Search results for "Photoluminescence"
showing 10 items of 811 documents
Two-Dimensional Indium Selenide for Sulphur Vapour Sensing Applications
2020
Surface-to-volume ratio in two-dimensional (2D) materials highlights among their characteristics as an inherent and intrinsic advantage taking into account their strong sensitivity to surface effects. For this reason, we have proposed in this work micromechanically exfoliated 2D nanosheets of InSe as an optical vapour sensor. As a proof of concept, we used 2-mercaptoethanol as the chemical analyte in vapour phase to monitor the change of the InSe photoluminescence (PL) before and after exposure to the analyte. For short vapour exposure times (at low analyte concentration), we found a PL enhancement of InSe nanosheets attributed to the surface localization of Se defects. For long vapour expo…
Effect of the addition of different doping agents on visible light activity of porous TiO2 photocatalysts
2018
Abstract The influence of the addition of different doping agents (N, W and Hf) on the macroporous TiO2 photoactivity toward the Rhodamine B degradation and ethanol photo-oxidation was evaluated. The samples were characterized by XRD, XPS, SEM, TEM, N2 adsorption-desorption, UV–vis Diffuse Reflectance and Photoluminescence spectroscopies to study also the changes in the physico-chemical properties due to the presence of dopants. The photonic effect and the high ordered porous structure of the macroporous TiO2 that lead to increase the path length of the light, were the key factors that allow to enhance the catalytic activity towards the dye and VOC degradation under visible and solar light …
Core-shell Zn-doped TiO2-ZnO nanofibers fabricated via a combination of electrospinning and metal-organic chemical vapour deposition
2010
Zn-doped TiO2 nanofibers shelled with ZnO hierarchical nanoarchitectures have been fabricated combining electrospinning of TiO2 (anatase) nanofibers and metal-organic chemical vapor deposition (MOCVD) of ZnO. The proposed hybrid approach has proven suitable for tailoring both the morphology of the ZnO external shell as well as the crystal structure of the Zn-doped TiO2 core. It has been found that the Zn dopant is incorporated in calcined electrospun nanofibers without any evidence of ZnO aggregates. Effects of different Zn doping levels of Zn-doped TiO2 fibers have been scrutinized and morphological, structural, physico-chemical and optical properties evaluated before and after the hierarc…
Tailoring the Structural, Optical, and Photoluminescence Properties of Porous Silicon/TiO2 Nanostructures
2015
The structural, optical, and photoluminescence properties of porous silicon (PSi)/titanium dioxide (TiO2) nanostructures were investigated. PSi structures consisting of macro- and mesoporous layers were fabricated by metal-assisted chemical etching, and then TiO2 was introduced inside the PSi matrix using the atomic layer deposition technique. We performed scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction, energy dispersive X-ray spectroscopy, Raman spectroscopy, ellipsometry, and photoluminescence (PL) spectroscopy to characterize the prepared and annealed PSi/TiO2 nanostructures. TEM and Raman analyses revealed that TiO2 had a crystalline anatase stru…
Photoluminescence: A very sensitive tool to detect the presence of anatase in rutile phase electrospun TiO 2 nanofibers
2015
Abstract This paper reports on the synthesis and the characterization of titanium dioxide (TiO2) nanofibers prepared by electrospinning. The samples were annealed at various temperatures in air for 4 h. The as-spun and annealed TiO2/PVP composite nanofibers were characterized by scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy analysis (EDX), X-ray diffraction (XRD), Raman spectroscopy and photoluminescence (PL). The results show that the heat treatment has an effect on the crystallization process. Even if the XRD data shows a complete anatase-to-rutile transition in the TiO2 nanofibers at 900 °C, photoluminescence reveals a small portion of anatase in rutile sample.…
Study of phase composition, photocatalytic activity, and photoluminescence of TiO2 with Eu additive produced by the extraction-pyrolytic method
2021
The Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2. The work was also partially supported by the LZP grant 2020/2-0074. R. Burve has been supported by the project “Synthesis of nanostructured materials based on titanium dioxide and tin dioxide and investigation of their physicochemical properties” Nr. MP-2019/7, for strengthening scientific personnel capacity 2019/2020 at the Riga Technical University. Authors are grateful to Dr. K. Šmits for the microscopic measurements and SEM images.
Photoluminescence Study of ZnSe Single Crystals Obtained by Solid Phase Recrystallization under Different Pressure Conditions. Effects of Thermal Tre…
2002
ZnSe single crystals, obtained by the Solid Phase Recrystallization (SPR) method under three different pressure conditions, 10 and 5 atm of Se, and 2 atm of argon, have been investigated by means of photoluminescence (PL) and optical microscopy. Special attention has been paid to the surface state of the samples. Samples recrystallized under 10 atm of Se present the best rate between the PL response for the excitonic zone and the deep level one that shows a clean PL emission without significant peaks and/or bands. The presence of slip bands has been detected and analysed by means of optical microscopy and photoluminescence. In order to study the changes introduced by post growth thermal tre…
Competitive relaxation processes of oxygen deficient centers in silica
2003
Physical review / B 67, 033202 (2003). doi:10.1103/PhysRevB.67.033202
Phonon coupling of non-bridging oxygen hole center with the silica environment: Temperature dependence of the 1.9 eV emission spectra
2008
Abstract We report an experimental study on the shape of the 1.9 eV emission associated with non-bridging oxygen hole centers in silica and its temperature dependence, from 4 up to 300 K, under visible and ultraviolet excitation. Our analysis points out that these defects are coupled with their environment by phonons whose contribution can be described by the single mode of mean frequency between 300–400 cm −1 and Huang–Rhys factor of ∼3. On increasing the temperature, the luminescence intensity undergoes a thermal quenching caused by non-radiative processes, its deviation from a pure Arrhenius law can be accounted for by an uniform distribution of activation energy, from 0.002 to 0.05 eV. …
The effects of Pr3+ doping on the dielectric and photoluminescence properties of BaTi0.9(Yb0.5Nb0.5)0.1O3 ceramic
2019
Abstract The praseodymium Pr3+ doped BaTi0.9(Yb0.5Nb0.5)0.1O3 (BTYN01) ceramic, under low concentration (0.1%), was prepared by a conventional ceramic fabrication technique and its phase structure, microstructure, dielectric, vibrational and photoluminescence (PL) properties was studied. Both X-ray diffraction (XRD) and Raman studies confirmed the incorporation of Pr3+ into A-site lattice of BTYN01. The structure of Ba0.9985Pr0.001□0.0005Ti0.9(Yb0.5Nb0.5)0.1O3 (BTYN01-Pr) shows the coexistence of Pm 3 ¯ m -cubic symmetry (∼10%) and P4mm-tetragonal symmetry (∼90%) at room temperature. The dielectric study reveals that the maximum of the dielectric constant of BTYN01-Pr occurred at 283 K. The…