Search results for "Photocatalysis."
showing 10 items of 584 documents
High-speed solid state fluorination of Nb2O5 yields NbO2F and Nb3O7F with photocatalytic activity for oxygen evolution from water
2021
Solid state reactions are slow because the diffusion of atoms or ions through the reactant, intermediate and crystalline product phases is the rate-limiting step. This requires days or even weeks of high temperature treatment, and consumption of large amounts of energy. We employed spark-plasma sintering, an engineering technique that is used for high-speed consolidation of powders with a pulsed electric current passing through the sample to carry out the fluorination of niobium oxide in minute intervals. The approach saves time and large amounts of waste energy. Moreover, it allows the preparation of fluorinated niobium oxides on a gram scale using poly(tetrafluoroethylene) (®Teflon) scrap…
Photocatalytic Activity of TiO2 Coatings Obtained at Room Temperature on a Polymethyl Methacrylate Substrate
2022
Titanium dioxide (TiO2) coatings have a wide range of applications. Anatase exhibits hydrophilic, antimicrobial, and photocatalytic properties for the degradation of organic pollutants or water splitting. The main challenge is to obtain durable anatase nanoparticle coatings on plastic substrates by using straightforward approaches. In the present study, we revealed the preparation of a transparent TiO2 coating on polymethylmethacrylate (PMMA), widely used for organic optical fibres as well as other polymer substrates such as polypropylene (PP), polystyrene (PS), and polycarbonate (PC). The films were spin-coated at room temperature without annealing; therefore, our approach can be used for …
Enhanced (photo)catalytic activity of Wells-Dawson (H6P2W18O62) in comparison to Keggin (H3PW12O40) heteropolyacids for 2-propanol dehydration in gas…
2016
Abstract Catalytic and photocatalytic 2-propanol dehydration to propene at atmospheric pressure and a temperature range of 60–120 °C were carried out in gas-solid regime by using bare and supported Keggin H 3 PW 12 O 40 (PW 12 ) and Wells-Dawson H 6 P 2 W 18 O 62 (P 2 W 18 ) heteropolyacids (HPAs). Binary materials were prepared by impregnation of the HPAs on commercial SiO 2 and TiO 2 . The Wells-Dawson was in any case more active than the Keggin heteropolyacid and the differences were enhanced when the supported samples were used. In particular, Wells-Dawson HPA supported on TiO 2 and under irradiation showed the highest activity. The HPA species played the key role both in the catalytic …
Influence of Adsorbed Water on the Activation Energy of Model Photocatalytic Reactions
2017
Two commercial (Merck and Sigma-Aldrich) and two home prepared (HP05 and HP05C) powdered TiO2 photocatalysts were investigated by fast field cycling nuclear magnetic resonance experiments in order to explore the nature of the interactions between water and the solid surfaces. The results were related to the activation energies determined at temperatures ranging from 303 to 353 K for the photocatalytic oxidation in water of three model molecules presenting different interactions with the solid surface (catechol, phenol, and metylbenzoate). The photoactivity results at different temperatures were comparable to each other because the runs were carried out while keeping constant the concentrati…
Green synthesis of bromine by TiO2 heterogeneous photocatalysis and/or ozone: A kinetic study
2018
Abstract Elemental bromine is an industrially relevant compound traditionally produced from bromide ions by using chlorine as the oxidizing agent. Problems related to transportation and handling of the corrosive, expensive and toxic chlorine make green synthetic alternatives highly desirable. In this paper the green synthesis of bromine from bromide in aqueous solutions under mild conditions by means of TiO2 photocatalysis and/or ozonation has been investigated from a kinetic point of view. The ozonation in the absence of the photocatalyst follows a first order kinetic with respect to both ozone and bromide. The kinetics of the reactions in the presence of the photocatalyst has been describ…
Inverse opal TiO2 photocatalytsts for environmental applications
2017
This work aims to study the influence that different doping agents can have on the chemico-physical properties of TiO2 synthesized with the task to obtain an ordered porous material with an inverse opal structure and to evaluate the photocatalytic performance of these systems in the degradation of a model dye molecule (Rhodamine B, RhB) in water under Visible light irradiation.
La1-xSrxCo1-yFeyO3-delta perovskites: Preparation, characterization and solar photocatalytic activity
2015
Abstract LaCoO3 perovskites substituted by Sr at the A site and/or by Fe at the B site have been prepared by the citrate method. Characterizations by several techniques, such as specific surface area (BET method), XRD, TPR, SEM, UV–vis in DRS mode, XPS and TGA analyses, have been performed. The so prepared La1−xSrxCo1−yFeyO3−δ perovskites are semiconductor materials showing band gap energy values from 1.9 to 3.2 eV. They displayed solar photocatalytic activity for the 2-propanol degradation in gas–solid regime. The photocatalytic results suggest that the perovskites containing Fe are less active and the activity decreases by increasing the Fe content, however the presence of iron avoids the…
Photocatalytic Degradation of 4-Nitrophenol in Aqueous Suspension by Using Polycrystalline TiO2 Impregnated with Lanthanide Double-Decker Phthalocyan…
2007
The photocatalytic activity of polycrystalline TiO2 samples impregnated with rare-earth-metal diphthalocyanines was investigated. The 4-nitrophenol (4-NP) photocatalytic degradation in aqueous suspension was used as a probe reaction. Commercial anatase TiO2 was impregnated with home-prepared double-decker phthalocyanine complexes of the lanthanide metals, such as Ce, Pr, Nd, Sm, Ho, and Gd. In particular, the impregnation with Ho, Sm, and Nd complexes, acting as sensitizers, proved beneficial for the photoactivity of the studied systems. Significant improvements of the TiO2-based catalytic system appeared possible in terms of lower impregnation loading, enhanced photoreactivity under solar …
Comparison of the photocatalytic degradation of 2-propanol in gas–solid and liquid–solid systems by using TiO2–LnPc2 hybrid powders
2009
Photocatalytic degradation of 2-propanol was carried out as a probe reaction both in gas–solid and in liquid–solid systems in the presence of TiO2 both bare and impregnated with lanthanide (Sm, Gd, Ho) bis-phthalocyanines (LnPc2) used as sensitizers. Continuous and batch photo-reactors, irradiated with an equal flux of photons, were used in gas–solid and in liquid–solid systems, respectively. Propanone and acetaldehyde were the main intermediates found in both systems during 2-propanol oxidation, whereas carbon dioxide and water were the final oxidation products exclusively in the gas–solid regime. The photocatalysts exhibited significantly higher activity in the liquid–solid system than in…
Photocatalytic activity of nano and microcrystalline TiO2 hybrid systems involving phthalocyanine or porphyrin sensitizers
2011
Hybrid photocatalysts based on TiO(2)-anatase matrix, representing the both micro- and nano-structures, impregnated with selected lanthanide diphthalocyanine and metalloporphyrin sensitizers, were compared to evaluate their activity and effectiveness in a water suspension catalytic system designed to degrade 4-nitrophenol (4-NP) in a UV-stimulated reaction. Either type of the anatase catalyst was proved to be effective in mineralizing of 4-NP. However, kinetic studies confirmed that the composite's efficiency basically depends on the nature of the macromolecular sensitizer and to a minor extent on the dimensions (micro/nano) of the TiO(2) particles. The apparent higher activity observed for…