Search results for "Photocatalysis."
showing 10 items of 584 documents
Preparation and characterisation of TiO2 (anatase) supported on TiO2 (rutile) catalysts employed for 4-nitrophenol photodegradation in aqueous medium…
1999
Abstract In this paper the preparation of two sets of polycrystalline photocatalysts prepared by supporting TiO2 (anatase) on TiO2 (rutile) or Al2O3 is reported. The powders were prepared by a wet impregnation method using titanium(IV) isopropylate. The impregnation was followed by thermal treatment and this procedure was repeated several times in order to obtain samples with progressively increasing amounts of TiO2 (anatase). The photocatalytic activity of all of the specimens was tested by carrying out the 4-nitrophenol photodegradation, used as a “probe” reaction, in aqueous medium and in different kinds of batch photoreactors. The solids were characterised by X-ray diffraction (XRD), sp…
Mesocrystalline Cr and Sb-codoped anatase visible-light-driven photocatalyst
2018
Abstract We report on the synthesis, characterization and visible-light-driven photocatalytic activity of mesocrystalline Cr- and Sb-codoped anatase nanoparticles. Discrete and morphologically well-defined assemblies of anatase nanoparticles sized below 100 nm × 50 nm were prepared by hydrothermal aging of aqueous solutions containing titanium alkoxide, chromium acetylacetonate, antimony acetate and triethanolamine (TEOA) as stabilizer. The as-prepared and TEOA-free doped nanoparticles showed similar crystallographic parameters and spectroscopic features. The incorporation of Cr and Sb dopant cations into the anatase nanoparticles was evaluated by Rietveld refinement of X-ray diffraction pa…
Combined Adsorption/Photocatalytic dye removal by copper-titania-fly ash composite
2020
Abstract Achieving both photocatalytic efficiency and adsorption capacity is essential to produce a highly efficient photocatalyst. This study fabricated a new photocatalyst by combining copper (Cu) doped titanium dioxide (TiO2) with fly ash (FA). The photocatalysts were synthesized using mild acid (acid-FA/Cu/TiO2), base (base-FA/Cu/TiO2), and deionized water (rFA/Cu/TiO2) activated FA. EDX confirmed the inclusion of Cu in both Cu/TiO2 and FA/Cu/TiO2 composites. XRD analysis indicated the presence of the anatase form of TiO2 after Cu doping and incorporation into modified FA. All three FA/Cu/TiO2 composites demonstrated high absorption (UV and visible region) compared to their TiO2 and Cu/…
Effect of titanium dioxide crystalline structure on the photocatalytic production of hydrogen
2011
The effect of the crystalline phase of TiO 2 (anatase, rutile and brookite) on its photocatalytic activity in hydrogen production from methanol-water vapours has been investigated by testing a series of both home-made and commercial TiO 2 photocatalysts, either bare or surface-modified by deposition of a fixed amount, i.e. 1 wt%, of platinum as co-catalyst. For all of the TiO 2 samples the rate of hydrogen production increased by one order of magnitude upon Pt deposition, because of the ability of Pt to enhance the separation of photoproduced electron-hole pairs. Under irradiation in the 350-450 nm wavelength range, brookite and anatase showed similar photoactivities, both superior to that …
The effect of the surface disordered layer on the photoreactivity of titania nanoparticles
2017
It is well known that the surface of metal oxide catalysts presents, usually, non-crystalline species containing impurities and low coordinated cations, which are observed in HRTEM images as a disordered layer of amorphous phase. Despite of being these species more accessible and less stable than the crystalline catalysts components, they have been rarely considered when analysing the catalyst activity. In this work, we have studied the effect of a treatment with HCl solution at pH = 0 on the characteristics of the disordered layer in two commercial anatase TiO2 samples, using techniques such as TGA, 1H MAS-NMR and HRTEM, and by determining these sample photocatalytic activity for the 4-nit…
Preparation characterization and photocatalytic activity of polycrystalline ZnO/TiO2 systems. 2. Surface, bulk characterization, and 4-nitrophenol ph…
2001
Electron spin resonance spectroscopy (ESR), Fourier transform infrared spectroscopy (FTIR), and monitoring of pyridine (py) and boric acid trimethyl ester (BATE) adsorption for determining surface acidity and basicity, respectively, were used to carry out further characterization of mixed ZnO/TiO2 polycrystalline solids prepared by different methods. Moreover, the powders were tested in a batch photoreactor for a probe reaction, i.e., 4-nitrophenol photodegradation in aqueous medium. ESR results indicated the presence of signals attributable to Zn+ species in ZnO/TiO2 (anatase) solids, while in ZnO/TiO2 (rutile) samples the presence of zinc induced only the formation of signals probably due…
Step-by-Step Growth of HKUST-1 on Functionalized TiO2 Surface: An Efficient Material for CO2 Capture and Solar Photoreduction
2018
The present study reports on a simple preparation strategy of a hybrid catalyst, TiO2/HKUST-1, containing TiO2 anatase nanoparticles (NPs) with tailored morphology and photocatalytic activity coupled with a porous metal-organic framework (MOF), namely HKUST-1, as an advanced material for the CO2 photocatalytic reduction. In detail, TiO2/HKUST-1 catalyst was prepared via an easy slow-diffusion method combined with a step-by-step self-assembly at room temperature. The growth of crystalline HKUST-1 onto titania surface was achieved by functionalizing TiO2 nanocrystals, with phosphoesanoic acid (PHA), namely TiO2-PHA, which provides an intimate contact between MOF and TiO2. The presence of a cr…
Preparation characterization and photocatalytic activity of polycrystalline ZnO/TiO2 systems. 1. Surface and bulk characterization
2001
Polycrystalline ZnO/TiO2 solids have been prepared with four different methods using home prepared TiO2 (anatase) or TiO2 (rutile) as supports and Zn(NO3)2·6H2O or Zn(CH3COO)2·2H2O as precursors for ZnO. The bulk and surface properties of the samples were investigated by means of TG-DTA, XRD, TEM, SEM-EDAX, XPS, BET surface area determination, and porosity measurements. XRD and TEM results indicate that no significant defect structures exist in any of the samples. The ZnO crystallinity and its enrichment on the surface of TiO2 particles were dependent on the preparation method. The surface areas generally decrease by increasing the amount of ZnO except when ZnO from Zn(CH3COO)2·2H2O was sup…
Mesocrystalline anatase nanoparticles synthesized using a simple hydrothermal approach with enhanced light harvesting for gas-phase reaction
2018
Mesocrystalline TiO2 nanoparticles were synthesized using a hydrothermal approach. A simple two-step procedure at low temperature (<140 °C) allowed the nucleation of primary particles sized 2–4 nm and their subsequent assembly as almost spherical aggregates sized ≈20 nm. X-ray powder diffraction (XRD), Raman and X-ray photoelectron spectroscopy (XPS) studies, and HRTEM studies confirmed anatase as the unique TiO2 crystalline phase. The mesocrystalline structure of the anatase aggregates was clearly evidenced by HRTEM and SAED results. The mesocrystalline nanopowders exhibit a mesoporous structure with a surface area and pore volume of 63.5 m2 g−1 and 0.22 cm3 g−1, respectively. Ultraviolet …
Reduced grey brookite for noble metal free photocatalytic H2evolution
2021
Herein we introduce for the first time a reduced “grey” brookite TiO2 photocatalyst, produced by thermal hydrogenation of brookite nanoparticles, that shows a remarkable noble metal free photocatalytic H2 evolution. Its activity is substantially higher than that of other TiO2 polymorphs, i.e. anatase or rutile, comparably sized and activated by hydrogenation under optimized conditions. Along with brookite powders, an oriented brookite single crystal was investigated as a defined surface to confirm the effects of the hydrogenation treatment. By a combination of electron paramagnetic resonance (EPR), electron and X-ray characterization techniques applied to the powders and single crystal, we …