Search results for "Photodegradation"
showing 10 items of 153 documents
Facile synthesis of magnetically separable CoFe2O4/Ag2O/Ag2CO3 nanoheterostructures with high photocatalytic performance under visible light and enha…
2017
Riga Technical University supported the preparation of this manuscript from the Scientific Research Project Competition for Young Researchers No. ZP-2016/7. The authors wish to kindly acknowledge the financial support of HZB, Estonian Research Council (PUT1096, PUT735 and IUT2-25) and Estonian Centre of Excellence in Research Project “Advanced materials and high-technology devices for sustain-able energetics, sensorics and nanoelectronics” TK141 (2014–2020.4.01.15-0011).
N-TiO2 Photocatalysts highly active under visible irradiation for NOX abatement and 2-propanol oxidation
2013
N-doped TiO2 powders were prepared by two different sol-gel methods. Samples were characterised by X-ray diffraction (XRD), BET specific surface area measurements (SSA), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Electron Paramagnetic Resonance (EPR). XPS measurements revealed a signal at 400 eV assignable to nitrogen in the form of Ti-N-O. EPR signals are attributed to molecular NO trapped with cavities/defects possibly interacting with oxygen vacancies. The photocatalytic activity under UV and visible light was determined following the abatement of NOx and the photodegradation of 2-propanol in gas-solid systems. N…
Au–NiOx nanocomposite for hot electron-assisted plasmonic photocatalysis
2020
Nanocomposites of metal–oxide semiconductors containing Au nanoparticles are emerging multifunctional materials for sunlight-driven highly efficient photocatalysis. Here we report a solution-processed nanocomposite synthesis of Au–NiOx nanocomposite films by slot-die coating and plotter printing in a straightforward in situ synthesis approach. Our study demonstrated a significantly enhanced photocatalytic decomposition reaction of MO upon exposure of Au–NiOx films to a sunlight simulator. The excellent photocatalytic activity is ascribed to the generation of hot carriers after LSPR excitation in Au NPs. Suitable band alignment between the valence band of NiOx and the Fermi level of Au NPs l…
One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications
2020
Abstract A versatile catalyst based on halloysite and zinc oxide (HNT@ZnO) was prepared, for the first time, starting from ZnO commercial bulk form as Zn precursor source, in a one-pot procedure. This strategy gives the possibility to obtain small ZnO nanoparticles loaded on the HNT surface without the use of inorganic salts which envisage the removal of undesired anions and therefore a calcination process at high temperature. It was found that the presence of halloysite improved the UV–vis spectral absorption ability of ZnO. The hybrid was successful used as photocatalyst for the methylorange and rhodamine B degradation. In addition, after eight consecutive cycles for the methylorange phot…
One-step synthesis and deposition of ZnFe2O4 related composite films via SPPS route for photodegradation application
2019
Binary spinel-type metal oxides (AB2O4) related materials, including ferrites (AFe2O4), are attractive photocatalysts thanks to their excellent visible light response for the photodegradation of organic pollutants. Currently, these materials are synthesized via conventional chemical routes suffering from long preparation duration and multistep. Moreover, the photocatalysts are obtained as nano-powders from conventional chemical routes would introduce another drawback for their recycling and reuse. From an industrial perspective, it is desirable to develop an efficient and facile synthesis process to produce photocatalysts in a non-dispersible form. Herein, we demonstrate that the solution p…
Tunable morphologies of ZnO films via the solution precursor plasma spray process for improved photocatalytic degradation performance
2018
Abstract The Solution Precursor Plasma Spray (SPPS) process is a novel, versatile and one-step route for building photocatalytic films. Herein, the influence of the precursor solution composition on the microstructure and on the properties of ZnO films prepared via the SPPS process was studied. Nanostructured ZnO particles (i.e. nanorods (NRs) and nanowires (NWs)) were obtained by using a solution of pure Zn(OAc)2 rather than pure Zn(NO3)2. Upon adding urea to the Zn(NO3)2 solution, NRs structured ZnO films were formed as well. The addition of acetic acid into the Zn(OAc)2 solution led to a damage of the nanostructured morphologies likely due to the inhibition of the zinc-containing cluster…
Pickering Emulsions of Fluorinated TiO2: A New Route for Intensification of Photocatalytic Degradation of Nitrobenzene
2020
International audience; Fluorination of the TiO2 surface has been often reported as a tool to increase the photocatalytic efficiency due to the beneficial effects in terms of production of oxidizing radicals. Moreover, it is shown that the unique amphiphilic properties of the fluorinated TiO2 (TiO2-F) surface allow one to use this material as a stabilizer for the formulation of Pickering emulsions of poorly soluble pollutants such as nitrobenzene (NB) in water. The emulsions have been characterized in terms of size of the droplets, type of emulsion, possibility of phase inversion, contact angle measurements, and optical microscopy. The emulsified system presents micrometer-sized droplets of…
Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation
2017
[EN] The extent of the ultraviolet¿visible (UV¿vis) photoirradiation effect on high-density polyethylene (HDPE) and HDPE¿sili-con (Si) composites is reported in terms of the addition of Si microparticles at contents of 0.1, 1, and 5 wt %. A standard acceleratedUV-vis exposure was applied over 2750 h, corresponding to 22 months in Florida. Thermogravimetry, differential scanning calorimetry,and Fourier transform infrared spectroscopy were used as reliable techniques for monitoring the quality of the HDPE-Si composites. Theincreasing addition of Si microparticles delayed the photodegradation of the HDPE¿Si composites. Because of their strong light-scattering effects, Si microparticles blocked…
Influence of laminated architectures of heterostructured CeO2-ZnO and Fe2O3-ZnO films on photodegradation performances
2020
Abstract The development of photocatalytically active films has gained a great attention in recent years. Herein, new heterostructured films associating ZnO and CeO2 or Fe2O3 and exhibiting various architectures were prepared by the solution precursor thermal spray (SPPS) process. The paper examines the effect of the films laminated architectures on the photodegradation performance. For CeO2-ZnO and Fe2O3-ZnO films, the photodegradation efficiency of the Orange II dye is 100% and 95% after 240 min UV light irradiation and after 360 min visible light irradiation, respectively. The photocatalytic activity of the laminated structures was found to depend on the materials used to construct the h…
Influence of oxidation level of graphene oxide on the mechanical performance and photo-oxidation resistance of a polyamide 6
2019
The aim of this work is to study the relationship between the chemical-physical properties of graphene oxide (GO) and the performance of a polyamide 6 (PA6) in terms of mechanical reinforcement and resistance to UV-exposure. For this purpose, two samples of GO possessing different oxidation degrees were added (0.75 wt.%) to PA6 by way of a two-step technique and the materials achieved were carefully analysed from a morphological, chemical-physical, mechanical point of view. Photo-oxidation tests were carried out to assess the performance of this class of nanohybrids after 240 h of UV-exposure. The results reveal that both nanocomposites exhibit enhanced mechanical performance and durability…