Search results for "Polybutadiene"
showing 10 items of 49 documents
Characterizations of Thermoplastic Block Elastomers Based on Polybutadiene and ε -Caprolactone
2010
A broad series of tri- and multiblock copolymers based on linear and branched oligomers of polybutadiene as central blocks and polycaprolactone (PCL) as block extremities are characterized by SEC, DSC, DMA, Dynamical Rheology and DRX. DSC analyses reveal phase separation between the two amorphous PB and PCL phases. By thermal analysis, the glass transition temperature of PCL is only detected for materials containing at least 80% w/w of PCL. This is attributed to the small length of the polyester blocks for copolymers containing less than 80% w/w of PCL. The increase of fusion heat with increasing PCL content in the copolymers is correlated to the greater ability of PCL chains to rearrange a…
New amphiphilic poly(butadiene)-graft-poly(ethylene oxide)s
1995
Amphiphilic graft copolymers with a poly(butadiene) backbone and poly(ethylene oxide) side chains were synthesized by grafting isocyanateterminated poly(ethylene oxide) on to partially hydroxylated poly(butadiene). The graft copolymers are water soluble if the fraction of hydrophilic poly(ethylene oxide) exceeds 50 wt%. Solutions of graft copolymers in water and tetrahydrofuran were studied by static light scattering and viscosity measurements. By dynamic light scattering in solution it was shown that the graft copolymers form clusters.
Mechanical and rheological properties of polystyrene-block-polybutadiene-block-polystyrene copolymer reinforced with carbon nanotubes: effect of proc…
2017
Abstract Styrene-b-butadiene-b-styrene (SBS)-based nanocomposites filled with unmodified and –COOH functionalized carbon nanotubes (CNTs) have been formulated at different processing conditions in order to provide an understanding of the influence of the processing temperature and mixing speed on the nanofillers dispersion and on the overall properties of the nanocomposites. The evaluation of the nanocomposites’ mechanical and rheological behavior reveals that the effect of the processing speed on the final properties is almost negligible. Differently, the processing temperature influences strongly the mechanical and rheological properties of SBS-based nanocomposites. Indeed, for the nanoco…
Infrared spectroscopy on new multiphase thermoplastic elastomers based on hydrogen bond complexes - temperature dependence and orientation behaviour
1991
The structure and deformation behaviour of a new class of thermoplastic elastomers is studied by temperature dependent infrared (IR) spectroscopy and by IR - dichroism spectroscopy. The thermoplastic elastomer is based on polybutadiene with statistically distributed side groups which form an anisotropic supramolecular structure via hydrogen bonds. Changes in the IR spectra at elevated temperatures are related to the melting of the ordered structure. The uniaxial deformation behaviour is studied by linear dichroism Fourier-transform (FT)-IR spectroscopy. A deformation model is developed which accounts for the major experimental results: while the polybutadiene segments behave as flexible cha…
Thermal behavior and spherulitic superstructures of SBC triblock copolymers based on polystyrene (S), polybutadiene (B) and a crystallizable poly(ɛ-c…
1996
The dynamic crystallization and the melting behavior of polystyrene-block-poly(e-caprolactone) (PS-b-PCL, short notation SC), polybutadiene-block-poly(e-caprolactone) (PB-b-PCL, BC) and polystyrene-block-polybutadiene-block-poly(e-caprolactone) (PS-b-PB-b-PCL, SBC) have been studied using differential scanning calorimetry. The copolymers with high molecular weight exhibit microphase separation into microphases consisting of polystyrene, polybutadiene and poly(e-caprolactone) and partial crystallization of the corresponding PCL block. The crystallization occurs at temperatures below the PS glass transition. Depending on the block copolymer composition, crystallization takes place through a c…
Adsorption of di-and triblock copolymers with functionalized butadiene-styrene blocks from dilute solution
1995
Abstract The adsorption behaviour of functionalized polystyrene-block-polybutadiene diblock copolymers, P(S-b-B), and polybutadiene-block-polystyrene-block-polybutadiene triblock copolymers, P(B-b-S-b-B), from dilute solutions in toluene onto silicon wafers was investigated by means of null-ellipsometry. Polar 4-(3,5-dioxo- 1,2,4-triazolidin-4-yl) benzoic acid groups (urazole groups) were attached randomly to the butadiene blocks. The PS blocks and the PB blocks adsorb not on the substrate surface, but only on the polar functional groups. It was verified that the adsorbed amount does not depend on the number of functional groups nor on the degree of polymerization of the polybutadiene block…
Synthesis of a polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) triarm star copolymer
1996
The straightforward synthesis of a polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) triarm star copolymer has been successfully realized by a sequence of reactions which involves the sequential addition of a living polybutadienyllithium to a polystyrene macromonomer with a terminal 1,1-diphenylethylene unit and subsequent polymerization of methyl methacrylate. The high-molecular-weight polystyrene-arm-polybutadiene-arm-poly(methyl methacrylate) star copolymer shows microphase separation into three phases.
Surface reconstruction of the lamellar morphology in a symmetric poly(styrene-block-butadiene-block-methyl methacrylate) triblock copolymer: A tappin…
1996
The surface morphology of a symmetric poly(styrene-block-butadiene-block-methyl methacrylate) triblock copolymer (PS-b-PB-b-PMMA) with 6 wt % PB has been investigated by tapping mode scanning force microscopy (SFM). The results are compared to the bulk morphology as determined by transmission electron microscopy (TEM). In solvent-cast films PS/PMMA lamellae are formed, which are oriented nearly perpendicular to the free surface. Like in the bulk, also at the free film surface polybutadiene spheres are located at the lamellar PS/PMMA interface. However, contrary to the bulk, the surface morphology includes a large number of defects such as curved lamellar and disclinations, and the lamellar …
Polybutadiene model networks —synthesis, mechanical characterization and comparison with rubber elasticity models
1995
Model networks of defined crosslink density are prepared via nonradical statistical crosslinking of polybutadiene in bulk and concentrated solution using a masked bistriazolinedione as crosslinker. The kinetics of crosslinking is monitored by FT-IR-spectroscopy. The reaction follows pseudo-1st-order reaction kinetics. The activation parameter of the crosslinking reaction is estimated from crosslinking at various temperatures. Networks of deuterated polybutadiene are prepared by this reaction in a wide range of crosslink densities. The stress strain behavior is analyzed according to the Junction Constraint-Theory of rubber elasticity (JCT) and to the approach introduced by Graessley accounti…
Artificial multiple criticality and phase equilibria: an investigation of the PC-SAFT approach
2005
The perturbed-chain statistical associating fluid theory (PC-SAFT) is studied for a wide range of temperature, T, pressure, p, and (effective) chain length, m, to establish the generic phase diagram of polymers according to this theory. In addition to the expected gas-liquid coexistence, two additional phase separations are found, termed "gas-gas" equilibrium (at very low densities) and "liquid-liquid" equilibrium (at densities where the system is expected to be solid already). These phase separations imply that in one-component polymer systems three critical points occur, as well as equilibria of three fluid phases at triple points. However, Monte Carlo simulations of the corresponding sys…