Search results for "Photovoltaic system"
showing 10 items of 376 documents
Technical Rules for Connecting PV Systems to the Distribution Grid: A Critical Comparison of the Italian and Vietnamese Frameworks
2018
In the last two decades, starting from the Kyoto protocol, decarbonization has promoted worldwide the rise of distributed generation from renewable energy sources. Currently, Vietnam is still showing a strong dependence on fossil fuels but with a great interest in investing in renewable, especially in photovoltaic (PV) systems. In this paper, the current Vietnamese technical and administrative framework for the connection of PV systems to the power grid is presented and critically compared to the Italian one, in order to define the bases for future cooperation in distributed generation and renewable sectors.
Optimization of photovoltaic solar power plant locations in northern Chile
2017
The optimization of photovoltaic solar power plants location in Atacama Desert, Chile, is presented in this study. The study considers three objectives: (1) Find sites with the highest solar energy potential, (2) determine sites with the least impact on the environment, and (3) locate the areas which produce small social impact. To solve this task, multi-criteria decision analyses (MCDAs) such as analytical hierarchy process and ordered weighted averaging were applied in a GIS environment. In addition, survey results of social impacts were analyzed and included into the decision-making process, including landscape values. The most suitable sites for solar energy projects were found near roa…
3-Phase grid-connected building integrated photovoltaic system with reactive power control capability
2020
Abstract Recently, a tendency in the growing of grid-connected building integrated photovoltaic (BIPV) systems has been noticed in most countries. Hence, high penetration of PV power into the system network can be observed in many points in the network. This may cause severe problems on the distribution network due to the intermittent nature of PV systems. As a feasible solution, the reactive power capability of voltage source inverter in PV systems can be employed rather than approaching expensive grid infrastructures in the distribution network. The purpose of this study is to implement a 3-phase grid-connected (BIPV) system with reactive power control to regulate the system voltage and i…
Synthesis and photovoltaic performance of dihydrodibenzoazepine-based sensitizers with additional lateral anchor
2013
Three novel metal-free organic dyes with dihydro-5H-dibenzo[b,f]azepine as a donor and cyanoacrylic acid as an anchoring unit were designed as an innovative linear skeleton of D-D-pi-A type of organic dyes. The conversion efficiency of the derived dye-sensitized solar cells is moderate. Among them, the dye with a hydroxy group as an additional anchoring moiety exhibited the highest UV-Vis absorption with a maximum molar extinction coefficient of 24,136 M-1 cm(-1) at lambda(max) = 458 nm and the best photovoltaic performance with an overall power conversion efficiency of 4.88%, while the dye with a carboxy group as an additional anchoring moiety exhibited the lowest conversion efficiency (4.…
Improved Performance of a PV Solar Panel with Adaptive Neuro Fuzzy Inference System ANFIS based MPPT
2018
This article presents the development of an intelligent technique of Adaptive-Neuro-Fuzzy Inference System (ANFIS) based on Maximum Power Point Tracking (ANFIS-MPPT) algorithm with PI controller in order to increase the performances of the photovoltaic panel system below change atmospheric circumstances. In this work, the mathematical principles of the ANFIS method were presented and developed using the software Matlab/Simulink. Moreover, the effectiveness of this ANFIS-MPPT technique is demonstrated by a comparison of the obtained results with others obtained from a classical (Perturb & Observe) P & O-MPPT method.From the analysis of the obtained results, the ANFIS-MPPT command provide bet…
A qualitative examination of performance and energy yield of photovoltaic modules in southern Norway
2010
Three different, commercially available photovoltaic modules have been monitored outdoors in the town of Grimstad, Norway. The present paper describes the experimental setup that was implemented, in particular details of the low-cost electronic loads. Results compare measured performance with manufacturer's data, and temperature measurements enable a comparison with performance at standard test condition temperature. Overall, the monocrystalline module performed best both regarding maximum efficiency and overall energy production, whereas the module based on triple junction amorphous silicon technology had the worst performance considering these criteria. The gross numbers of energy yield c…
A procedure to calculate the I–V characteristics of thin-film photovoltaic modules using an explicit rational form
2015
Abstract Accurate models of the electrical behaviour of photovoltaic modules are effective tools for system design. One or two diode equivalent circuits have been widely used even though some mathematical difficulties were found dealing with implicit equations. In this paper, a new model based on a simple rational function, which does not contain any implicit exponential form, is presented. The model was conceived in order to be used with thin-film photovoltaic modules, whose current–voltage curves are characterised by very smooth shapes. The parameters of the model are evaluated by means of the derivatives of the issued characteristics in the short circuit and open circuit points at standa…
A procedure to evaluate the seven parameters of the two-diode model for photovoltaic modules
2019
Abstract The paper presents an analytical procedure to calculate the seven parameters of the two-diode model of photovoltaic (PV) panels for any value of the solar irradiance and cell temperature. Six parameters (the photocurrent, the diode reverse saturation currents, the quality factor of the first diode and the series and shunt resistances), are evaluated by solving the equations related to the properties of the main points of the current-voltage (I-V) characteristics. The further information, necessary to calculate the entire set of seven truly independent parameters, is based on two conditions that have to be simultaneously satisfied: 1) the exclusion of negative values of the model pa…
Comparison between textured SnO2:F and Mo contacts with the p-type layer in p–i–n hydrogenate amorphous silicon solar cells by forward bias impedance…
2013
Abstract In this paper we compare the performance of the textured SnO2:F and Mo contacts with the p-type layer in p–i–n hydrogenate amorphous silicon (a-Si:H) solar cells. We use standard current–voltage (I–V) electrical characterization methods coupled with forward bias small signal impedance analysis. We show the efficacy of this technique to determine the effective carrier lifetime in photovoltaic cells. We show that such effective lifetimes are indeed directly connected to the respective dark diode saturation currents. We also find that the effective lifetime is constant with the temperature in the 0–70 °C range and it is significantly better for the solar cell with Mo diode contact. Th…
An accurate one-diode model suited to represent the current-voltage characteristics of crystalline and thin-film photovoltaic modules
2020
Abstract In this paper a new one-diode model, conceived in order to be used to represent the current-voltage curves of both crystalline and thin-film photovoltaic modules, is presented. The model parameters are calculated from the information contained in the datasheets issued by manufactures by means of simple iterative procedures that do not require the assumption of simplifying hypotheses. Some innovative relations describing the dependence of the parameters from the solar irradiance and cell temperature are adopted in order to permit the model to reliably simulate the electrical behaviour of photovoltaic devices operating in real conditions. The ability of the model to calculate the cur…