Search results for "Photonics"
showing 10 items of 802 documents
Effect and optimization of burst assembly algorithms for video traffic transmissions over OBS networks
2008
Optical burst switching (OBS) has been proposed to be a technology for implementing the next generation optical Internet. In this architecture, burst assembly algorithms have an important influence in the traffic pattern that characterizes this sort of optical networks. On the other hand, traffic coming from new applications (such as video on demand, Voice over IP, online gaming or Grid services) that have real time and bandwidth constraints has been experimented a rapid increment. Consequently, we consider important to evaluate the performance of the real time traffic over OBS networks. In this paper, we evaluate the video transmissions performance (MPEG4/RTP/UDP) over OBS networks, for bo…
In vitro optical performance of a new aberration-free intraocular lens
2014
To assess the optical performance of the new EnVista intraocular lens (IOL). Four aspheric IOLs were evaluated; the new EnVista is one amoung them. This IOL, similarly to the Z-Flex HB and the Bi-Flex 1.8 667AB ones, has a neutral aspheric design, whereas the fourth IOL under test (AcrySof IQ IOL SN60WF) presents a negative spherical aberration (SA). The IOL’s aberration patterns were measured in vitro, by setting them up on an optical bench. From these aberration-pattern data, the modulation transfer function (MTF), the average modulation values, and the points spread function (PSF) were calculated. Furthermore, in order to assess the potential optical quality that these IOLs would yield o…
Optical quality comparison between 2 collagen copolymer posterior chamber phakic intraocular lens designs
2014
Purpose To compare the optical quality in vitro of 2 designs of the Visian Implantable Collamer Lens phakic intraocular lens (pIOL) for different powers and optical apertures. Setting University of Valencia, Valencia, Spain. Design Experimental study. Methods The Nimo TR1504 deflectometry device was used to measure the V4c pIOL, which has a smaller optic diameter, and the V5 pIOL, which has a larger optic diameter. The pIOLs were measured for −3.00 diopters (D), −6.00 D, −9.50 D, and −10.50 D at different optical apertures from 3.00 to 6.00 mm depending on the IOL power and model. The root mean square of higher-order aberrations (RMS HOAs) was analyzed. The Strehl ratio, point-spread functi…
In vitro optical performance of nonrotational symmetric and refractive-diffractive aspheric multifocal intraocular lenses: impact of tilt and decentr…
2012
Purpose To evaluate the optical quality of Acrysof Restor SN6AD1 refractive–diffractive +3.00 D and Lentis Mplus LS-312 nonrotational symmetric +3.00 D aspheric multifocal intraocular lenses (IOLs) and analyze the effect of tilt and decentration. Setting University of Valencia, Valencia, and University of Murcia, Murcia, Spain. Design Experimental study. Methods An artificial model eye was used to measure wavefront aberrations of both IOL models. The modulation transfer function (MTF) and point-spread function (PSF) were calculated for a 5.0 mm pupil and under 5 situations: centered, 0.2 mm and 0.4 mm decentered, and 2 degrees and 4 degrees tilted. Results The refractive–diffractive IOL had…
Properties of silicon integrated photonic lenses: bandwidth, chromatic aberration, and polarization dependence
2013
We analyze the properties of silicon integrated photonic lenses based on scattering optical elements. The devices have been inverse- designed by combining genetic algorithms and the multiple scattering theory. These lenses are able to focus an infrared plane wave front on a position freely determined during the design stage. The nanofabricated silicon integrated lenses have proved effective over a large range of wave- lengths, measured to be of the order of 100 nm. The lenses show chromatic aberration, with a displacement of the position of the focus mea- sured to be higher than 1.5 μm when the wavelength varies from 1500 to 1600 nm. Moreover, we analyze the polarization of the focused beam…
Efficient excitation of dielectric-loaded surface plasmon-polariton waveguide modes at telecommunication wavelengths
2008
International audience; The excitation of surface plasmon-polariton (SPP) waveguide modes in subwavelength dielectric ridges deposited on a thin gold film has been characterized and optimized at telecommunication wavelengths. The experimental data on the electromagnetic mode structure obtained using scanning near-field optical microscopy have been directly compared to full vectorial three-dimensional finite element method simulations. Two excitation geometries have been investigated where SPPs are excited outside or inside the dielectric tapered region adjoint to the waveguide. The dependence of the efficiency of the SPP guided mode excitation on the taper opening angle has been measured an…
Spectral and temperature sensitivity of area de-coupled tandem modules
2015
- Area de-coupling is a recently suggested method for current- or voltage-matching two-terminal tandem modules. It has previously been shown that under standard conditions, area de-coupled modules have the same theoretical efficiency as four-terminal tandem cells for any combinations of band gaps. In this work, the spectral and temperature sensitivity of ideal area de-coupled modules is investigated by detailed balance modeling. Voltage-matched area de-coupled modules are found to be considerably less sensitive to changes in the spectrum than current-matched modules. Current-matched modules are, on the other hand, found to be less sensitive to changes in the temperature. Under normal condit…
Ytterbium-doped fiber laser as pulsed source of narrowband amplified spontaneous emission
2019
AbstractWe report random noise pulsed regime of an ytterbium-doped fiber laser arranged in common Fabry-Perot configuration. We show that the laser output obeys the photon statistics inherent to narrowband amplified spontaneous emission and that the noise pulsing is properly addressed in terms of probability density and autocorrelation functions. Our novel approach reveals, in particular, that the regime’s coherence time dramatically shortens, from few ns to tens ps, with increasing laser power.
Highly Efficient Holmium-Doped All-Fiber ∼2.07-μm Laser Pumped by Ytterbium-Doped Fiber Laser at ∼1.13 μm
2018
We report a 2.07-μm Holmium-doped all-fiber laser (HDFL) pumped by a 1.13-μm Ytterbium-doped fiber laser (YDFL). Home-made alumino–germano–silicate holmium-doped fiber (HDF) served here as an active medium, optimized in terms of chemical composition and co-dopants’ concentrations. Laser action at 2.07 μm was assessed in simple Fabry–Perot cavity, formed by a couple of home-made fiber Bragg gratings (FBGs), inscribed directly in the HDF; this allowed notable diminishing of intracavity loss of the 2.07-μm laser. HDF was in-core pumped by the 1.13-μm double-clad YDFL with a power of ∼12.5 W, in turn pumped in-clad by a laser diode (LD) operated at 0.97 μm with ∼24.5-W output. Using optimal len…
All polarization-maintaining passively modelocked ytterbium-doped fiber lasers, behavior under two different cavity configurations
2020
Fil: Cuadrado-Laborde, Christian. Universidad de Valencia. Departamento de Física Aplicada; España Fil: Cuadrado-Laborde, Christian. Consejo Nacional de Investigaciones Científicas. Instituto de Física Rosario; Argentina Fil: Cuadrado-Laborde, Christian. Pontificia Universidad Católica Argentina. Facultad de Química e Ingeniería del Rosario; Argentina Fil: Carrascosa, Antonio. Universidad de Valencia. Departamento de Física Aplicada; España Fil: Diez, Antonio. Universidad de Valencia. Departamento de Física Aplicada; España Fil: Cruz, J. L. Universidad de Valencia. Departamento de Física Aplicada; España Fil: Andrés, M. V. Universidad de Valencia. Departamento de Física Aplicada; España Abs…