Search results for "Photooxidation"
showing 10 items of 29 documents
Photooxidation and photostabilization of EVA and cross-linked EVA
2016
Abstract Cross-linked EVA copolymers are widely used as encapsulant material for photovoltaic modules in order to protect the solar cell from the dangerous and degrading environmental factors like moisture and UV radiations. The protection of these modules from photooxidation is the main important objective in their production. In this work, samples of cured EVA in presence of different types of stabilizers have been photooxidized to better understand the photooxidation behavior and the effects of these stabilizers on the mechanical properties. All the results obtained on the cross-linked samples have been compared with those obtained in the same conditions and with the same formulations wi…
Low-density polyethylene/polyamide/clay blend nanocomposites: Effect of morphology of clay on their photooxidation resistance
2017
The photooxidation behaviour of low-density polyethylene (LDPE)/polyamide (PA) blends, containing polyamide 11 (PA11) or polyamide 6 (PA6), has been investigated in the absence and presence of a small amount of commercial organomodified clay (OMMT). The polymer blends LDPE/PA11 and LDPE/PA6 at 75/25 wt./wt.%, with and without OMMT, have been prepared by a two-step procedure: extrusion and sheet formulation. The formulated complex systems have been subjected to accurate morphological analysis in order to evaluate the effect of the OMMT presence on the refinement of the blend morphology. Furthermore, the produced sheets have been subjected to arterial UVB exposure and the variations of the me…
In-line monitoring of the photooxidation behaviour of a PP/clay nanocomposite through creep measurements
2016
Abstract The photooxidation behaviour of a polypropylene/organomodified clay nanocomposite sample has been monitored by means of a new apparatus through the record of the creep curves measured while the sample is subjected to the contemporary action of temperature, tensile strength and UV radiation. The creep curves of the irradiated samples are higher than those of the non-irradiated samples and the curves diverge when the molecular weight begins to decrease because of the degradation. At the same the formation of carbonyl groups is observed. The creep curves of the non-irradiated and irradiated samples give, then, an immediate evaluation of the begin and of the development of the photooxi…
Photooxidative behaviour of polyethylene/polyamide-6 blends
2010
International audience; The photochemical behaviour of several polyethylene/polyamide-6 blends was studied under conditions of artificial accelerated weathering. Particular attention was paid to five different compositions ranging from pure polyethylene to pure polyamide with blends of PE/PA-6 of various compositions: 75/25, 50/50 and 25/75 wt/wt%. Analysis by infrared spectroscopy of the chemical modifications caused by photooxidation showed that exposing the polyethylene/polyamide-6 blends to UV-light irradiation led to the formation of oxidation photoproducts in both polymer phases. In agreement with both the mechanical and spectroscopic analyses, the photooxidation rate of the blends wa…
Effect of the orientation on the photooxidation behaviour of polymer films
2016
Abstract The effect of the orientation on the photooxidation of polymers is quite controversial. Both improvement of the photo-resistance along the oriented direction and worsening of the photooxidation kinetic have been reported. In this work the effect of the orientation has been investigated on films of PE, PP and PET with different degree of orientation and crystallinity. The results show that the photo-stability, measured from the decay of the elongation at break curve as a function of the irradiation time, improves in the more oriented direction, but this is more and more relevant with increasing the crystallinity degree. It has been hypothesized that the reinforcing action of the ori…
Photooxidations of Alkenes in Fluorinated Constrained Media: Fluoro-organically Modified NaY as Improved Reactors for Singlet Oxygen “Ene” Reactions
2007
Creating a stationary fluorinated environment inside the zeolite cavity can increase the reactivity observed for intrazeolite photooxidation of alkenes. Exchanging the zeolite with fluorinated organic cations is a much more effective strategy than simply using a fluorinated solvent for slurry irradiations. Use of cations containing C-F bonds is also more efficient than use of deuterated cations for creation of a singlet oxygen friendly environment where the quenching processes are slowed down. Doping the zeolite with fluoro-organic cation 4 resulted in an increase in the singlet oxygen lifetime to 12 micros.
Unexpectedly ambivalent O-2 role in the autocatalytic photooxidation of 2-methoxybenzyl alcohol in water
2015
An unusual autocatalytic photooxidation of 2-methoxybenzyl alcohol has been observed under UV irradiation in aqueous medium. The homogeneous oxidation is catalyzed by the corresponding aldehyde that is also the main oxidation product. The trend of alcohol disappearance rate matches the typical shape of an autocatalytic process, where a crucial and ambivalent role is played by the presence of molecular oxygen. Low oxygen concentrations give rise to a zero-order reaction since the beginning of irradiation, while higher amounts of oxygen reduce the alcohol oxidation rate until the aldehyde reaches a concentration high enough to speed up the alcohol's conversion. Experiments performed by varyin…
Kinetics of 4-Methoxybenzyl Alcohol Oxidation in Aqueous Solution in a Fixed Bed Photocatalytic Reactor
2010
WOS: 000280384800004
Photooxidation and Stabilization of Photooxidized Polyethylene and of its Monopolymer Blends
2003
The increasing use of products from recycled polymers, or from blends with recycled polymers exposed to the outdoors, implies the need for good weathering resistance. This is particularly important when the recycled material comes, in turn, from products exposed during their lifetime to the sun. In this case the presence of C=O groups in the macromolecular chains strongly increases the photooxidative degradation kinetics of these secondary materials. In this work the change of the photooxidative degradation of blends of virgin and photooxidized polyethylene was evaluated as a function of the C=O content present in the material. As expected, the presence of the C=O groups strongly increases …
IN-LINE MONITORING OF THE PHOTOOXIDATION BEHAVIOUR OF PP/CLAY NANOCOMPOSITES THROUGH CREEP MEASUREMENTS
2016
The photooxidation of polymer systems is usually investigated by monitoring the change of chemical and molecular structure, morphology and macroscopic after a given period of UV exposition. In a previous paper, La Mantia et al. [1] presented a new apparatus that is able to monitor during the accelerated weathering the effect of the photooxidation on a polymer sample subjected not only to temperature, humidity and UV irradiation, but also to a mechanical stress, fully simulating real working conditions for plastic products. In this work, a polypropylene/organomodified clay nanocomposite has been subjects to the same test and the results compared with those obtained for the pure matrix.