.1% have been obtained for the determination of carbaryl. Carbofuran can be determined with a limit of detection of 5 ppb and a variation coefficient of 0.02%.
HPLC determination of oxadiazon in commercial pesticide formulations
2008
A simple, fast and precise high performance liquid chromatographic (HPLC) procedure has been developed for the determination of oxadiazon in emulsifiable concentrated pesticide formulations. 20 µL of diluted sample in acetonitrile were injected in a Kromasil C18 (250 ×am injetados em uma coluna Kromasil C18 4.6 mm, 5 µm) column, using acetonitrile:water (80:20) as mobile phase at 1 mL min-1 flow rate and oxadiazon determined by absorbance measurement at 292 nm. A theoretical limit of detection of 0.02 µg mL-1, a limit of quantification of 0.047 µg mL-1, corresponding to a 0.02 and 0.07% m/v in the original sample, and a relative standard deviation of 0.08% for three replicate analysis of sa…
Matrix solid-phase dispersion extraction procedure for multiresidue pesticide analysis in oranges.
1996
A multiresidue extraction method based on matrix solid-phase dispersion (MSPD) is optimized for the extraction and gas chromatographic screening of eighteen insecticides (aldrin, carbophenothion, captafol, chlorpyriphos, chlorfenvinphos, diazinon, dicofol, alpha-endosulfan, beta-endosulfan, ethion, fenitrothion, folpet, methidathion, malathion, methyl-azinphos, methyl-parathion, phosmet, and tetradifon) from oranges. After optimization of different parameters, such as type of solid phase used and the amount of solid phase or eluent, recoveries ranged from 67 to 102% with relative standard deviations ranging from 2 to 10%. The limits of detection, calculated as 3 times the baseline noise ran…
Pressurised liquid extraction and capillary electrophoresis–mass spectrometry for the analysis of pesticide residues in fruits from Valencian markets…
2010
Abstract A procedure based in capillary electrophoresis–mass spectrometry (CE–MS) for the analysis of seven pesticides (flutolanil, simazine, haloxyfop, acifluorfen, dinoseb, picloram, and ioxynil) in four Mediterranean summer fruits with high water content (peaches, melon, watermelon, and apricot) is developed. Several conditions were studied for the optimisation of both, the separation and the electrospray (ESI) connection. The best results were obtained using 35 mM ammonium formiate (pH 9.7) as separation buffer, 20 °C as capillary temperature and 23 kV as applied voltage in an uncoated fused-silica capillary with 50 cm total length, 25 cm thermostated length, 25 cm at room temperature l…
Chemiluminometric determination of the pesticide 3-indolyl acetic acid by a flow injection analysis assembly
2005
Abstract A new method is proposed for the chemiluminescent determination of the pesticide 3-indolyl acetic acid by means of an flow injection analysis system. The chemiluminescence emission is obtained by oxidation of the analyte with Ce (IV) in nitric acid and presence of β-cyclodextrine. The continuous-flow method allows the determination of 159 samples h−1 of 3-indolyl acetic acid in an interval of concentrations over the range 0.5–15.0 mg l−1. The limit of detection was 0.1 μg l−1 and the R.S.D. (n, 17) at 2.0 mg l−1 of the pesticide level was 2.7%. The method was applied to water samples.
Photo-induced chemiluminescence determination of the pesticide Buminafos by a Multicommutation flow-analysis assembly
2008
Abstract The preliminary experiments in this paper deal with the photo-induced chemiluminescent behaviour of Buminafos family, after the experimental screening tests and several of them resulted positive, the herbicide Buminafos was selected to develop a new analytical method. The determination of Buminafos was performed with the aid of a Multicommutation (a solenoid valve set) assembly. The method involves the on-line photo-degradation of the analyte (stopped flow, 5 s) with the selected suitable medium (0.05% hydrogen peroxide) and its subsequent chemiluminescent oxidation by the potassium permanganate. Sample solution alternated segments with the photo-degradation medium; and, after the …
Selective solid-phase extraction of organophosphorus pesticides and their oxon-derivatives from water samples using molecularly imprinted polymer fol…
2020
Abstract A molecularly imprinted polymer was synthesized and characterized to be used as solid-phase extraction sorbent for simultaneous chlorpyrifos and diazinon and their oxon derivatives. Several imprinted polymers were prepared and evaluated in a retention study of these analytes compared with a non-printed polymer. Several parameters affecting the extraction of imprinted polymer such as washing solvent, composition and volume of the eluting solvent and sample volume, were also investigated. Under the optimum conditions, the developed method provided satisfactory limits of detection ranging between 0.07 µg L−1 to 0.12 µg L−1 and the material showed an excellent reusability (> 50 reuses)…
Evaluation of solid-phase extraction and stir-bar sorptive extraction for the determination of fungicide residues at low-microg kg(-1) levels in grap…
2004
Abstract A liquid chromatography–mass spectrometry method has been developed for determining bitertanol, carboxin, flutriafol, pyrimethanil, tebuconazole and triadimefon. The evaluation of both atmospheric pressure interfaces (API), atmospheric pressure chemical ionization (APCI) and electrospray (ESI) using positive and negative ionization modes, clearly shows that the studied pesticides are more sensitive using APCI in positive mode. Two procedures based on solid-phase extraction (SPE) and stir-bar sorptive extraction (SBSE) have been assessed for extracting these compounds in grape. The recoveries obtained by SPE in samples spiked at the limit of quantification (LOQ) level ranged from 60…