Search results for "Pitting"
showing 10 items of 43 documents
Evolving by deleting: patterns of molecular evolution of Apple stem pitting virus isolates from Poland
2019
In this study, 267 coat protein gene (CP) sequences from 48 Polish isolates of Apple stem pitting virus (ASPV) were determined. The genetic structure of the virus population was analysed and possible mechanisms of molecular evolution explored. We found evidence of recombination within the ASPV population and the presence of 17 ASPV molecular variants that differ in the length, number and arrangement of deletions in the CP. Population genetic analyses showed significant variation among isolates from pear and apple trees, between isolates from the same host species and, more interestingly, within isolates, supporting the existence of significant levels of variability within individual hosts, …
Influence of Centerline Intermetallic Stringers on Pitting Corrosion Resistance of Superduplex Stainless Steel
2021
Superduplex stainless steel UNS S32750 / EN 1.4410 is commonly used in marine environment, petrochemical, oil and gas, chemical and desalination industries, requiring materials with superior corrosion and mechanical properties. Very few residual intermetallic particles may be present under the form of centerline stringers whose effects on corrosion properties are not well documented. A previous study demonstrated the negligible influence of the intermetallic phases in centerline stringers (typically < 0.1% over thickness) on the hydrogen embrittlement susceptibility of superduplex stainless steel [1]. The present study aims at highlighting the impact of centerline intermetallic stringers on…
Conversion electron Mössbauer study of low carbon steel polarized in aqueous sulfate and sulfite containing sulfate solutions
1993
Abstract The passivation of low carbon steel was studied in aqueous solutions of 0.5 M Na 2 SO 4 (pH = 3.5 and 6.5) and of 0.5 M Na 2 SO 4 + 0.001 M NaHSO 3 (pH 3.5 and 6.5). The used conversion electron Mossbauer spectroscopy (CEMS) with the complementary electrochemical, microscopic and spectrophotometric investigations proved that the presence of sulfite ion induces pitting corrosion. The compositions and thichnesses of the passive films formed during the electrochemical treatments are determined from the conversion electron Mossbauer spectra. γ-FeOOH was found in each case as a major component. At pH = 3.5, the sextet belonging to Fe 3 C appears in the spectra in most cases, and also Fe…
SVET, AFM and AES study of pitting corrosion initiated on MnS inclusions by microinjection
2003
As pitting is a random phenomenon, it is difficult to predict where a pit will appear on the surface and consequently the use of local probes is rendered difficult. In this work, a new method to study pitting corrosion on a MnS inclusion on 316L stainless steel is proposed. It consists in modifying locally the chemistry in its vicinity by injecting with a microcapillary an aggressive solution of NaCl, H2SO4 or HCl. Once a pit appears, scanning vibrating electrode technique (SVET) is used to follow the current fluctuations over and around the pit when the metal is polarized at a passive potential. In another series of experiments the effect of local activation of MnS inclusion was studied ex…
Influence of the grain orientation spread on the pitting corrosion resistance of duplex stainless steels using electron backscatter diffraction and c…
2013
Abstract The corrosion behavior of UNS S32202 duplex stainless steel was studied by combining electron backscatter diffraction (EBSD) measurements and critical pitting temperature tests at the microscale. The grain orientation spread (GOS) value was determined in grains of both phases from EBSD data. It was shown that austenitic sites containing extremely small ferrite grains having a GOS value greater than 1.3° were precursor sites for pitting in 4 M NaCl. The critical pitting temperature range was 45–90 °C. All the other sites of both phases remained passive up to 100 °C.
Study of the mechanical effects on passivity breakdown by local probe techniques
2006
This paper aims at demonstrating that a relationship exists between surface stress and pitting corrosion. The surface stress field generated by polishing was first calculated using a thermo-mechanical model and a finite element code. Pitting corrosion tests performed at the microscale along the austenite/ferrite interface using the electrochemical microcell technique were then analyzed considering the microstructure and the residual surface stress field. Mechano-chemical criteria are proposed leading to an enhancement of pitting corrosion of duplex steels.
Local electrochemical impedance measurements on inclusion-containing stainless steels using microcapillary-based techniques
2009
MnS inclusions are good precursor sites for pitting corrosion of stainless steel. The objective of this paper was to quantify the passive properties of resulfurized stainless steel after immersion in chloride media. This was done by combining microcapillary techniques with electrochemical impedance spectroscopy and numerical analysis (specific equivalent circuit). It was shown that sulfur species produced in the electrolyte during the dissolution of inclusions react with the native passive film to CrS and FeSO 4 . Local electrochemical impedance spectroscopy measurements provided data describing the behaviour of the affected matrix at the microscale. For example, the value of the charge tra…
Contribution to the study of physico-chemical properties of surfaces modified by last treatment : application to the enhancement of localized corrosi…
2011
Metallic materials are more and more used in severe conditions with particularly strong request for improving their behavior in aggressive environment and especially over long periods. The objective of this PhD work is to estimate the potentiality of a laser surface melting treatment on the improvement of the stainless steel 304L corrosion resistance, surface treatments by laser can be revisited on the basis of a recent change in the laser technology. In the frame of this work, a nano-pulsed laser fiber was chosen : it allows the treated surface to be melted for few microns in depth, followed by an ultra-fast solidification occuring with cooling rates up to 1011 K/s. The combination of thes…
Flexural behavior of corroded RC beams
2018
Synopsis: A handily model to evaluate the bending resistance and the ductility of corroded beams critical in flexure and shear is proposed and debated. Effects of diffused and pitting corrosion on steel bars, compressive concrete strength reduction and concrete bond strength reduction due to rust creation are modelled. Practical method derived on limit state theory was here used to calculate the flexural and shear strength and the available ductility. The effectiveness of the model was also corroborated against numerous results collected in the literature pertaining to bending and shear resistance.
Nanosecond laser surface modification of AISI 304L stainless steel: Influence the beam overlap on pitting corrosion resistance
2014
Abstract Surface modifications of AISI 304L stainless steel by laser surface melting (LSM) were investigated using a nanosecond pulsed laser-fibre doped by ytterbium at different overlaps. The objective was to study the change in the corrosion properties induced by the treatment of the outer-surface of the stainless steel without modification of the bulk material. Different analytical techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and glow discharge optical emission spectrometry (GDOES) were used to characterize the laser-melted surface. The corrosion resistance was evaluated in a chloride solution at room temperature by electrochemical tests. The results sh…